[PATCH 10/41] net: fm: Remove non-DM_ETH code
Tom Rini
trini at konsulko.com
Sun Nov 27 16:25:05 CET 2022
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini at konsulko.com>
---
drivers/net/fm/Makefile | 1 -
drivers/net/fm/eth.c | 238 -----------------------
drivers/net/fm/fm.c | 4 -
drivers/net/fm/fm.h | 8 -
drivers/net/fm/init.c | 386 -------------------------------------
drivers/net/fm/memac_phy.c | 52 -----
6 files changed, 689 deletions(-)
delete mode 100644 drivers/net/fm/init.c
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index 5a7d3037af40..b34209d2b3ee 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -6,7 +6,6 @@ obj-y += dtsec.o
obj-y += eth.o
obj-y += fdt.o
obj-y += fm.o
-obj-y += init.o
obj-y += tgec.o
obj-y += tgec_phy.o
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index c8381cc7133c..9fd26de0d721 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -8,12 +8,10 @@
#include <log.h>
#include <part.h>
#include <asm/io.h>
-#ifdef CONFIG_DM_ETH
#include <dm.h>
#include <dm/ofnode.h>
#include <linux/compat.h>
#include <phy_interface.h>
-#endif
#include <malloc.h>
#include <net.h>
#include <hwconfig.h>
@@ -28,11 +26,6 @@
#include "fm.h"
-#ifndef CONFIG_DM_ETH
-static struct eth_device *devlist[NUM_FM_PORTS];
-static int num_controllers;
-#endif
-
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
#define TBIANA_SETTINGS (TBIANA_ASYMMETRIC_PAUSE | TBIANA_SYMMETRIC_PAUSE | \
@@ -53,14 +46,10 @@ static void dtsec_configure_serdes(struct fm_eth *priv)
PHY_INTERFACE_MODE_2500BASEX) ? true : false;
int i = 0, j;
-#ifndef CONFIG_DM_ETH
- bus.priv = priv->mac->phyregs;
-#else
bus.priv = priv->pcs_mdio;
bus.read = memac_mdio_read;
bus.write = memac_mdio_write;
bus.reset = memac_mdio_reset;
-#endif
qsgmii_loop:
/* SGMII IF mode + AN enable only for 1G SGMII, not for 2.5G */
@@ -136,19 +125,6 @@ static void dtsec_init_phy(struct fm_eth *fm_eth)
fm_eth->enet_if == PHY_INTERFACE_MODE_2500BASEX)
dtsec_configure_serdes(fm_eth);
}
-
-#ifndef CONFIG_DM_ETH
-#ifdef CONFIG_PHYLIB
-static int tgec_is_fibre(struct fm_eth *fm)
-{
- char phyopt[20];
-
- sprintf(phyopt, "fsl_fm%d_xaui_phy", fm->fm_index + 1);
-
- return hwconfig_arg_cmp(phyopt, "xfi");
-}
-#endif
-#endif /* CONFIG_DM_ETH */
#endif
static u16 muram_readw(u16 *addr)
@@ -465,18 +441,10 @@ static void fmc_tx_port_graceful_stop_disable(struct fm_eth *fm_eth)
sync();
}
-#ifndef CONFIG_DM_ETH
-static int fm_eth_open(struct eth_device *dev, struct bd_info *bd)
-#else
static int fm_eth_open(struct udevice *dev)
-#endif
{
-#ifndef CONFIG_DM_ETH
- struct fm_eth *fm_eth = dev->priv;
-#else
struct eth_pdata *pdata = dev_get_plat(dev);
struct fm_eth *fm_eth = dev_get_priv(dev);
-#endif
unsigned char *enetaddr;
struct fsl_enet_mac *mac;
#ifdef CONFIG_PHYLIB
@@ -485,11 +453,7 @@ static int fm_eth_open(struct udevice *dev)
mac = fm_eth->mac;
-#ifndef CONFIG_DM_ETH
- enetaddr = &dev->enetaddr[0];
-#else
enetaddr = pdata->enetaddr;
-#endif
/* setup the MAC address */
if (enetaddr[0] & 0x01) {
@@ -512,12 +476,7 @@ static int fm_eth_open(struct udevice *dev)
