[PATCH 10/38] arm920t: Remove unused imx code

Tom Rini trini at konsulko.com
Sun Nov 20 00:45:17 CET 2022


This code is currently unused, remove it.

Signed-off-by: Tom Rini <trini at konsulko.com>
---
 arch/arm/cpu/arm920t/imx/Makefile  |   8 ---
 arch/arm/cpu/arm920t/imx/generic.c |  76 ----------------------
 arch/arm/cpu/arm920t/imx/speed.c   |  86 -------------------------
 arch/arm/cpu/arm920t/imx/timer.c   | 100 -----------------------------
 4 files changed, 270 deletions(-)
 delete mode 100644 arch/arm/cpu/arm920t/imx/Makefile
 delete mode 100644 arch/arm/cpu/arm920t/imx/generic.c
 delete mode 100644 arch/arm/cpu/arm920t/imx/speed.c
 delete mode 100644 arch/arm/cpu/arm920t/imx/timer.c

diff --git a/arch/arm/cpu/arm920t/imx/Makefile b/arch/arm/cpu/arm920t/imx/Makefile
deleted file mode 100644
index 04bc1295929c..000000000000
--- a/arch/arm/cpu/arm920t/imx/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-obj-y	+= generic.o
-obj-y	+= speed.o
-obj-y	+= timer.o
diff --git a/arch/arm/cpu/arm920t/imx/generic.c b/arch/arm/cpu/arm920t/imx/generic.c
deleted file mode 100644
index dbb908ecdcb2..000000000000
--- a/arch/arm/cpu/arm920t/imx/generic.c
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *  arch/arm/mach-imx/generic.c
- *
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX machines
- */
-
-#include <common.h>
-
-#ifdef CONFIG_IMX
-
-#include <asm/arch/imx-regs.h>
-
-void imx_gpio_mode(int gpio_mode)
-{
-	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> 5;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> 10;
-	unsigned int tmp;
-
-	/* Pullup enable */
-	if(gpio_mode & GPIO_PUEN)
-		PUEN(port) |= (1<<pin);
-	else
-		PUEN(port) &= ~(1<<pin);
-
-	/* Data direction */
-	if(gpio_mode & GPIO_OUT)
-		DDIR(port) |= 1<<pin;
-	else
-		DDIR(port) &= ~(1<<pin);
-
-	/* Primary / alternate function */
-	if(gpio_mode & GPIO_AF)
-		GPR(port) |= (1<<pin);
-	else
-		GPR(port) &= ~(1<<pin);
-
-	/* use as gpio? */
-	if( ocr == 3 )
-		GIUS(port) |= (1<<pin);
-	else
-		GIUS(port) &= ~(1<<pin);
-
-	/* Output / input configuration */
-	/* FIXME: I'm not very sure about OCR and ICONF, someone
-	 * should have a look over it
-	 */
-	if(pin<16) {
-		tmp = OCR1(port);
-		tmp &= ~( 3<<(pin*2));
-		tmp |= (ocr << (pin*2));
-		OCR1(port) = tmp;
-
-		if( gpio_mode &	GPIO_AOUT )
-			ICONFA1(port) &= ~( 3<<(pin*2));
-		if( gpio_mode &	GPIO_BOUT )
-			ICONFB1(port) &= ~( 3<<(pin*2));
-	} else {
-		tmp = OCR2(port);
-		tmp &= ~( 3<<((pin-16)*2));
-		tmp |= (ocr << ((pin-16)*2));
-		OCR2(port) = tmp;
-
-		if( gpio_mode &	GPIO_AOUT )
-			ICONFA2(port) &= ~( 3<<((pin-16)*2));
-		if( gpio_mode &	GPIO_BOUT )
-			ICONFB2(port) &= ~( 3<<((pin-16)*2));
-	}
-}
-
-#endif /* CONFIG_IMX */
diff --git a/arch/arm/cpu/arm920t/imx/speed.c b/arch/arm/cpu/arm920t/imx/speed.c
deleted file mode 100644
index c19206ac39a7..000000000000
--- a/arch/arm/cpu/arm920t/imx/speed.c
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * (c) 2004 Sascha Hauer <sascha at saschahauer.de>
- */
-
-
-#include <common.h>
-#if defined (CONFIG_IMX)
-#include <clock_legacy.h>
-
-#include <asm/arch/imx-regs.h>
-
-/* ------------------------------------------------------------------------- */
-/* NOTE: This describes the proper use of this file.
- *
