[PATCH v1 2/3] verdin-imx8mp: spl: initialize caam

[Andrejs Cainikovs]

This change initializes Cryptographic Accelerator and Assurance Module.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs at toradex.com>
---
 board/toradex/verdin-imx8mp/spl.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/board/toradex/verdin-imx8mp/spl.c b/board/toradex/verdin-imx8mp/spl.c
index 6f1931ffaca..1838b464a0d 100644
--- a/board/toradex/verdin-imx8mp/spl.c
+++ b/board/toradex/verdin-imx8mp/spl.c
@@ -17,6 +17,8 @@
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/mxc_i2c.h>
 #include <asm/arch/ddr.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
 #include <power/pmic.h>
 #include <power/pca9450.h>
 
@@ -43,6 +45,15 @@ void spl_dram_init(void)
 
 void spl_board_init(void)
 {
+	if (IS_ENABLED(CONFIG_FSL_CAAM)) {
+		struct udevice *dev;
+		int ret;
+
+		ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
+		if (ret)
+			printf("Failed to initialize caam_jr: %d\n", ret);
+	}
+
 	/*
 	 * Set GIC clock to 500Mhz for OD VDD_SOC. Kernel driver does
 	 * not allow to change it. Should set the clock after PMIC
-- 
2.34.1