[PATCH 3/3] ARM: dts: at91: sama7g5/sama7g5ek: align DT with kernel 6.1
Claudiu.Beznea at microchip.com
Claudiu.Beznea at microchip.com
Fri Nov 25 09:28:02 CET 2022
On 25.11.2022 09:54, Eugen Hristev wrote:
> Align the DT with current Linux 6.1 tree, wherever possible.
>
> Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea at microchip.com>
> ---
> arch/arm/dts/at91-sama7g5ek.dts | 23 +++++++++++------------
> arch/arm/dts/sama7g5.dtsi | 27 ++++++++++++++++-----------
> 2 files changed, 27 insertions(+), 23 deletions(-)
>
> diff --git a/arch/arm/dts/at91-sama7g5ek.dts b/arch/arm/dts/at91-sama7g5ek.dts
> index aed84f15a1..9b247fcaf6 100644
> --- a/arch/arm/dts/at91-sama7g5ek.dts
> +++ b/arch/arm/dts/at91-sama7g5ek.dts
> @@ -45,13 +45,13 @@
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
>
> - bp1 {
> + button {
> label = "PB_USER";
> gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> @@ -244,8 +244,8 @@
> regulators {
> vdd_3v3: VDD_IO {
> regulator-name = "VDD_IO";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <3700000>;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> regulator-initial-mode = <2>;
> regulator-allowed-modes = <2>, <4>;
> regulator-always-on;
> @@ -264,8 +264,8 @@
>
> vddioddr: VDD_DDR {
> regulator-name = "VDD_DDR";
> - regulator-min-microvolt = <1300000>;
> - regulator-max-microvolt = <1450000>;
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> regulator-initial-mode = <2>;
> regulator-allowed-modes = <2>, <4>;
> regulator-always-on;
> @@ -285,8 +285,8 @@
>
> vddcore: VDD_CORE {
> regulator-name = "VDD_CORE";
> - regulator-min-microvolt = <1100000>;
> - regulator-max-microvolt = <1850000>;
> + regulator-min-microvolt = <1150000>;
> + regulator-max-microvolt = <1150000>;
> regulator-initial-mode = <2>;
> regulator-allowed-modes = <2>, <4>;
> regulator-always-on;
> @@ -306,7 +306,7 @@
> vddcpu: VDD_OTHER {
> regulator-name = "VDD_OTHER";
> regulator-min-microvolt = <1050000>;
> - regulator-max-microvolt = <1850000>;
> + regulator-max-microvolt = <1250000>;
> regulator-initial-mode = <2>;
> regulator-allowed-modes = <2>, <4>;
> regulator-ramp-delay = <3125>;
> @@ -326,8 +326,8 @@
>
> vldo1: LDO1 {
> regulator-name = "LDO1";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <3700000>;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> regulator-always-on;
>
> regulator-state-standby {
> @@ -707,7 +707,6 @@
> ck_cd_rstn_vddsel {
> pinmux = <PIN_PA0__SDMMC0_CK>,
> <PIN_PA2__SDMMC0_RSTN>,
> - <PIN_PA14__SDMMC0_CD>,
> <PIN_PA11__SDMMC0_DS>;
> slew-rate = <0>;
> bias-pull-up;
> diff --git a/arch/arm/dts/sama7g5.dtsi b/arch/arm/dts/sama7g5.dtsi
> index d38090d7dd..6388a60e53 100644
> --- a/arch/arm/dts/sama7g5.dtsi
> +++ b/arch/arm/dts/sama7g5.dtsi
> @@ -15,6 +15,7 @@
> #include <dt-bindings/clk/at91.h>
> #include <dt-bindings/dma/at91.h>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/mfd/at91-usart.h>
>
> / {
> model = "Microchip SAMA7G5 family SoC";
> @@ -195,11 +196,11 @@
> <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
> interrupt-controller;
> #interrupt-cells = <2>;
> gpio-controller;
> #gpio-cells = <2>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
> };
>
> pmc: pmc at e0018000 {
> @@ -211,6 +212,13 @@
> clock-names = "td_slck", "md_slck", "main_xtal", "main_rc";
> };
>
> + reset_controller: reset-controller at e001d000 {
> + compatible = "microchip,sama7g5-rstc";
> + reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>;
> + #reset-cells = <1>;
> + clocks = <&clk32k 0>;
> + };
> +
> shdwc: shdwc at e001d010 {
> compatible = "microchip,sama7g5-shdwc", "syscon";
> reg = <0xe001d010 0x10>;
> @@ -229,13 +237,6 @@
> clocks = <&clk32k 0>;
> };
>
> - reset_controller: rstc at e001d000 {
> - compatible = "microchip,sama7g5-rstc", "microchip,sam9x60-rstc";
> - reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>;
> - #reset-cells = <1>;
> - clocks = <&clk32k 0>;
> - };
> -
> clk32k: clock-controller at e001d050 {
> compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
> reg = <0xe001d050 0x4>;
> @@ -620,6 +621,7 @@
> uart0: serial at 200 {
> compatible = "atmel,at91sam9260-usart";
> reg = <0x200 0x200>;
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
> clock-names = "usart";
> @@ -668,6 +670,7 @@
> uart3: serial at 200 {
> compatible = "atmel,at91sam9260-usart";
> reg = <0x200 0x200>;
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
> clock-names = "usart";
> @@ -711,6 +714,7 @@
> uart4: serial at 200 {
> compatible = "atmel,at91sam9260-usart";
> reg = <0x200 0x200>;
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
> clock-names = "usart";
> @@ -736,6 +740,7 @@
> uart7: serial at 200 {
> compatible = "atmel,at91sam9260-usart";
> reg = <0x200 0x200>;
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
> clock-names = "usart";
> @@ -884,9 +889,9 @@
> #address-cells = <1>;
> #size-cells = <0>;
> atmel,fifo-size = <32>;
> - dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>,
> - <&dma0 AT91_XDMAC_DT_PERID(28)>;
> - dma-names = "rx", "tx";
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
> + <&dma0 AT91_XDMAC_DT_PERID(27)>;
> + dma-names = "tx", "rx";
> status = "disabled";
> };
> };
More information about the U-Boot
mailing list