[PATCH v2 0/2] Manage PCS/PMA PHY if pressent

[Michal Simek]

On 11/1/22 04:57, Andy Chiu wrote:
> If both PCS/PMA PHY and an external PHY are pressent on the Ethernet,
> then the real link status should point to the external facing PHY. At
> the same time, we must ensure the link status of the PCS/PMA PHY is good
> before transmitting packets.
> 
> Change Log:
> --- v2 ---
> 1. Fix typo: use pcs-handle instead of pcs-phy in DT
> 2. Move printing of status waiting of pcs phy to debug and refactor
>     code.
> 
> Andy Chiu (2):
>    net: xilinx_axi: add PCS/PMA PHY
>    net: xilinx_axi: check PCS/PMA PHY status in setup_phy
> 
>   drivers/net/xilinx_axi_emac.c | 70 ++++++++++++++++++++++++++++++++++-
>   1 file changed, 68 insertions(+), 2 deletions(-)
> 

Applied.
M