[PoC 122/241] global: Migrate CONFIG_MONITOR_IS_IN_RAM to CFG
Tom Rini
trini at konsulko.com
Sun Nov 20 15:07:12 CET 2022
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/m68k/cpu/mcf52x2/cpu_init.c | 12 ++++++------
arch/m68k/cpu/mcf52x2/start.S | 4 ++--
arch/m68k/cpu/mcf530x/start.S | 4 ++--
arch/m68k/cpu/mcf532x/speed.c | 4 ++--
arch/m68k/cpu/mcf532x/start.S | 6 +++---
board/astro/mcf5373l/mcf5373l.c | 2 +-
board/cobra5272/README | 8 ++++----
board/freescale/m53017evb/README | 2 +-
board/freescale/m5373evb/README | 2 +-
doc/arch/m68k.rst | 2 +-
drivers/mtd/cfi_flash.c | 2 +-
include/configs/10m50_devboard.h | 2 +-
include/configs/3c120_devboard.h | 2 +-
include/configs/M5249EVB.h | 2 +-
include/configs/M5272C3.h | 2 +-
include/configs/M5282EVB.h | 2 +-
include/configs/astro_mcf5373l.h | 12 +-----------
include/configs/cobra5272.h | 21 ---------------------
include/configs/eb_cpu5282.h | 2 +-
scripts/config_whitelist.txt | 2 +-
20 files changed, 32 insertions(+), 63 deletions(-)
diff --git a/arch/m68k/cpu/mcf52x2/cpu_init.c b/arch/m68k/cpu/mcf52x2/cpu_init.c
index 99eb61f16758..1d6e39a2ce5e 100644
--- a/arch/m68k/cpu/mcf52x2/cpu_init.c
+++ b/arch/m68k/cpu/mcf52x2/cpu_init.c
@@ -334,7 +334,7 @@ void cpu_init_f(void)
/* if we come from RAM we assume the CPU is
* already initialized.
*/
-#ifndef CONFIG_MONITOR_IS_IN_RAM
+#ifndef CFG_MONITOR_IS_IN_RAM
sysctrl_t *sysctrl = (sysctrl_t *) (CFG_SYS_MBAR);
gpio_t *gpio = (gpio_t *) (MMAP_GPIO);
csctrl_t *csctrl = (csctrl_t *) (MMAP_FBCS);
@@ -390,7 +390,7 @@ void cpu_init_f(void)
out_be32(&csctrl->cs_or7, CONFIG_SYS_OR7_PRELIM);
#endif
-#endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */
+#endif /* #ifndef CFG_MONITOR_IS_IN_RAM */
/* enable instruction cache now */
icache_enable();
@@ -460,7 +460,7 @@ void cpu_init_f(void)
* already initialized.
*/
-#ifndef CONFIG_MONITOR_IS_IN_RAM
+#ifndef CFG_MONITOR_IS_IN_RAM
wdog_t *wdog_reg = (wdog_t *) (MMAP_WDOG);
gpio_t *gpio_reg = (gpio_t *) (MMAP_GPIO);
@@ -469,7 +469,7 @@ void cpu_init_f(void)
/* FlexBus Chipselect */
init_fbcs();
-#endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */
+#endif /* #ifndef CFG_MONITOR_IS_IN_RAM */
#ifdef CONFIG_SYS_I2C_FSL
CFG_SYS_I2C_PINMUX_REG &= CFG_SYS_I2C_PINMUX_CLR;
@@ -557,7 +557,7 @@ void cpu_init_f(void)
MCFWTM_WCR = 0;
#endif
-#ifndef CONFIG_MONITOR_IS_IN_RAM
+#ifndef CFG_MONITOR_IS_IN_RAM
/* Set speed /PLL */
MCFCLOCK_SYNCR =
MCFCLOCK_SYNCR_MFD(CFG_SYS_MFD) |
@@ -614,7 +614,7 @@ void cpu_init_f(void)
/* FlexBus Chipselect */
init_fbcs();
-#endif /* CONFIG_MONITOR_IS_IN_RAM */
+#endif /* CFG_MONITOR_IS_IN_RAM */
/* defer enabling cache until boot (see do_go) */
/* icache_enable(); */
diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S
index d48d0192eea2..47d935d3d9f0 100644
--- a/arch/m68k/cpu/mcf52x2/start.S
+++ b/arch/m68k/cpu/mcf52x2/start.S
@@ -25,7 +25,7 @@
/* If we come from a pre-loader we don't need an initial exception
* table.