if (fm_eth->phydev) {
ret = phy_startup(fm_eth->phydev);
if (ret) {
-#ifndef CONFIG_DM_ETH
- printf("%s: Could not initialize\n",
- fm_eth->phydev->dev->name);
-#else
printf("%s: Could not initialize\n", dev->name);
-#endif
return ret;
}
} else {
@@ -540,20 +499,12 @@ static int fm_eth_open(struct udevice *dev)
return fm_eth->phydev->link ? 0 : -1;
}
-#ifndef CONFIG_DM_ETH
-static void fm_eth_halt(struct eth_device *dev)
-#else
static void fm_eth_halt(struct udevice *dev)
-#endif
{
struct fm_eth *fm_eth;
struct fsl_enet_mac *mac;
-#ifndef CONFIG_DM_ETH
- fm_eth = (struct fm_eth *)dev->priv;
-#else
fm_eth = dev_get_priv(dev);
-#endif
mac = fm_eth->mac;
/* graceful stop the transmission of frames */
@@ -571,11 +522,7 @@ static void fm_eth_halt(struct udevice *dev)
#endif
}
-#ifndef CONFIG_DM_ETH
-static int fm_eth_send(struct eth_device *dev, void *buf, int len)
-#else
static int fm_eth_send(struct udevice *dev, void *buf, int len)
-#endif
{
struct fm_eth *fm_eth;
struct fm_port_global_pram *pram;
@@ -583,11 +530,7 @@ static int fm_eth_send(struct udevice *dev, void *buf, int len)
u16 offset_in;
int i;
-#ifndef CONFIG_DM_ETH
- fm_eth = (struct fm_eth *)dev->priv;
-#else
fm_eth = dev_get_priv(dev);
-#endif
pram = fm_eth->tx_pram;
txbd = fm_eth->cur_txbd;
@@ -668,11 +611,7 @@ static struct fm_port_bd *fm_eth_free_one(struct fm_eth *fm_eth,
return rxbd;
}
-#ifndef CONFIG_DM_ETH
-static int fm_eth_recv(struct eth_device *dev)
-#else
static int fm_eth_recv(struct udevice *dev, int flags, uchar **packetp)
-#endif
{
struct fm_eth *fm_eth;
struct fm_port_bd *rxbd;
@@ -681,11 +620,7 @@ static int fm_eth_recv(struct udevice *dev, int flags, uchar **packetp)
int ret = -1;
u8 *data;
-#ifndef CONFIG_DM_ETH
- fm_eth = (struct fm_eth *)dev->priv;
-#else
fm_eth = dev_get_priv(dev);
-#endif
rxbd = fm_eth->cur_rxbd;
status = muram_readw(&rxbd->status);
@@ -695,12 +630,8 @@ static int fm_eth_recv(struct udevice *dev, int flags, uchar **packetp)
buf_lo = in_be32(&rxbd->buf_ptr_lo);
data = (u8 *)((ulong)(buf_hi << 16) << 16 | buf_lo);
len = muram_readw(&rxbd->len);
-#ifndef CONFIG_DM_ETH
- net_process_received_packet(data, len);
-#else
*packetp = data;
return len;
-#endif
} else {
printf("%s: Rx error\n", dev->name);
ret = 0;
@@ -717,7 +648,6 @@ static int fm_eth_recv(struct udevice *dev, int flags, uchar **packetp)
return ret;
}
-#ifdef CONFIG_DM_ETH
static int fm_eth_free_pkt(struct udevice *dev, uchar *packet, int length)
{
struct fm_eth *fm_eth = (struct fm_eth *)dev_get_priv(dev);
@@ -726,65 +656,7 @@ static int fm_eth_free_pkt(struct udevice *dev, uchar *packet, int length)
return 0;
}
-#endif /* CONFIG_DM_ETH */
-
-#ifndef CONFIG_DM_ETH
-static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
-{
- struct fsl_enet_mac *mac;
- int num;
- void *base, *phyregs = NULL;
-
- num = fm_eth->num;
-
-#ifdef CONFIG_SYS_FMAN_V3
-#ifndef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
- if (fm_eth->type == FM_ETH_10G_E) {
- /* 10GEC1/10GEC2 use mEMAC9/mEMAC10 on T2080/T4240.
