[PATCH] xilinx: Remove unused ZYNQ_MAC_IN_EEPROM/ZYNQ_GEM_I2C_MAC_OFFSET entries

[Michal Simek]

The commit ba74bcf3e07b ("xilinx: common: Remove
zynq_board_read_rom_ethaddr()") removed zynq_board_read_rom_ethaddr()
because xlnx,eeprom link via DT chosen node is no longer used. But forget
to remove Kconfig entries which are used by this code only.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 board/xilinx/Kconfig                            | 17 -----------------
 ...azedev_cc_v1_0_ultrazedev_som_v1_0_defconfig |  2 --
 configs/syzygy_hub_defconfig                    |  2 --
 configs/xilinx_zynqmp_virt_defconfig            |  2 --
 4 files changed, 23 deletions(-)

diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig
index 746a2332ad5f..4ea78418780c 100644
--- a/board/xilinx/Kconfig
+++ b/board/xilinx/Kconfig
@@ -58,23 +58,6 @@ config BOOT_SCRIPT_OFFSET
 	help
 	   Specifies distro boot script offset in NAND/QSPI/NOR flash.
 
-config ZYNQ_MAC_IN_EEPROM
-	bool "Reading MAC address from EEPROM"
-	help
-	  Enable this option if your MAC address is saved in eeprom and
-	  xlnx,eeprom DT property in chosen node points to it.
-
-if ZYNQ_MAC_IN_EEPROM
-
-config ZYNQ_GEM_I2C_MAC_OFFSET
-	hex "Set the I2C MAC offset"
-	default 0x0
-	depends on DM_I2C
-	help
-	  Set the MAC offset for i2C.
-
-endif
-
 config CMD_FRU
 	bool "FRU information for product"
 	help
diff --git a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig
index 943b4da21d13..ce07f1633e04 100644
--- a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig
+++ b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig
@@ -8,8 +8,6 @@ CONFIG_DEFAULT_DEVICE_TREE="avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0"
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_ZYNQ_MAC_IN_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xfa
 CONFIG_ZYNQMP_PSU_INIT_ENABLED=y
 CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_DEBUG_UART=y
diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig
index acce95ec026c..179cb5221250 100644
--- a/configs/syzygy_hub_defconfig
+++ b/configs/syzygy_hub_defconfig
@@ -9,8 +9,6 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="zynq-syzygy-hub"
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_SPL=y
-CONFIG_ZYNQ_MAC_IN_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA
 CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_DEBUG_UART=y
 CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 9696e418daf5..4732c39bdbe1 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -13,8 +13,6 @@ CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x1E80000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_ZYNQ_MAC_IN_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
 CONFIG_CMD_FRU=y
 CONFIG_ZYNQMP_USB=y
 CONFIG_SYS_LOAD_ADDR=0x8000000
-- 
2.36.1