[PATCH 3/3] Nokia RX-51: Do not overwrite standard $loadaddr variable
Pali Rohár
pali at kernel.org
Sun Nov 20 17:56:28 CET 2022
Instead of overwriting $loadaddr variable, use custom temporary
$fileloadaddr variable. So scripts can access default/original address
stored in $loadaddr at build time.
Signed-off-by: Pali Rohár <pali at kernel.org>
---
include/configs/nokia_rx51.h | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index a88cfe77d50c..99a020c3c71d 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -78,15 +78,16 @@
"kernaddr=0x82008000\0" \
"initrdaddr=0x84008000\0" \
"scriptaddr=0x86008000\0" \
+ "fileloadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
- "${loadaddr} ${mmcfile}\0" \
- "kernload=setenv loadaddr ${kernaddr};" \
+ "${fileloadaddr} ${mmcfile}\0" \
+ "kernload=setenv fileloadaddr ${kernaddr};" \
"setenv mmcfile ${mmckernfile};" \
"run fileload\0" \
- "initrdload=setenv loadaddr ${initrdaddr};" \
+ "initrdload=setenv fileloadaddr ${initrdaddr};" \
"setenv mmcfile ${mmcinitrdfile};" \
"run fileload\0" \
- "scriptload=setenv loadaddr ${scriptaddr};" \
+ "scriptload=setenv fileloadaddr ${scriptaddr};" \
"setenv mmcfile ${mmcscriptfile};" \
"run fileload\0" \
"scriptboot=echo Running ${mmcscriptfile} from mmc " \
--
2.20.1
More information about the U-Boot
mailing list