- * 10GEC3/10GEC4 use mEMAC1/mEMAC2 on T2080.
- * 10GEC1 uses mEMAC1 on T1024.
- * so it needs to change the num.
- */
- if (fm_eth->num >= 2)
- num -= 2;
- else
- num += 8;
- }
-#endif
- base = ®->memac[num].fm_memac;
- phyregs = ®->memac[num].fm_memac_mdio;
-#else
- /* Get the mac registers base address */
- if (fm_eth->type == FM_ETH_1G_E) {
- base = ®->mac_1g[num].fm_dtesc;
- phyregs = ®->mac_1g[num].fm_mdio.miimcfg;
- } else {
- base = ®->mac_10g[num].fm_10gec;
- phyregs = ®->mac_10g[num].fm_10gec_mdio;
- }
-#endif
-
- /* alloc mac controller */
- mac = malloc(sizeof(struct fsl_enet_mac));
- if (!mac)
- return -ENOMEM;
- memset(mac, 0, sizeof(struct fsl_enet_mac));
-
- /* save the mac to fm_eth struct */
- fm_eth->mac = mac;
-
-#ifdef CONFIG_SYS_FMAN_V3
- init_memac(mac, base, phyregs, MAX_RXBUF_LEN);
-#else
- if (fm_eth->type == FM_ETH_1G_E)
- init_dtsec(mac, base, phyregs, MAX_RXBUF_LEN);
- else
- init_tgec(mac, base, phyregs, MAX_RXBUF_LEN);
-#endif
- return 0;
-}
-#else /* CONFIG_DM_ETH */
static int fm_eth_init_mac(struct fm_eth *fm_eth, void *reg)
{
#ifndef CONFIG_SYS_FMAN_V3
@@ -817,15 +689,11 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, void *reg)
return 0;
}
-#endif /* CONFIG_DM_ETH */
static int init_phy(struct fm_eth *fm_eth)
{
#ifdef CONFIG_PHYLIB
u32 supported = PHY_GBIT_FEATURES;
-#ifndef CONFIG_DM_ETH
- struct phy_device *phydev = NULL;
-#endif
if (fm_eth->type == FM_ETH_10G_E)
supported = PHY_10G_FEATURES;
@@ -836,7 +704,6 @@ static int init_phy(struct fm_eth *fm_eth)
if (fm_eth->type == FM_ETH_1G_E)
dtsec_init_phy(fm_eth);
-#ifdef CONFIG_DM_ETH
#ifdef CONFIG_PHYLIB
#ifdef CONFIG_DM_MDIO
fm_eth->phydev = dm_eth_phy_connect(fm_eth->dev);
@@ -848,112 +715,8 @@ static int init_phy(struct fm_eth *fm_eth)
phy_config(fm_eth->phydev);
#endif
-#else /* CONFIG_DM_ETH */
-#ifdef CONFIG_PHYLIB
- if (fm_eth->bus) {
- phydev = phy_connect(fm_eth->bus, fm_eth->phyaddr, fm_eth->dev,
- fm_eth->enet_if);
- if (!phydev) {
- printf("Failed to connect\n");
- return -1;
- }
- } else {
- return 0;
- }
-
- if (fm_eth->type == FM_ETH_1G_E) {
- supported = (SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_1000baseT_Full);
- } else {
- supported = SUPPORTED_10000baseT_Full;
-
- if (tgec_is_fibre(fm_eth))
- phydev->port = PORT_FIBRE;
- }
-
- phydev->supported &= supported;
- phydev->advertising = phydev->supported;
-
- fm_eth->phydev = phydev;
-
- phy_config(phydev);
-#endif
-#endif /* CONFIG_DM_ETH */
- return 0;
-}
-
-#ifndef CONFIG_DM_ETH
-int fm_eth_initialize(struct ccsr_fman *reg, struct fm_eth_info *info)
-{
- struct eth_device *dev;
- struct fm_eth *fm_eth;
- int i, num = info->num;
- int ret;
-
- /* alloc eth device */
- dev = (struct eth_device *)malloc(sizeof(struct eth_device));
- if (!dev)
- return -ENOMEM;
- memset(dev, 0, sizeof(struct eth_device));
-
- /* alloc the FMan ethernet private struct */
- fm_eth = (struct fm_eth *)malloc(sizeof(struct fm_eth));
- if (!fm_eth)
- return -ENOMEM;
- memset(fm_eth, 0, sizeof(struct fm_eth));
-
- /* save off some things we need from the info struct */
- fm_eth->fm_index = info->index - 1; /* keep as 0 based for muram */
- fm_eth->num = num;
- fm_eth->type = info->type;
-
