[PATCH v5 7/8] net: add MV88E61xx DSA driver
Tim Harvey
tharvey at gateworks.com
Tue Oct 4 18:49:17 CEST 2022
Add a DSA driver for the MV88E61xx compatible GbE Ethernet switches.
Cc: Marek Behún <marek.behun at nic.cz>
Cc: Vladimir Oltean <vladimir.oltean at nxp.com>
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean at nxp.com>
Reviewed-by: Fabio Estevam <festevam at denx.de>
---
v5:
- added support for MV88E6320
- added Fabio's rb tag
v4:
- rename to mv88e6xxx
- sort includes alphabetically
- remove dsa term from function names
- reduce indentation level and remove unecessary code in of probe_mdio function
- rename pdev to mdev to represent mdio device
v3:
- Added Vladimir's rb tag
v2:
- rebase on v2022.07-rc1 (use ofnode_get_phy_node)
- remove unused commented out fields from struct
- remove unused PORT_MASK macro
- remove phy from priv struct name
- refactor code from original drivers/net/phy/mv88e61xx with
suggestions from review to consolidate some functions
into mv88e61xx_dsa_port_enable
- remove unecessary skiping of disabling of CPU port
- remove unecessary dev_set_parent_priv
- remove unnecessary static init flag
- replace debug with a dev_warn if switch device-id unsupported
- remove unnecessary xmit/recv functions as we rely on the fact that
only a single port is active instead of mangling packets
---
drivers/net/Kconfig | 7 +
drivers/net/Makefile | 1 +
drivers/net/mv88e6xxx.c | 833 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 841 insertions(+)
create mode 100644 drivers/net/mv88e6xxx.c
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6bbbadc5eef3..5508dacbcc49 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -438,6 +438,13 @@ config KSZ9477
This driver implements a DSA switch driver for the KSZ9477 family
of GbE switches using the I2C interface.
+config MV88E6XXX
+ bool "Marvell MV88E6xxx GbE switch DSA driver"
+ depends on DM_DSA && DM_MDIO
+ help
+ This driver implements a DSA switch driver for the MV88E6xxx family
+ of GbE switches using the MDIO interface
+
config MVGBE
bool "Marvell Orion5x/Kirkwood network interface support"
depends on ARCH_KIRKWOOD || ARCH_ORION5X
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 96b7678e9882..f05fd58e3fa7 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_MEDIATEK_ETH) += mtk_eth.o
obj-$(CONFIG_MPC8XX_FEC) += mpc8xx_fec.o
obj-$(CONFIG_MT7620_ETH) += mt7620-eth.o
obj-$(CONFIG_MT7628_ETH) += mt7628-eth.o
+obj-$(CONFIG_MV88E6XXX) += mv88e6xxx.o
obj-$(CONFIG_MVGBE) += mvgbe.o
obj-$(CONFIG_MVMDIO) += mvmdio.o
obj-$(CONFIG_MVNETA) += mvneta.o
diff --git a/drivers/net/mv88e6xxx.c b/drivers/net/mv88e6xxx.c
new file mode 100644
index 000000000000..e59e2464c641
--- /dev/null
+++ b/drivers/net/mv88e6xxx.c
@@ -0,0 +1,833 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2022
+ * Gateworks Corporation <www.gateworks.com>
+ * Tim Harvey <tharvey at gateworks.com>
+ *
+ * (C) Copyright 2015
+ * Elecsys Corporation <www.elecsyscorp.com>
+ * Kevin Smith <kevin.smith at elecsyscorp.com>
+ *
+ * Original driver:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ */
+
+/*
+ * DSA driver for mv88e6xxx ethernet switches.
+ *
+ * This driver configures the mv88e6xxx for basic use as a DSA switch.
+ *
+ * This driver was adapted from drivers/net/phy/mv88e61xx and tested
+ * on the mv88e6176 via an SGMII interface.
