[PATCH] imx8mn-ddr4-evk-u-boot: Fix broken boot

[Fabio Estevam]

When the imx8mm.dtsi file was pulled in from Linux, the UARTs
were moved into an spba sub-node which wasn't being included
in the SPL device tree.  This meant the references to the UART
weren't being handled properly and when booting the system would
constantly reboot.  Fix this by adding the spba node to the spl
device tree to restore normal booting.

Based on the patch from Adam Ford for the imx8mn-beacon-kit-u-boot
board.

Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux")
Signed-off-by: Fabio Estevam <festevam at denx.de>
---
Hi Tom and Stefano,

I know today is release day. Could this one be applied directly?

It fixes a boot regression.

Thanks

 arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
index 78773c198e..3a9ba8b8c9 100644
--- a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
@@ -26,6 +26,10 @@
 	u-boot,dm-spl;
 };
 
+&spba1 {
+	u-boot,dm-spl;
+};
+
 &clk {
 	u-boot,dm-spl;
 	u-boot,dm-pre-reloc;
-- 
2.25.1