- fm_eth->rx_port = (void *)®->port[info->rx_port_id - 1].fm_bmi;
- fm_eth->tx_port = (void *)®->port[info->tx_port_id - 1].fm_bmi;
-
- /* set the ethernet max receive length */
- fm_eth->max_rx_len = MAX_RXBUF_LEN;
-
- /* init global mac structure */
- ret = fm_eth_init_mac(fm_eth, reg);
- if (ret)
- return ret;
-
- /* keep same as the manual, we call FMAN1, FMAN2, DTSEC1, DTSEC2, etc */
- if (fm_eth->type == FM_ETH_1G_E)
- sprintf(dev->name, "FM%d at DTSEC%d", info->index, num + 1);
- else
- sprintf(dev->name, "FM%d at TGEC%d", info->index, num + 1);
-
- devlist[num_controllers++] = dev;
- dev->iobase = 0;
- dev->priv = (void *)fm_eth;
- dev->init = fm_eth_open;
- dev->halt = fm_eth_halt;
- dev->send = fm_eth_send;
- dev->recv = fm_eth_recv;
- fm_eth->dev = dev;
- fm_eth->bus = info->bus;
- fm_eth->phyaddr = info->phy_addr;
- fm_eth->enet_if = info->enet_if;
-
- /* startup the FM im */
- ret = fm_eth_startup(fm_eth);
- if (ret)
- return ret;
-
- init_phy(fm_eth);
-
- /* clear the ethernet address */
- for (i = 0; i < 6; i++)
- dev->enetaddr[i] = 0;
- eth_register(dev);
-
return 0;
}
-#else /* CONFIG_DM_ETH */
static int fm_eth_bind(struct udevice *dev)
{
@@ -1139,4 +902,3 @@ U_BOOT_DRIVER(eth_fman) = {
.plat_auto = sizeof(struct eth_pdata),
.flags = DM_FLAG_ALLOC_PRIV_DMA,
};
-#endif /* CONFIG_DM_ETH */
diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
index c476cb31200a..055dd61fbe5a 100644
--- a/drivers/net/fm/fm.c
+++ b/drivers/net/fm/fm.c
@@ -10,9 +10,7 @@
#include <asm/io.h>
#include <linux/errno.h>
#include <u-boot/crc.h>
-#ifdef CONFIG_DM_ETH
#include <dm.h>
-#endif
#include "fm.h"
#include <fsl_qe.h> /* For struct qe_firmware */
@@ -551,7 +549,6 @@ int fm_init_common(int index, struct ccsr_fman *reg)
}
#endif
-#ifdef CONFIG_DM_ETH
struct fman_priv {
struct ccsr_fman *reg;
unsigned int fman_id;
@@ -626,4 +623,3 @@ U_BOOT_DRIVER(fman) = {
.priv_auto = sizeof(struct fman_priv),
.flags = DM_FLAG_ALLOC_PRIV_DMA,
};
-#endif /* CONFIG_DM_ETH */
diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h
index 3d9cc5ca069d..ba858cc24b06 100644
--- a/drivers/net/fm/fm.h
+++ b/drivers/net/fm/fm.h
@@ -57,7 +57,6 @@ struct fm_port_bd {
#define TxBD_READY 0x8000
#define TxBD_LAST BD_LAST
-#ifdef CONFIG_DM_ETH
enum fm_mac_type {
#ifdef CONFIG_SYS_FMAN_V3
FM_MEMAC,
@@ -66,7 +65,6 @@ enum fm_mac_type {
FM_TGEC,
#endif
};
-#endif
/* Fman ethernet private struct */
/* Rx/Tx queue descriptor */
@@ -115,9 +113,7 @@ void fman_disable_port(enum fm_port port);
void fman_enable_port(enum fm_port port);
int fman_id(struct udevice *dev);
void *fman_port(struct udevice *dev, int num);
-#ifdef CONFIG_DM_ETH
void *fman_mdio(struct udevice *dev, enum fm_mac_type type, int num);
-#endif
struct fsl_enet_mac {
void *base; /* MAC controller registers base address */
@@ -143,13 +139,9 @@ struct fm_eth {
struct mii_dev *bus;
struct phy_device *phydev;
int phyaddr;
-#ifndef CONFIG_DM_ETH
- struct eth_device *dev;
-#else
enum fm_mac_type mac_type;
struct udevice *dev;
struct udevice *pcs_mdio;
-#endif
int max_rx_len;
struct fm_port_global_pram *rx_pram; /* Rx parameter table */
struct fm_port_global_pram *tx_pram; /* Tx parameter table */
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
