[PoC 186/241] global: Migrate CONFIG_SLIC to CFG

[Tom Rini]

Signed-off-by: Tom Rini <trini at konsulko.com>
---
 board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 2 +-
 include/configs/p1_p2_rdb_pc.h              | 4 ++--
 scripts/config_whitelist.txt                | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index ab7972442970..9e26c201b7a8 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -187,7 +187,7 @@ void board_gpio_init(void)
 	setbits_be32(&pgpio->gpdat, 0x00080000);
 #endif
 
-#ifdef CONFIG_SLIC
+#ifdef CFG_SLIC
 	/* reset SLIC */
 	setbits_be32(&pgpio->gpdir, 0x00040000);
 	setbits_be32(&pgpio->gpdat, 0x00040000);
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index ccc000227b19..4ab2efd528d1 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -13,7 +13,7 @@
 #include <linux/stringify.h>
 
 #if defined(CONFIG_TARGET_P1020RDB_PC)
-#define CONFIG_SLIC
+#define CFG_SLIC
 #define __SW_BOOT_MASK		0x03
 #define __SW_BOOT_NOR		0x5c
 #define __SW_BOOT_SPI		0x1c
@@ -42,7 +42,7 @@
  * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off
  */
 #if defined(CONFIG_TARGET_P1020RDB_PD)
-#define CONFIG_SLIC
+#define CFG_SLIC
 #define __SW_BOOT_MASK		0x03
 #define __SW_BOOT_NOR		0x64
 #define __SW_BOOT_SPI		0x34
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 8a23b09ef5c0..c1129ffb9e53 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -195,7 +195,7 @@ CFG_SH_ETHER_PHY_ADDR
 CFG_SH_ETHER_PHY_MODE
 CFG_SH_ETHER_USE_PORT
 CFG_SH_QSPI_BASE
-CONFIG_SLIC
+CFG_SLIC
 CONFIG_SMDK5420
 CONFIG_SMP_PEN_ADDR
 CONFIG_SOCRATES
-- 
2.25.1