[PATCH 27/41] net: rtl8169: Remove non-DM_ETH code
Tom Rini
trini at konsulko.com
Sun Nov 27 16:25:22 CET 2022
As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.
Signed-off-by: Tom Rini <trini at konsulko.com>
---
drivers/net/rtl8169.c | 166 ------------------------------------------
1 file changed, 166 deletions(-)
diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index da2cfb7f550f..c9c07a5a8ffe 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -47,9 +47,6 @@
#include <malloc.h>
#include <memalign.h>
#include <net.h>
-#ifndef CONFIG_DM_ETH
-#include <netdev.h>
-#endif
#include <asm/cache.h>
#include <asm/io.h>
#include <pci.h>
@@ -514,13 +511,8 @@ static void rtl_flush_buffer(void *buf, size_t size)
/**************************************************************************
RECV - Receive a frame
***************************************************************************/
-#ifdef CONFIG_DM_ETH
static int rtl_recv_common(struct udevice *dev, unsigned long dev_iobase,
uchar **packetp)
-#else
-static int rtl_recv_common(pci_dev_t dev, unsigned long dev_iobase,
- uchar **packetp)
-#endif
{
/* return true if there's an ethernet packet ready to read */
/* nic->packet should contain data on return */
@@ -551,22 +543,12 @@ static int rtl_recv_common(pci_dev_t dev, unsigned long dev_iobase,
else
tpc->RxDescArray[cur_rx].status =
cpu_to_le32(OWNbit + RX_BUF_SIZE);
-#ifdef CONFIG_DM_ETH
tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32(
dm_pci_mem_to_phys(dev,
(pci_addr_t)(unsigned long)
tpc->RxBufferRing[cur_rx]));
-#else
- tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32(
- pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)
- tpc->RxBufferRing[cur_rx]));
-#endif
rtl_flush_rx_desc(&tpc->RxDescArray[cur_rx]);
-#ifdef CONFIG_DM_ETH
*packetp = rxdata;
-#else
- net_process_received_packet(rxdata, length);
-#endif
} else {
puts("Error Rx");
length = -EIO;
@@ -584,32 +566,19 @@ static int rtl_recv_common(pci_dev_t dev, unsigned long dev_iobase,
return (0); /* initially as this is called to flush the input */
}
-#ifdef CONFIG_DM_ETH
int rtl8169_eth_recv(struct udevice *dev, int flags, uchar **packetp)
{
struct rtl8169_private *priv = dev_get_priv(dev);
return rtl_recv_common(dev, priv->iobase, packetp);
}
-#else
-static int rtl_recv(struct eth_device *dev)
-{
- return rtl_recv_common((pci_dev_t)(unsigned long)dev->priv,
- dev->iobase, NULL);
-}
-#endif /* nCONFIG_DM_ETH */
#define HZ 1000
/**************************************************************************
SEND - Transmit a frame
***************************************************************************/
-#ifdef CONFIG_DM_ETH
static int rtl_send_common(struct udevice *dev, unsigned long dev_iobase,
void *packet, int length)
-#else
-static int rtl_send_common(pci_dev_t dev, unsigned long dev_iobase,
- void *packet, int length)
-#endif
{
/* send the packet to destination */
@@ -637,13 +606,8 @@ static int rtl_send_common(pci_dev_t dev, unsigned long dev_iobase,
rtl_flush_buffer(ptxb, ALIGN(len, RTL8169_ALIGN));
tpc->TxDescArray[entry].buf_Haddr = 0;
-#ifdef CONFIG_DM_ETH
tpc->TxDescArray[entry].buf_addr = cpu_to_le32(