deleted file mode 100644
index 618c1bccbe3f..000000000000
--- a/drivers/net/fm/init.c
+++ /dev/null
@@ -1,386 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2011-2015 Freescale Semiconductor, Inc.
- */
-#include <errno.h>
-#include <common.h>
-#include <net.h>
-#include <asm/io.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#ifdef CONFIG_FSL_LAYERSCAPE
-#include <asm/arch/fsl_serdes.h>
-#include <linux/libfdt.h>
-#else
-#include <asm/fsl_serdes.h>
-#endif
-
-#include "fm.h"
-
-#ifndef CONFIG_DM_ETH
-struct fm_eth_info fm_info[] = {
-#if (CFG_SYS_NUM_FM1_DTSEC >= 1)
- FM_DTSEC_INFO_INITIALIZER(1, 1),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 2)
- FM_DTSEC_INFO_INITIALIZER(1, 2),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 3)
- FM_DTSEC_INFO_INITIALIZER(1, 3),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 4)
- FM_DTSEC_INFO_INITIALIZER(1, 4),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 5)
- FM_DTSEC_INFO_INITIALIZER(1, 5),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 6)
- FM_DTSEC_INFO_INITIALIZER(1, 6),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 7)
- FM_DTSEC_INFO_INITIALIZER(1, 9),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 8)
- FM_DTSEC_INFO_INITIALIZER(1, 10),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 1)
- FM_DTSEC_INFO_INITIALIZER(2, 1),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 2)
- FM_DTSEC_INFO_INITIALIZER(2, 2),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 3)
- FM_DTSEC_INFO_INITIALIZER(2, 3),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 4)
- FM_DTSEC_INFO_INITIALIZER(2, 4),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 5)
- FM_DTSEC_INFO_INITIALIZER(2, 5),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 6)
- FM_DTSEC_INFO_INITIALIZER(2, 6),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 7)
- FM_DTSEC_INFO_INITIALIZER(2, 9),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 8)
- FM_DTSEC_INFO_INITIALIZER(2, 10),
-#endif
-#if (CFG_SYS_NUM_FM1_10GEC >= 1)
- FM_TGEC_INFO_INITIALIZER(1, 1),
-#endif
-#if (CFG_SYS_NUM_FM1_10GEC >= 2)
- FM_TGEC_INFO_INITIALIZER(1, 2),
-#endif
-#if (CFG_SYS_NUM_FM1_10GEC >= 3)
- FM_TGEC_INFO_INITIALIZER2(1, 3),
-#endif
-#if (CFG_SYS_NUM_FM1_10GEC >= 4)
- FM_TGEC_INFO_INITIALIZER2(1, 4),
-#endif
-#if (CFG_SYS_NUM_FM2_10GEC >= 1)
- FM_TGEC_INFO_INITIALIZER(2, 1),
-#endif
-#if (CFG_SYS_NUM_FM2_10GEC >= 2)
- FM_TGEC_INFO_INITIALIZER(2, 2),
-#endif
-};
-
-int fm_standard_init(struct bd_info *bis)
-{
- int i;
- struct ccsr_fman *reg;
-
- reg = (void *)CFG_SYS_FSL_FM1_ADDR;
- if (fm_init_common(0, reg))
- return 0;
-
- for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
- if ((fm_info[i].enabled) && (fm_info[i].index == 1))
- fm_eth_initialize(reg, &fm_info[i]);
- }
-
-#if (CFG_SYS_NUM_FMAN == 2)
- reg = (void *)CFG_SYS_FSL_FM2_ADDR;
- if (fm_init_common(1, reg))
- return 0;
-
- for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
- if ((fm_info[i].enabled) && (fm_info[i].index == 2))
- fm_eth_initialize(reg, &fm_info[i]);
- }
-#endif
-
- return 1;
-}
-
-/* simple linear search to map from port to array index */