*/
-#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+#if !defined(CFG_MONITOR_IS_IN_RAM)
.text
@@ -164,7 +164,7 @@ _after_flashbar_copy:
* if we come from a pre-loader we have no exception table and
* therefore no VBR to set
*/
-#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+#if !defined(CFG_MONITOR_IS_IN_RAM)
#if defined(CONFIG_M5282) && (CONFIG_TEXT_BASE == CFG_SYS_INT_FLASH_BASE)
move.l #CFG_SYS_INT_FLASH_BASE, %d0
#else
diff --git a/arch/m68k/cpu/mcf530x/start.S b/arch/m68k/cpu/mcf530x/start.S
index dbe2b54e4101..4d474576457e 100644
--- a/arch/m68k/cpu/mcf530x/start.S
+++ b/arch/m68k/cpu/mcf530x/start.S
@@ -27,7 +27,7 @@
/* If we come from a pre-loader we don't need an initial exception
* table.
*/
-#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+#if !defined(CFG_MONITOR_IS_IN_RAM)
.text
@@ -109,7 +109,7 @@ _start:
* if we come from a pre-loader we have no exception table and
* therefore no VBR to set
*/
-#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+#if !defined(CFG_MONITOR_IS_IN_RAM)
move.l #CFG_SYS_FLASH_BASE, %d0
movec %d0, %VBR
#endif
diff --git a/arch/m68k/cpu/mcf532x/speed.c b/arch/m68k/cpu/mcf532x/speed.c
index 32ffac08135d..f58f84f976ce 100644
--- a/arch/m68k/cpu/mcf532x/speed.c
+++ b/arch/m68k/cpu/mcf532x/speed.c
@@ -192,7 +192,7 @@ int clock_pll(int fsys, int flags)
#endif
/* must not tamper with SDRAMC if running from SDRAM */
-#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+#if !defined(CFG_MONITOR_IS_IN_RAM)
/*
* Check to see if the SDRAM has already been initialized.
* If it has then the SDRAM needs to be put into self refresh
@@ -244,7 +244,7 @@ int clock_pll(int fsys, int flags)
/* wait for DQS logic to relock */
for (i = 0; i < 0x200; i++) ;
-#endif /* !defined(CONFIG_MONITOR_IS_IN_RAM) */
+#endif /* !defined(CFG_MONITOR_IS_IN_RAM) */
return fout;
}
diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S
index 72a2f99b7dd2..4e6f2b8621d7 100644
--- a/arch/m68k/cpu/mcf532x/start.S
+++ b/arch/m68k/cpu/mcf532x/start.S
@@ -24,7 +24,7 @@
addl #60,%sp; /* space for 15 regs */ \
rte;
-#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+#if !defined(CFG_MONITOR_IS_IN_RAM)
.text
@@ -86,7 +86,7 @@ vector192_255:
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-#endif /* !defined(CONFIG_MONITOR_IS_IN_RAM) */
+#endif /* !defined(CFG_MONITOR_IS_IN_RAM) */
.text
@@ -96,7 +96,7 @@ _start:
nop
move.w #0x2700,%sr /* Mask off Interrupt */
-#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+#if !defined(CFG_MONITOR_IS_IN_RAM)
/* Set vector base register at the beginning of the Flash */
move.l #CFG_SYS_FLASH_BASE, %d0
movec %d0, %VBR
diff --git a/board/astro/mcf5373l/mcf5373l.c b/board/astro/mcf5373l/mcf5373l.c
index 43563c412793..c6172365744a 100644
--- a/board/astro/mcf5373l/mcf5373l.c
+++ b/board/astro/mcf5373l/mcf5373l.c
@@ -32,7 +32,7 @@ int checkboard(void)
int dram_init(void)
{
-#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+#if !defined(CFG_MONITOR_IS_IN_RAM)
sdram_t *sdp = (sdram_t *)(MMAP_SDRAM);
/*
diff --git a/board/cobra5272/README b/board/cobra5272/README
index ac62e557a075..770b66327ef5 100644
--- a/board/cobra5272/README
+++ b/board/cobra5272/README
@@ -79,10 +79,10 @@ please first check:
in ./include/configs/cobra5272.h
- CONFIG_MONITOR_IS_IN_RAM has to be undefined, e. g. as follows:
+ CFG_MONITOR_IS_IN_RAM has to be undefined, e. g. as follows:
#if 0
- #define CONFIG_MONITOR_IS_IN_RAM