+ */
+
+#include <bitfield.h>
+#include <common.h>
+#include <dm/device.h>
+#include <dm/device_compat.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <dm/of_extra.h>
+#include <linux/delay.h>
+#include <miiphy.h>
+#include <net/dsa.h>
+
+/* Device addresses */
+#define DEVADDR_PHY(p) (p)
+#define DEVADDR_SERDES 0x0F
+
+/* SMI indirection registers for multichip addressing mode */
+#define SMI_CMD_REG 0x00
+#define SMI_DATA_REG 0x01
+
+/* Global registers */
+#define GLOBAL1_STATUS 0x00
+#define GLOBAL1_CTRL 0x04
+#define GLOBAL1_MON_CTRL 0x1A
+
+/* Global 2 registers */
+#define GLOBAL2_REG_PHY_CMD 0x18
+#define GLOBAL2_REG_PHY_DATA 0x19
+#define GLOBAL2_REG_SCRATCH 0x1A
+
+/* Port registers */
+#define PORT_REG_STATUS 0x00
+#define PORT_REG_PHYS_CTRL 0x01
+#define PORT_REG_SWITCH_ID 0x03
+#define PORT_REG_CTRL 0x04
+#define PORT_REG_VLAN_MAP 0x06
+#define PORT_REG_VLAN_ID 0x07
+#define PORT_REG_LED_CTRL 0x16
+
+/* Phy registers */
+#define PHY_REG_CTRL1 0x10
+#define PHY_REG_STATUS1 0x11
+#define PHY_REG_PAGE 0x16
+
+/* Serdes registers */
+#define SERDES_REG_CTRL_1 0x10
+
+/* Phy page numbers */
+#define PHY_PAGE_COPPER 0
+#define PHY_PAGE_SERDES 1
+
+/* Register fields */
+#define GLOBAL1_CTRL_SWRESET BIT(15)
+
+#define GLOBAL1_MON_CTRL_CPUDEST_SHIFT 4
+#define GLOBAL1_MON_CTRL_CPUDEST_WIDTH 4
+
+#define PORT_REG_STATUS_SPEED_SHIFT 8
+#define PORT_REG_STATUS_SPEED_10 0
+#define PORT_REG_STATUS_SPEED_100 1
+#define PORT_REG_STATUS_SPEED_1000 2
+
+#define PORT_REG_STATUS_CMODE_MASK 0xF
+#define PORT_REG_STATUS_CMODE_100BASE_X 0x8
+#define PORT_REG_STATUS_CMODE_1000BASE_X 0x9
+#define PORT_REG_STATUS_CMODE_SGMII 0xa
+
+#define PORT_REG_PHYS_CTRL_RGMII_DELAY_RXCLK BIT(15)
+#define PORT_REG_PHYS_CTRL_RGMII_DELAY_TXCLK BIT(14)
+#define PORT_REG_PHYS_CTRL_PCS_AN_EN BIT(10)
+#define PORT_REG_PHYS_CTRL_PCS_AN_RST BIT(9)
+#define PORT_REG_PHYS_CTRL_FC_VALUE BIT(7)
+#define PORT_REG_PHYS_CTRL_FC_FORCE BIT(6)
+#define PORT_REG_PHYS_CTRL_LINK_VALUE BIT(5)
+#define PORT_REG_PHYS_CTRL_LINK_FORCE BIT(4)
+#define PORT_REG_PHYS_CTRL_DUPLEX_VALUE BIT(3)
+#define PORT_REG_PHYS_CTRL_DUPLEX_FORCE BIT(2)
+#define PORT_REG_PHYS_CTRL_SPD1000 BIT(1)
+#define PORT_REG_PHYS_CTRL_SPD100 BIT(0)
+#define PORT_REG_PHYS_CTRL_SPD_MASK (BIT(1) | BIT(0))
+
+#define PORT_REG_CTRL_PSTATE_SHIFT 0
+#define PORT_REG_CTRL_PSTATE_WIDTH 2
+
+#define PORT_REG_VLAN_ID_DEF_VID_SHIFT 0
+#define PORT_REG_VLAN_ID_DEF_VID_WIDTH 12
+
+#define PORT_REG_VLAN_MAP_TABLE_SHIFT 0
+#define PORT_REG_VLAN_MAP_TABLE_WIDTH 11
+
+#define SERDES_REG_CTRL_1_FORCE_LINK BIT(10)
+
+/* Field values */
+#define PORT_REG_CTRL_PSTATE_DISABLED 0
+#define PORT_REG_CTRL_PSTATE_FORWARD 3
+
+#define PHY_REG_CTRL1_ENERGY_DET_OFF 0
+#define PHY_REG_CTRL1_ENERGY_DET_SENSE_PULSE 1
+#define PHY_REG_CTRL1_ENERGY_DET_SENSE_ONLY 2
+#define PHY_REG_CTRL1_ENERGY_DET_SENSE_XMIT 3
+
+/* PHY Status Register */
+#define PHY_REG_STATUS1_SPEED 0xc000
+#define PHY_REG_STATUS1_GBIT 0x8000
+#define PHY_REG_STATUS1_100 0x4000
+#define PHY_REG_STATUS1_DUPLEX 0x2000
+#define PHY_REG_STATUS1_SPDDONE 0x0800
+#define PHY_REG_STATUS1_LINK 0x0400
+#define PHY_REG_STATUS1_ENERGY 0x0010
+
+/*
+ * Macros for building commands for indirect addressing modes. These are valid
+ * for both the indirect multichip addressing mode and the PHY indirection
+ * required for the writes to any PHY register.