-static int fm_port_to_index(enum fm_port port)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
- if (fm_info[i].port == port)
- return i;
- }
-
- return -1;
-}
-
-/*
- * Determine if an interface is actually active based on HW config
- * we expect fman_port_enet_if() to report PHY_INTERFACE_MODE_NA if
- * the interface is not active based on HW cfg of the SoC
- */
-void fman_enet_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
- phy_interface_t enet_if;
-
- enet_if = fman_port_enet_if(fm_info[i].port);
- if (enet_if != PHY_INTERFACE_MODE_NA) {
- fm_info[i].enabled = 1;
- fm_info[i].enet_if = enet_if;
- } else {
- fm_info[i].enabled = 0;
- }
- }
-
- return;
-}
-
-void fm_disable_port(enum fm_port port)
-{
- int i = fm_port_to_index(port);
-
- if (i == -1)
- return;
-
- fm_info[i].enabled = 0;
-#ifndef CONFIG_SYS_FMAN_V3
- fman_disable_port(port);
-#endif
-}
-
-void fm_enable_port(enum fm_port port)
-{
- int i = fm_port_to_index(port);
-
- if (i == -1)
- return;
-
- fm_info[i].enabled = 1;
- fman_enable_port(port);
-}
-
-void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus)
-{
- int i = fm_port_to_index(port);
-
- if (i == -1)
- return;
-
- fm_info[i].bus = bus;
-}
-
-void fm_info_set_phy_address(enum fm_port port, int address)
-{
- int i = fm_port_to_index(port);
-
- if (i == -1)
- return;
-
- fm_info[i].phy_addr = address;
-}
-
-/*
- * Returns the PHY address for a given Fman port
- *
- * The port must be set via a prior call to fm_info_set_phy_address().
- * A negative error code is returned if the port is invalid.
- */
-int fm_info_get_phy_address(enum fm_port port)
-{
- int i = fm_port_to_index(port);
-
- if (i == -1)
- return -1;
-
- return fm_info[i].phy_addr;
-}
-
-/*
- * Returns the type of the data interface between the given MAC and its PHY.
- * This is typically determined by the RCW.
- */
-phy_interface_t fm_info_get_enet_if(enum fm_port port)
-{
- int i = fm_port_to_index(port);
-
- if (i == -1)
- return PHY_INTERFACE_MODE_NA;
-
- if (fm_info[i].enabled)
- return fm_info[i].enet_if;
-
- return PHY_INTERFACE_MODE_NA;
-}
-
-static void
-__def_board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
- enum fm_port port, int offset)
-{
- return;
-}
-
-void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
- enum fm_port port, int offset)
- __attribute__((weak, alias("__def_board_ft_fman_fixup_port")));
-
-int ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
-{
- int off;
- uint32_t ph;
- phys_addr_t paddr = CFG_SYS_CCSRBAR_PHYS + info->compat_offset;
-#ifndef CONFIG_SYS_FMAN_V3
- u64 dtsec1_addr = (u64)CFG_SYS_CCSRBAR_PHYS +
- CFG_SYS_FSL_FM1_DTSEC1_OFFSET;
-#endif
-
- off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
- if (off == -FDT_ERR_NOTFOUND)
- return -EINVAL;
-
- if (info->enabled) {
- fdt_fixup_phy_connection(blob, off, info->enet_if);
- board_ft_fman_fixup_port(blob, prop, paddr, info->port, off);
- return 0;
- }
-
-#ifdef CONFIG_SYS_FMAN_V3
-#ifndef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
- /*
- * On T2/T4 SoCs, physically FM1_DTSEC9 and FM1_10GEC1 use the same
- * dual-role MAC, when FM1_10GEC1 is enabled and FM1_DTSEC9
- * is disabled, ensure that the dual-role MAC is not disabled,
- * ditto for other dual-role MACs.
