[PATCH 2/3] spi: cadence-qspi: Fix compilation error in mini u-boot flash reset

[Ashok Reddy Soma]

When cadence_qspi_versal_flash_reset() function is called in mini
u-boot where there is no firmware support, it is missing defines for
macro's BOOT_MODE_POR_0 & BOOT_MODE_POR_1. Remove them and replace with
already define macro's which have same values as these.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma at amd.com>
---

(no changes since v1)

 drivers/spi/cadence_ospi_versal.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/cadence_ospi_versal.c b/drivers/spi/cadence_ospi_versal.c
index a9547a8200..e0d5e6b9e6 100644
--- a/drivers/spi/cadence_ospi_versal.c
+++ b/drivers/spi/cadence_ospi_versal.c
@@ -182,11 +182,11 @@ int cadence_qspi_versal_flash_reset(struct udevice *dev)
 
 	/* set direction as output */
 	writel((readl(BOOT_MODE_DIR) | BIT(FLASH_RESET_GPIO)),
-	       BOOT_MODE_POR_0);
+	       BOOT_MODE_DIR);
 
 	/* Data output enable */
 	writel((readl(BOOT_MODE_OUT) | BIT(FLASH_RESET_GPIO)),
-	       BOOT_MODE_POR_1);
+	       BOOT_MODE_OUT);
 
 	/* IOU SLCR write enable */
 	writel(0, WPROT_PMC_MIO);
-- 
2.17.1