+ */
+#define SMI_BUSY BIT(15)
+#define SMI_CMD_CLAUSE_22 BIT(12)
+#define SMI_CMD_CLAUSE_22_OP_READ (2 << 10)
+#define SMI_CMD_CLAUSE_22_OP_WRITE (1 << 10)
+
+#define SMI_CMD_READ (SMI_BUSY | SMI_CMD_CLAUSE_22 | \
+ SMI_CMD_CLAUSE_22_OP_READ)
+#define SMI_CMD_WRITE (SMI_BUSY | SMI_CMD_CLAUSE_22 | \
+ SMI_CMD_CLAUSE_22_OP_WRITE)
+
+#define SMI_CMD_ADDR_SHIFT 5
+#define SMI_CMD_ADDR_WIDTH 5
+#define SMI_CMD_REG_SHIFT 0
+#define SMI_CMD_REG_WIDTH 5
+
+/* Defines for Scratch and Misc Registers */
+#define SCRATCH_UPDATE BIT(15)
+#define SCRATCH_ADDR_SHIFT 8
+#define SCRATCH_ADDR_WIDTH 7
+
+/* Scratch registers */
+#define SCRATCH_ADDR_GPIO0DIR 0x62 /* GPIO[7:0] direction 1=input */
+#define SCRATCH_ADDR_GPIO1DIR 0x63 /* GPIO[14:8] direction 1=input */
+#define SCRATCH_ADDR_GPIO0DATA 0x64 /* GPIO[7:0] data */
+#define SCRATCH_ADDR_GPIO1DATA 0x65 /* GPIO[14:8] data */
+#define SCRATCH_ADDR_GPIO0CTRL 0x68 /* GPIO[1:0] control */
+#define SCRATCH_ADDR_GPIO1CTRL 0x69 /* GPIO[3:2] control */
+
+/* ID register values for different switch models */
+#define PORT_SWITCH_ID_6020 0x0200
+#define PORT_SWITCH_ID_6070 0x0700
+#define PORT_SWITCH_ID_6071 0x0710
+#define PORT_SWITCH_ID_6096 0x0980
+#define PORT_SWITCH_ID_6097 0x0990
+#define PORT_SWITCH_ID_6172 0x1720
+#define PORT_SWITCH_ID_6176 0x1760
+#define PORT_SWITCH_ID_6220 0x2200
+#define PORT_SWITCH_ID_6240 0x2400
+#define PORT_SWITCH_ID_6250 0x2500
+#define PORT_SWITCH_ID_6320 0x1150
+#define PORT_SWITCH_ID_6352 0x3520
+
+struct mv88e6xxx_priv {
+ int smi_addr;
+ int id;
+ int port_count; /* Number of switch ports */
+ int port_reg_base; /* Base of the switch port registers */
+ u8 global1; /* Offset of Switch Global 1 registers */
+ u8 global2; /* Offset of Switch Global 2 registers */
+ u8 phy_ctrl1_en_det_shift; /* 'EDet' bit field offset */
+ u8 phy_ctrl1_en_det_width; /* Width of 'EDet' bit field */
+ u8 phy_ctrl1_en_det_ctrl; /* 'EDet' control value */
+};
+
+static inline int smi_cmd(int cmd, int addr, int reg)
+{
+ cmd = bitfield_replace(cmd, SMI_CMD_ADDR_SHIFT, SMI_CMD_ADDR_WIDTH,
+ addr);
+ cmd = bitfield_replace(cmd, SMI_CMD_REG_SHIFT, SMI_CMD_REG_WIDTH, reg);
+ return cmd;
+}
+
+static inline int smi_cmd_read(int addr, int reg)
+{
+ return smi_cmd(SMI_CMD_READ, addr, reg);
+}
+
+static inline int smi_cmd_write(int addr, int reg)
+{
+ return smi_cmd(SMI_CMD_WRITE, addr, reg);
+}
+
+/* Wait for the current SMI indirect command to complete */
+static int mv88e6xxx_smi_wait(struct udevice *dev, int smi_addr)
+{
+ int val;
+ u32 timeout = 100;
+
+ do {
+ val = dm_mdio_read(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_CMD_REG);
+ if (val >= 0 && (val & SMI_BUSY) == 0)
+ return 0;
+
+ mdelay(1);
+ } while (--timeout);
+
+ dev_err(dev, "SMI busy timeout\n");
+ return -ETIMEDOUT;
+}
+
+/*
+ * The mv88e6xxx has three types of addresses: the smi bus address, the device
+ * address, and the register address. The smi bus address distinguishes it on
+ * the smi bus from other PHYs or switches. The device address determines
+ * which on-chip register set you are reading/writing (the various PHYs, their
+ * associated ports, or global configuration registers). The register address
+ * is the offset of the register you are reading/writing.