- */
- if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) ||
- ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
- ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3))) ||
- ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4))) ||
- ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) ||
- ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) ||
- ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1))) ||
- ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC2)))
-#if (CFG_SYS_NUM_FMAN == 2)
- ||
- ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1))) ||
- ((info->port == FM2_DTSEC10) && (PORT_IS_ENABLED(FM2_10GEC2))) ||
- ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9))) ||
- ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10)))
-#endif
-#else
- /* FM1_DTSECx and FM1_10GECx use the same dual-role MAC */
- if (((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC1))) ||
- ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
- ((info->port == FM1_DTSEC3) && (PORT_IS_ENABLED(FM1_10GEC3))) ||
- ((info->port == FM1_DTSEC4) && (PORT_IS_ENABLED(FM1_10GEC4))) ||
- ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC1))) ||
- ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC2))) ||
- ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC3))) ||
- ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC4)))
-#endif
- )
- return 0;
-#endif
- /* board code might have caused offset to change */
- off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
-
-#ifndef CONFIG_SYS_FMAN_V3
- /* Don't disable FM1-DTSEC1 MAC as its used for MDIO */
- if (paddr != dtsec1_addr)
-#endif
- fdt_status_disabled(blob, off); /* disable the MAC node */
-
- /* disable the fsl,dpa-ethernet node that points to the MAC */
- ph = fdt_get_phandle(blob, off);
- do_fixup_by_prop(blob, "fsl,fman-mac", &ph, sizeof(ph),
- "status", "disabled", strlen("disabled") + 1, 1);
-
- return 0;
-}
-
-void fdt_fixup_fman_ethernet(void *blob)
-{
- int i;
-
-#ifdef CONFIG_SYS_FMAN_V3
- for (i = 0; i < ARRAY_SIZE(fm_info); i++)
- ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac");
-#else
- for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
- /* Try the new compatible first.
- * If the node is missing, try the old.
- */
- if (fm_info[i].type == FM_ETH_1G_E) {
- if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-dtsec"))
- ft_fixup_port(blob, &fm_info[i],
- "fsl,fman-1g-mac");
- } else {
- if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-xgec") &&
- ft_fixup_port(blob, &fm_info[i], "fsl,fman-tgec"))
- ft_fixup_port(blob, &fm_info[i],
- "fsl,fman-10g-mac");
- }
- }
-#endif
-}
-
-/*QSGMII Riser Card can work in SGMII mode, but the PHY address is different.