+ #define CFG_MONITOR_IS_IN_RAM
/* define if monitor is started from a pre-loader */
#endif
@@ -118,10 +118,10 @@ please modify the settings:
in ./include/configs/cobra5272.h
- CONFIG_MONITOR_IS_IN_RAM now has to be defined, e. g. as follows:
+ CFG_MONITOR_IS_IN_RAM now has to be defined, e. g. as follows:
#if 1
- #define CONFIG_MONITOR_IS_IN_RAM
+ #define CFG_MONITOR_IS_IN_RAM
/*define if monitor is started from a pre-loader */
#endif
diff --git a/board/freescale/m53017evb/README b/board/freescale/m53017evb/README
index 34f05f3fdc72..193ba9394ac3 100644
--- a/board/freescale/m53017evb/README
+++ b/board/freescale/m53017evb/README
@@ -98,7 +98,7 @@ CONFIG_SYS_IMMR -- define for MBAR offset
CFG_SYS_MBAR -- define MBAR offset
-CONFIG_MONITOR_IS_IN_RAM -- Not support
+CFG_MONITOR_IS_IN_RAM -- Not support
CFG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5301x internal SRAM
diff --git a/board/freescale/m5373evb/README b/board/freescale/m5373evb/README
index 7240648796b5..807785cb4ff5 100644
--- a/board/freescale/m5373evb/README
+++ b/board/freescale/m5373evb/README
@@ -97,7 +97,7 @@ CONFIG_SYS_IMMR -- define for MBAR offset
CFG_SYS_MBAR -- define MBAR offset
-CONFIG_MONITOR_IS_IN_RAM -- Not support
+CFG_MONITOR_IS_IN_RAM -- Not support
CFG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5373 internal SRAM
diff --git a/doc/arch/m68k.rst b/doc/arch/m68k.rst
index 770327fea21a..dc2a41d4e990 100644
--- a/doc/arch/m68k.rst
+++ b/doc/arch/m68k.rst
@@ -93,7 +93,7 @@ Configuration to use a pre-loader
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If U-Boot should be loaded to RAM and started by a pre-loader
-CONFIG_MONITOR_IS_IN_RAM must be defined. If it is defined the
+CFG_MONITOR_IS_IN_RAM must be defined. If it is defined the
initial vector table and basic processor initialization will not
be compiled in. The start address of U-Boot must be adjusted in
the boards config header file (CONFIG_SYS_MONITOR_BASE) and Makefile
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index f3abe7842b69..0461aa1adbed 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -2360,7 +2360,7 @@ static void flash_protect_default(void)
/* Monitor protection ON by default */
#if defined(CONFIG_SYS_MONITOR_BASE) && \
(CONFIG_SYS_MONITOR_BASE >= CFG_SYS_FLASH_BASE) && \
- (!defined(CONFIG_MONITOR_IS_IN_RAM))
+ (!defined(CFG_MONITOR_IS_IN_RAM))
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_MONITOR_BASE,
CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
diff --git a/include/configs/10m50_devboard.h b/include/configs/10m50_devboard.h
index 3a4fbc6eab83..cc22a4724aaa 100644
--- a/include/configs/10m50_devboard.h
+++ b/include/configs/10m50_devboard.h
@@ -32,6 +32,6 @@
*/
#define CFG_SYS_SDRAM_BASE 0xc8000000
#define CFG_SYS_SDRAM_SIZE 0x08000000
-#define CONFIG_MONITOR_IS_IN_RAM
+#define CFG_MONITOR_IS_IN_RAM
#endif /* __CONFIG_H */
diff --git a/include/configs/3c120_devboard.h b/include/configs/3c120_devboard.h
index ab889180eede..556f31efe59f 100644
--- a/include/configs/3c120_devboard.h
+++ b/include/configs/3c120_devboard.h
@@ -28,6 +28,6 @@
*/
#define CFG_SYS_SDRAM_BASE 0xD0000000
#define CFG_SYS_SDRAM_SIZE 0x08000000
-#define CONFIG_MONITOR_IS_IN_RAM
+#define CFG_MONITOR_IS_IN_RAM
#endif /* __CONFIG_H */
diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h
index 0e38eeb4a365..4a9e9ed882ac 100644
--- a/include/configs/M5249EVB.h
+++ b/include/configs/M5249EVB.h