dm_pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)ptxb));
-#else
- tpc->TxDescArray[entry].buf_addr = cpu_to_le32(
- pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)ptxb));
-#endif
if (entry != (NUM_TX_DESC - 1)) {
tpc->TxDescArray[entry].status =
cpu_to_le32((OWNbit | FSbit | LSbit) |
@@ -680,7 +644,6 @@ static int rtl_send_common(pci_dev_t dev, unsigned long dev_iobase,
return ret;
}
-#ifdef CONFIG_DM_ETH
int rtl8169_eth_send(struct udevice *dev, void *packet, int length)
{
struct rtl8169_private *priv = dev_get_priv(dev);
@@ -688,14 +651,6 @@ int rtl8169_eth_send(struct udevice *dev, void *packet, int length)
return rtl_send_common(dev, priv->iobase, packet, length);
}
-#else
-static int rtl_send(struct eth_device *dev, void *packet, int length)
-{
- return rtl_send_common((pci_dev_t)(unsigned long)dev->priv,
- dev->iobase, packet, length);
-}
-#endif
-
static void rtl8169_set_rx_mode(void)
{
u32 mc_filter[2]; /* Multicast hash filter */
@@ -719,11 +674,7 @@ static void rtl8169_set_rx_mode(void)
RTL_W32(MAR0 + 4, mc_filter[1]);
}
-#ifdef CONFIG_DM_ETH
static void rtl8169_hw_start(struct udevice *dev)
-#else
-static void rtl8169_hw_start(pci_dev_t dev)
-#endif
{
u32 i;
@@ -768,21 +719,11 @@ static void rtl8169_hw_start(pci_dev_t dev)
tpc->cur_rx = 0;
-#ifdef CONFIG_DM_ETH
RTL_W32(TxDescStartAddrLow, dm_pci_mem_to_phys(dev,
(pci_addr_t)(unsigned long)tpc->TxDescArray));
-#else
- RTL_W32(TxDescStartAddrLow, pci_mem_to_phys(dev,
- (pci_addr_t)(unsigned long)tpc->TxDescArray));
-#endif
RTL_W32(TxDescStartAddrHigh, (unsigned long)0);
-#ifdef CONFIG_DM_ETH
RTL_W32(RxDescStartAddrLow, dm_pci_mem_to_phys(
dev, (pci_addr_t)(unsigned long)tpc->RxDescArray));
-#else
- RTL_W32(RxDescStartAddrLow, pci_mem_to_phys(
- dev, (pci_addr_t)(unsigned long)tpc->RxDescArray));
-#endif
RTL_W32(RxDescStartAddrHigh, (unsigned long)0);
/* RTL-8169sc/8110sc or later version */
@@ -804,11 +745,7 @@ static void rtl8169_hw_start(pci_dev_t dev)
#endif
}
-#ifdef CONFIG_DM_ETH
static void rtl8169_init_ring(struct udevice *dev)
-#else
-static void rtl8169_init_ring(pci_dev_t dev)
-#endif
{
int i;
@@ -836,13 +773,8 @@ static void rtl8169_init_ring(pci_dev_t dev)
cpu_to_le32(OWNbit + RX_BUF_SIZE);
tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
-#ifdef CONFIG_DM_ETH
tpc->RxDescArray[i].buf_addr = cpu_to_le32(dm_pci_mem_to_phys(
dev, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i]));
-#else
- tpc->RxDescArray[i].buf_addr = cpu_to_le32(pci_mem_to_phys(
- dev, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i]));
-#endif
rtl_flush_rx_desc(&tpc->RxDescArray[i]);
}
@@ -851,13 +783,8 @@ static void rtl8169_init_ring(pci_dev_t dev)
#endif
}
-#ifdef CONFIG_DM_ETH
static void rtl8169_common_start(struct udevice *dev, unsigned char *enetaddr,
unsigned long dev_iobase)
-#else
-static void rtl8169_common_start(pci_dev_t dev, unsigned char *enetaddr,
- unsigned long dev_iobase)
-#endif
{
int i;
@@ -887,7 +814,6 @@ static void rtl8169_common_start(pci_dev_t dev, unsigned char *enetaddr,
#endif
}
-#ifdef CONFIG_DM_ETH
static int rtl8169_eth_start(struct udevice *dev)
{