- *This function scans which Riser Card being used(QSGMII or SGMII Riser Card),
- *then set the correct PHY address
- */
-void set_sgmii_phy(struct mii_dev *bus, enum fm_port base_port,
- unsigned int port_num, int phy_base_addr)
-{
- unsigned int regnum = 0;
- int qsgmii;
- int i;
- int phy_real_addr;
-
- qsgmii = is_qsgmii_riser_card(bus, phy_base_addr, port_num, regnum);
-
- if (!qsgmii)
- return;
-
- for (i = base_port; i < base_port + port_num; i++) {
- if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_SGMII) {
- phy_real_addr = phy_base_addr + i - base_port;
- fm_info_set_phy_address(i, phy_real_addr);
- }
- }
-}
-
-/*to check whether qsgmii riser card is used*/
-int is_qsgmii_riser_card(struct mii_dev *bus, int phy_base_addr,
- unsigned int port_num, unsigned regnum)
-{
- int i;
- int val;
-
- if (!bus)
- return 0;
-
- for (i = phy_base_addr; i < phy_base_addr + port_num; i++) {
- val = bus->read(bus, i, MDIO_DEVAD_NONE, regnum);
- if (val != MIIM_TIMEOUT)
- return 1;
- }
-
- return 0;
-}
-#endif /* CONFIG_DM_ETH */
diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c
index 3ddae97e0979..e0b62b944909 100644
--- a/drivers/net/fm/memac_phy.c
+++ b/drivers/net/fm/memac_phy.c
@@ -22,11 +22,9 @@
#define memac_setbits_32(a, v) setbits_be32(a, v)
#endif
-#ifdef CONFIG_DM_ETH
struct fm_mdio_priv {
struct memac_mdio_controller *regs;
};
-#endif
#define MAX_NUM_RETRIES 1000
@@ -88,9 +86,6 @@ int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
u32 c45 = 1; /* Default to 10G interface */
int err;
-#ifndef CONFIG_DM_ETH
- regs = bus->priv;
-#else
struct fm_mdio_priv *priv;
if (!bus->priv)
@@ -99,7 +94,6 @@ int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
regs = priv->regs;
debug("memac_mdio_write(regs %p, port %d, dev %d, reg %d, val %#x)\n",
regs, port_addr, dev_addr, regnum, value);
-#endif
if (dev_addr == MDIO_DEVAD_NONE) {
c45 = 0; /* clause 22 */
@@ -147,22 +141,14 @@ int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
u32 c45 = 1;
int err;
-#ifndef CONFIG_DM_ETH
- regs = bus->priv;
-#else
struct fm_mdio_priv *priv;
if (!bus->priv)
return -EINVAL;
priv = dev_get_priv(bus->priv);
regs = priv->regs;
-#endif
if (dev_addr == MDIO_DEVAD_NONE) {
-#ifndef CONFIG_DM_ETH
- if (!strcmp(bus->name, DEFAULT_FM_TGEC_MDIO_NAME))
- return 0xffff;
-#endif
c45 = 0; /* clause 22 */
dev_addr = regnum & 0x1f;
memac_clrbits_32(®s->mdio_stat, MDIO_STAT_ENC);
@@ -205,43 +191,6 @@ int memac_mdio_reset(struct mii_dev *bus)
return 0;
}
-#ifndef CONFIG_DM_ETH
-int fm_memac_mdio_init(struct bd_info *bis, struct memac_mdio_info *info)
-{
- struct mii_dev *bus = mdio_alloc();
-
- if (!bus) {
- printf("Failed to allocate FM TGEC MDIO bus\n");
- return -1;
- }
-
- bus->read = memac_mdio_read;
- bus->write = memac_mdio_write;
- bus->reset = memac_mdio_reset;
- strcpy(bus->name, info->name);
-
- bus->priv = info->regs;
-
- /*
- * On some platforms like B4860, default value of MDIO_CLK_DIV bits
- * in mdio_stat(mdio_cfg) register generates MDIO clock too high
- * (much higher than 2.5MHz), violating the IEEE specs.
- * On other platforms like T1040, default value of MDIO_CLK_DIV bits
- * is zero, so MDIO clock is disabled.
- * So, for proper functioning of MDIO, MDIO_CLK_DIV bits needs to
- * be properly initialized.
- * NEG bit default should be '1' as per FMAN-v3 RM, but on platform
- * like T2080QDS, this bit default is '0', which leads to MDIO failure
- * on XAUI PHY, so set this bit definitely.
- */
- memac_setbits_32(
- &((struct memac_mdio_controller *)info->regs)->mdio_stat,
- MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG);
-
- return mdio_register(bus);
-}
-
-#else /* CONFIG_DM_ETH */
#if defined(CONFIG_PHYLIB) && defined(CONFIG_DM_MDIO)
static int fm_mdio_read(struct udevice *dev, int addr, int devad, int reg)
{
@@ -341,4 +290,3 @@ U_BOOT_DRIVER(fman_mdio) = {
.plat_auto = sizeof(struct mdio_perdev_priv),
};
#endif /* CONFIG_PHYLIB && CONFIG_DM_MDIO */
-#endif /* CONFIG_DM_ETH */
--
2.25.1
More information about the U-Boot
mailing list