@@ -20,7 +20,7 @@
#define CFG_SYS_UART_PORT (0)
-#undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */
+#undef CFG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */
/*
* Clock configuration: enable only one of the following options
diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index 4b88cfc2cdd9..99f1df087e36 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -19,7 +19,7 @@
#define CFG_SYS_UART_PORT (0)
-#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */
+#undef CFG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */
/* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index f34985c47d4b..4b20da4a23eb 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -19,7 +19,7 @@
#define CFG_SYS_UART_PORT (0)
-#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */
+#undef CFG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */
/* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index 8f4419f402f7..fe49b04609cf 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -45,7 +45,7 @@
* boards.
*/
#ifdef CONFIG_RAM
-#define CONFIG_MONITOR_IS_IN_RAM
+#define CFG_MONITOR_IS_IN_RAM
#endif
/* I2C */
@@ -74,16 +74,6 @@
* Environment is located in the last sector of the flash
*/
-#ifndef CONFIG_MONITOR_IS_IN_RAM
-#else
-/*
- * environment in RAM - This is used to use a single PC-based application
- * to load an image, load U-Boot, load an environment and then start U-Boot
- * to execute the commands from the environment. Feedback is done via setting
- * and reading memory locations.
- */
-#endif
-
/* here we put our FPGA configuration... */
/* Define user parameters that have to be customized most likely */
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index 1b5115f7caf1..b0acdb2e7d62 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -42,27 +42,6 @@
#define CFG_SYS_UART_PORT (0)
-/* ---
- * CONFIG_MONITOR_IS_IN_RAM defines if u-boot is started from a different
- * bootloader residing in flash ('chainloading'); if you want to use
- * chainloading or want to compile a u-boot binary that can be loaded into
- * RAM via BDM set
- * "#if 0" to "#if 1"
- * You will need a first stage bootloader then, e. g. colilo or a working BDM
- * cable (Background Debug Mode)
- *
- * Setting #if 0: u-boot will start from flash and relocate itself to RAM
- *
- * Please do not forget to modify the setting of CONFIG_TEXT_BASE
- * in board/cobra5272/config.mk accordingly (#if 0: 0xffe00000; #if 1: 0x20000)
- *
- * ---
- */
-
-#if 0
-#define CONFIG_MONITOR_IS_IN_RAM /* monitor is started from a preloader */
-#endif
-
/* ---
* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h
index a4370ca5c7cc..e8d85bdd78f2 100644
--- a/include/configs/eb_cpu5282.h
+++ b/include/configs/eb_cpu5282.h
@@ -14,7 +14,7 @@
#define CFG_SYS_UART_PORT (0)
-#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */
+#undef CFG_MONITOR_IS_IN_RAM /* starts uboot direct */
/*----------------------------------------------------------------------*
* Options *
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 4185a1b9c003..01f78d11afd8 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -130,7 +130,7 @@ CFG_MIU_2BIT_21_7_INTERLEAVED
CFG_MIU_2BIT_INTERLEAVED
CFG_MMC_DEFAULT_DEV
CFG_MMC_SUNXI_SLOT
-CONFIG_MONITOR_IS_IN_RAM
+CFG_MONITOR_IS_IN_RAM
CONFIG_MTD_NAND_VERIFY_WRITE
CONFIG_MVGBE_PORTS
CONFIG_MXC_GPT_HCLK
--
2.25.1
More information about the U-Boot
mailing list