struct eth_pdata *plat = dev_get_plat(dev);
@@ -897,18 +823,6 @@ static int rtl8169_eth_start(struct udevice *dev)
return 0;
}
-#else
-/**************************************************************************
-RESET - Finish setting up the ethernet interface
-***************************************************************************/
-static int rtl_reset(struct eth_device *dev, struct bd_info *bis)
-{
- rtl8169_common_start((pci_dev_t)(unsigned long)dev->priv,
- dev->enetaddr, dev->iobase);
-
- return 0;
-}
-#endif /* nCONFIG_DM_ETH */
static void rtl_halt_common(unsigned long dev_iobase)
{
@@ -933,24 +847,13 @@ static void rtl_halt_common(unsigned long dev_iobase)
}
}
-#ifdef CONFIG_DM_ETH
void rtl8169_eth_stop(struct udevice *dev)
{
struct rtl8169_private *priv = dev_get_priv(dev);
rtl_halt_common(priv->iobase);
}
-#else
-/**************************************************************************
-HALT - Turn off ethernet interface
-***************************************************************************/
-static void rtl_halt(struct eth_device *dev)
-{
- rtl_halt_common(dev->iobase);
-}
-#endif
-#ifdef CONFIG_DM_ETH
static int rtl8169_write_hwaddr(struct udevice *dev)
{
struct eth_pdata *plat = dev_get_plat(dev);
@@ -965,7 +868,6 @@ static int rtl8169_write_hwaddr(struct udevice *dev)
return 0;
}
-#endif
/**************************************************************************
INIT - Look for an adapter, this routine's visible to the outside
@@ -1118,73 +1020,6 @@ static int rtl_init(unsigned long dev_ioaddr, const char *name,
return 0;
}
-#ifndef CONFIG_DM_ETH
-int rtl8169_initialize(struct bd_info *bis)
-{
- pci_dev_t devno;
- int card_number = 0;
- struct eth_device *dev;
- u32 iobase;
- int idx=0;
-
- while(1){
- unsigned int region;
- u16 device;
- int err;
-
- /* Find RTL8169 */
- if ((devno = pci_find_devices(supported, idx++)) < 0)
- break;
-
- pci_read_config_word(devno, PCI_DEVICE_ID, &device);
- switch (device) {
- case 0x8168:
- region = 2;
- break;
-
- default:
- region = 1;
- break;
- }
-
- pci_read_config_dword(devno, PCI_BASE_ADDRESS_0 + (region * 4), &iobase);
- iobase &= ~0xf;
-
- debug ("rtl8169: REALTEK RTL8169 @0x%x\n", iobase);
-
- dev = (struct eth_device *)malloc(sizeof *dev);
- if (!dev) {
- printf("Can not allocate memory of rtl8169\n");
- break;
- }
-
- memset(dev, 0, sizeof(*dev));
- sprintf (dev->name, "RTL8169#%d", card_number);
-
- dev->priv = (void *)(unsigned long)devno;
- dev->iobase = (int)pci_mem_to_phys(devno, iobase);
-
- dev->init = rtl_reset;
- dev->halt = rtl_halt;
- dev->send = rtl_send;
- dev->recv = rtl_recv;
-
- err = rtl_init(dev->iobase, dev->name, dev->enetaddr);
- if (err < 0) {
- printf(pr_fmt("failed to initialize card: %d\n"), err);
- free(dev);
- continue;
- }
-
- eth_register (dev);
-
- card_number++;
- }
- return card_number;
-}
-#endif
-
-#ifdef CONFIG_DM_ETH
static int rtl8169_eth_probe(struct udevice *dev)
{
struct pci_child_plat *pplat = dev_get_parent_plat(dev);
@@ -1253,4 +1088,3 @@ U_BOOT_DRIVER(eth_rtl8169) = {
};
U_BOOT_PCI_DEVICE(eth_rtl8169, supported);
-#endif
--
2.25.1
More information about the U-Boot
mailing list