[PATCHv2 4/5] fwu: DeveloperBox: add support for FWU

AKASHI Takahiro takahiro.akashi at linaro.org
Tue Oct 4 04:44:12 CEST 2022


On Mon, Oct 03, 2022 at 09:00:35PM -0500, Jassi Brar wrote:
> On Mon, Oct 3, 2022 at 8:06 PM AKASHI Takahiro
> <takahiro.akashi at linaro.org> wrote:
> >
> > On Mon, Oct 03, 2022 at 04:51:32PM +0300, Ilias Apalodimas wrote:
> > > Hi Jassi,
> > >
> > > On Mon, 3 Oct 2022 at 16:40, Jassi Brar <jassisinghbrar at gmail.com> wrote:
> > > >
> > > > On Mon, Oct 3, 2022 at 6:04 AM AKASHI Takahiro
> > > > <takahiro.akashi at linaro.org> wrote:
> > > >
> > > > > > diff --git a/board/socionext/developerbox/developerbox.c b/board/socionext/developerbox/developerbox.c
> > > > > > index f5a5fe0121..a0db26eaf3 100644
> > > > > > --- a/board/socionext/developerbox/developerbox.c
> > > > > > +++ b/board/socionext/developerbox/developerbox.c
> > > > > > @@ -20,6 +20,13 @@
> > > > > >
> > > > > >  #if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> > > > > >  struct efi_fw_image fw_images[] = {
> > > > > > +#if defined(CONFIG_FWU_MULTI_BANK_UPDATE)
> > > > > > +     {
> > > > > > +             .image_type_id = DEVELOPERBOX_FIP_IMAGE_GUID,
> > > > > > +             .fw_name = u"DEVELOPERBOX-FIP",
> > > > > > +             .image_index = 1,
> > > > > > +     },
> > > > > > +#else
> > > > >
> > > > > From curiosity, why do you want to use different capsule formats
> > > > > for multi-bank update and normal case?
> > > > >
> > > > normal/legacy layout has one image for each component - uboot, tfa and
> > > > optee, whereas the new layout contains everything in one fip image.
> >
> > Yes, that is exactly what I understand here.
> >
> > > > So I thought it would be better to make the image_index consistent by
> > > > making the fip's as 1.
> > >
> > > FWIW this does make a lot of sense.  Since the SCP firmware is not
> > > included in the capsule and that SCP firmware is needed to transition
> > > from old -> new layout, I think we are better off having those in
> > > different GUIDs.  On top of that those GUIDs can be used in LVFS if we
> > > ever decide to upload firmwares there.
> > >
> > > Not having discrete GUIDs means there's a chance to brick the board on
> > > old -> new update,  unless the SCP is explicitly updated.
> >
> > SCP? I don't care.
> > My question is why you use a single capsule (FIP) in A/B update while you use
> > three separate capsule files in normal case.
> >
> We think it is cleaner to not tie up boot binaries at fixed offsets in
> storage, so all CA53 boot assets are now in one parseable FIP image.
> Secondly, and personally, I think there is no real usecase of more
> than one image per bank - that will be too fragile and complicated to
> manage.

If so, my point is why not use a single capsule in normal case (a single bank
in another word) as well?

-Takahiro Akashi

> cheers.


More information about the U-Boot mailing list