- * get_board_sys_clk() should be defined as the input frequency of the PLL.
- * SH FIXME: 16780000 in our case
- * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
- * the specified bus in HZ.
- */
-/* ------------------------------------------------------------------------- */
-
-ulong get_systemPLLCLK(void)
-{
-	/* FIXME: We assume System_SEL = 0 here */
-	u32 spctl0 = SPCTL0;
-	u32 mfi = (spctl0 >> 10) & 0xf;
-	u32 mfn = spctl0 & 0x3f;
-	u32 mfd = (spctl0 >> 16) & 0x3f;
-	u32 pd =  (spctl0 >> 26) & 0xf;
-
-	mfi = mfi<=5 ? 5 : mfi;
-
-	return (2*(CONFIG_SYSPLL_CLK_FREQ>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1);
-}
-
-ulong get_mcuPLLCLK(void)
-{
-	/* FIXME: We assume System_SEL = 0 here */
-	u32 mpctl0 = MPCTL0;
-	u32 mfi = (mpctl0 >> 10) & 0xf;
-	u32 mfn = mpctl0 & 0x3f;
-	u32 mfd = (mpctl0 >> 16) & 0x3f;
-	u32 pd =  (mpctl0 >> 26) & 0xf;
-
-	mfi = mfi<=5 ? 5 : mfi;
-
-	return (2*(get_board_sys_clk()>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1);
-}
-
-ulong get_FCLK(void)
-{
-	return (( CSCR>>15)&1) ? get_mcuPLLCLK()>>1 : get_mcuPLLCLK();
-}
-
-/* return HCLK frequency */
-ulong get_HCLK(void)
-{
-	u32 bclkdiv = (( CSCR >> 10 ) & 0xf) + 1;
-	printf("bclkdiv: %d\n", bclkdiv);
-	return get_systemPLLCLK() / bclkdiv;
-}
-
-/* return BCLK frequency */
-ulong get_BCLK(void)
-{
-	return get_HCLK();
-}
-
-ulong get_PERCLK1(void)
-{
-	return get_systemPLLCLK() / (((PCDR) & 0xf)+1);
-}
-
-ulong get_PERCLK2(void)
-{
-	return get_systemPLLCLK() / (((PCDR>>4) & 0xf)+1);
-}
-
-ulong get_PERCLK3(void)
-{
-	return get_systemPLLCLK() / (((PCDR>>16) & 0x7f)+1);
-}
-
-#endif /* defined (CONFIG_IMX) */
diff --git a/arch/arm/cpu/arm920t/imx/timer.c b/arch/arm/cpu/arm920t/imx/timer.c
deleted file mode 100644
index 0cd3a039810b..000000000000
--- a/arch/arm/cpu/arm920t/imx/timer.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger at sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu at sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj at denx.de>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <time.h>
-#if defined (CONFIG_IMX)
-
-#include <asm/arch/imx-regs.h>
-#include <linux/delay.h>
-
-int timer_init (void)
-{
-	int i;
-	/* setup GP Timer 1 */
-	TCTL1 = TCTL_SWR;
-	for ( i=0; i<100; i++) TCTL1 = 0; /* We have no udelay by now */
-	TPRER1 = get_PERCLK1() / 1000000; /* 1 MHz */
-	TCTL1 |= TCTL_FRR | (1<<1); /* Freerun Mode, PERCLK1 input */
-
-	/* Reset the timer */
-	TCTL1 &= ~TCTL_TEN;
-	TCTL1 |= TCTL_TEN; /* Enable timer */
-
-	return (0);
-}
-
-/*
- * timer without interrupts
- */
-static ulong get_timer_masked (void)
-{
-	return TCN1;
-}
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-void __udelay(unsigned long usec)
-{
-	ulong endtime = get_timer_masked() + usec;
-	signed long diff;
-
-	do {
-		ulong now = get_timer_masked ();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	return CONFIG_SYS_HZ;
-}
-
-/*
- * Reset the cpu by setting up the watchdog timer and let him time out
- */
-void reset_cpu(void)
-{
-	/* Disable watchdog and set Time-Out field to 0 */
-	WCR = 0x00000000;
-
-	/* Write Service Sequence */
-	WSR = 0x00005555;
-	WSR = 0x0000AAAA;
-
-	/* Enable watchdog */
-	WCR = 0x00000001;
-
-	while (1);
-	/*NOTREACHED*/
-}
-
-#endif /* defined (CONFIG_IMX) */
-- 
2.25.1



More information about the U-Boot mailing list