[PATCH v4 3/5] rockchip: px30: insert u-boot, spl-boot-device into U-Boot device tree
Quentin Schulz
foss+uboot at 0leil.net
Tue Nov 29 13:19:43 CET 2022
From: Quentin Schulz <quentin.schulz at theobroma-systems.com>
It is possible to boot U-Boot proper from a different storage medium
than the one used by the BOOTROM to load the SPL. This information is
stored in the u-boot,spl-boot-device Device Tree property and is
accessible from U-Boot proper so that it has knowledge at runtime where
it was loaded from.
Let's add support for this feature for px30.
Cc: Quentin Schulz <foss+uboot at 0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
---
arch/arm/mach-rockchip/px30/px30.c | 50 ++++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm/mach-rockchip/px30/px30.c b/arch/arm/mach-rockchip/px30/px30.c
index 481b50235e..5f26128d01 100644
--- a/arch/arm/mach-rockchip/px30/px30.c
+++ b/arch/arm/mach-rockchip/px30/px30.c
@@ -6,6 +6,7 @@
#include <clk.h>
#include <dm.h>
#include <init.h>
+#include <spl.h>
#include <asm/armv8/mmu.h>
#include <asm/io.h>
#include <asm/arch-rockchip/bootrom.h>
@@ -427,3 +428,52 @@ void board_debug_uart_init(void)
#endif /* CONFIG_DEBUG_UART_BASE && CONFIG_DEBUG_UART_BASE == ... */
}
#endif /* CONFIG_DEBUG_UART_BOARD_INIT */
+
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
+const char *spl_decode_boot_device(u32 boot_device)
+{
+ int i;
+ static const struct {
+ u32 boot_device;
+ const char *ofpath;
+ } spl_boot_devices_tbl[] = {
+ { BOOT_DEVICE_MMC2, "/mmc at ff370000" },
+ { BOOT_DEVICE_MMC1, "/mmc at ff390000" },
+ };
+
+ for (i = 0; i < ARRAY_SIZE(spl_boot_devices_tbl); ++i)
+ if (spl_boot_devices_tbl[i].boot_device == boot_device)
+ return spl_boot_devices_tbl[i].ofpath;
+
+ return NULL;
+}
+
+void spl_perform_fixups(struct spl_image_info *spl_image)
+{
+ void *blob = spl_image->fdt_addr;
+ const char *boot_ofpath;
+ int chosen;
+
+ /*
+ * Inject the ofpath of the device the full U-Boot (or Linux in
+ * Falcon-mode) was booted from into the FDT, if a FDT has been
+ * loaded at the same time.
+ */
+ if (!blob)
+ return;
+
+ boot_ofpath = spl_decode_boot_device(spl_image->boot_device);
+ if (!boot_ofpath) {
+ pr_err("%s: could not map boot_device to ofpath\n", __func__);
+ return;
+ }
+
+ chosen = fdt_find_or_add_subnode(blob, 0, "chosen");
+ if (chosen < 0) {
+ pr_err("%s: could not find/create '/chosen'\n", __func__);
+ return;
+ }
+ fdt_setprop_string(blob, chosen,
+ "u-boot,spl-boot-device", boot_ofpath);
+}
+#endif
--
b4 0.10.1
More information about the U-Boot
mailing list