[PATCH 1/3] ram: ast2600: Fix incorrect statement of the register polling
Ryan Chen
ryan_chen at aspeedtech.com
Thu Nov 24 02:22:30 CET 2022
> -----Original Message-----
> From: Dylan Hung <dylan_hung at aspeedtech.com>
> Sent: Friday, November 11, 2022 3:30 PM
> To: Ryan Chen <ryan_chen at aspeedtech.com>; ChiaWei Wang
> <chiawei_wang at aspeedtech.com>; joel at jms.id.au; Dylan Hung
> <dylan_hung at aspeedtech.com>; u-boot at lists.denx.de
> Cc: BMC-SW <BMC-SW at aspeedtech.com>
> Subject: [PATCH 1/3] ram: ast2600: Fix incorrect statement of the register
> polling
>
> The condition "~data" in the if-statement is a typo. The original intention is
> to poll if SDRAM_PHYCTRL0_INIT bit equals to 0. So use "data == 0" for
> instead.
>
> Besides, the bit[1] of "phy_status" register is hardwired to
> SDRAM_PHYCTRL0_INIT (with inverse logic). Since SDRAM_PHYCTRL0_INIT has
> already done, remove the unnecessary checking of phy_status[1].
>
> Fixes: fde93143469f ("ram: aspeed: Add AST2600 DRAM control support")
>
> Signed-off-by: Dylan Hung <dylan_hung at aspeedtech.com>
Review-by: Ryan Chen <ryan_chen at aspeedtech.com>
> ---
> drivers/ram/aspeed/sdram_ast2600.c | 7 +------
> 1 file changed, 1 insertion(+), 6 deletions(-)
>
> diff --git a/drivers/ram/aspeed/sdram_ast2600.c
> b/drivers/ram/aspeed/sdram_ast2600.c
> index 9ad398d24155..b09232a30413 100644
> --- a/drivers/ram/aspeed/sdram_ast2600.c
> +++ b/drivers/ram/aspeed/sdram_ast2600.c
> @@ -449,7 +449,7 @@ static void ast2600_sdramphy_kick_training(struct
> dram_info *info)
>
> while (1) {
> data = readl(®s->phy_ctrl[0]) & SDRAM_PHYCTRL0_INIT;
> - if (~data)
> + if (data == 0)
> break;
> }
> }
> @@ -984,11 +984,6 @@ static int ast2600_sdrammc_probe(struct udevice
> *dev)
> L_ast2600_sdramphy_train:
> ast2600_sdrammc_init_ddr4(priv);
>
> - /* make sure DDR-PHY is ready before access */
> - do {
> - reg = readl(priv->phy_status) & BIT(1);
> - } while (reg == 0);
> -
> if (ast2600_sdramphy_check_status(priv) != 0) {
> printf("DDR4 PHY training fail, retrain\n");
> goto L_ast2600_sdramphy_train;
> --
> 2.25.1
More information about the U-Boot
mailing list