+ *
+ * When the mv88e6xxx is hardware configured to have address zero, it behaves in
+ * single-chip addressing mode, where it responds to all SMI addresses, using
+ * the smi address as its device address. This obviously only works when this
+ * is the only chip on the SMI bus. This allows the driver to access device
+ * registers without using indirection. When the chip is configured to a
+ * non-zero address, it only responds to that SMI address and requires indirect
+ * writes to access the different device addresses.
+ */
+static int mv88e6xxx_reg_read(struct udevice *dev, int addr, int reg)
+{
+ struct mv88e6xxx_priv *priv = dev_get_priv(dev);
+ int smi_addr = priv->smi_addr;
+ int res;
+
+ /* In single-chip mode, the device can be addressed directly */
+ if (smi_addr == 0)
+ return dm_mdio_read(dev->parent, addr, MDIO_DEVAD_NONE, reg);
+
+ /* Wait for the bus to become free */
+ res = mv88e6xxx_smi_wait(dev, smi_addr);
+ if (res < 0)
+ return res;
+
+ /* Issue the read command */
+ res = dm_mdio_write(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_CMD_REG,
+ smi_cmd_read(addr, reg));
+ if (res < 0)
+ return res;
+
+ /* Wait for the read command to complete */
+ res = mv88e6xxx_smi_wait(dev, smi_addr);
+ if (res < 0)
+ return res;
+
+ /* Read the data */
+ res = dm_mdio_read(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_DATA_REG);
+ if (res < 0)
+ return res;
+
+ return bitfield_extract(res, 0, 16);
+}
+
+/* See the comment above mv88e6xxx_reg_read */
+static int mv88e6xxx_reg_write(struct udevice *dev, int addr, int reg, u16 val)
+{
+ struct mv88e6xxx_priv *priv = dev_get_priv(dev);
+ int smi_addr = priv->smi_addr;
+ int res;
+
+ /* In single-chip mode, the device can be addressed directly */
+ if (smi_addr == 0)
+ return dm_mdio_write(dev->parent, addr, MDIO_DEVAD_NONE, reg, val);
+
+ /* Wait for the bus to become free */
+ res = mv88e6xxx_smi_wait(dev, smi_addr);
+ if (res < 0)
+ return res;
+
+ /* Set the data to write */
+ res = dm_mdio_write(dev->parent, smi_addr, MDIO_DEVAD_NONE,
+ SMI_DATA_REG, val);
+ if (res < 0)
+ return res;
+
+ /* Issue the write command */
+ res = dm_mdio_write(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_CMD_REG,
+ smi_cmd_write(addr, reg));
+ if (res < 0)
+ return res;
+
+ /* Wait for the write command to complete */
+ res = mv88e6xxx_smi_wait(dev, smi_addr);
+ if (res < 0)
+ return res;
+
+ return 0;
+}
+
+static int mv88e6xxx_phy_wait(struct udevice *dev)
+{
+ struct mv88e6xxx_priv *priv = dev_get_priv(dev);
+ int val;
+ u32 timeout = 100;
+
+ do {
+ val = mv88e6xxx_reg_read(dev, priv->global2, GLOBAL2_REG_PHY_CMD);
+ if (val >= 0 && (val & SMI_BUSY) == 0)
+ return 0;
+
+ mdelay(1);
+ } while (--timeout);
+
+ return -ETIMEDOUT;
+}
+
+static int mv88e6xxx_phy_read_indirect(struct udevice *dev, int phyad, int devad, int reg)
+{
+ struct mv88e6xxx_priv *priv = dev_get_priv(dev);
+ int res;
+
+ /* Issue command to read */
+ res = mv88e6xxx_reg_write(dev, priv->global2,
+ GLOBAL2_REG_PHY_CMD,
+ smi_cmd_read(phyad, reg));
+
+ /* Wait for data to be read */
+ res = mv88e6xxx_phy_wait(dev);
+ if (res < 0)
+ return res;
+
+ /* Read retrieved data */
+ return mv88e6xxx_reg_read(dev, priv->global2,
+ GLOBAL2_REG_PHY_DATA);
+}
+
+static int mv88e6xxx_phy_write_indirect(struct udevice *dev, int phyad,
+ int devad, int reg, u16 data)
+{
+ struct mv88e6xxx_priv *priv = dev_get_priv(dev);
+ int res;
+
+ /* Set the data to write */
+ res = mv88e6xxx_reg_write(dev, priv->global2,
+ GLOBAL2_REG_PHY_DATA, data);
+ if (res < 0)
+ return res;
+ /* Issue the write command */
+ res = mv88e6xxx_reg_write(dev, priv->global2,
+ GLOBAL2_REG_PHY_CMD,
+ smi_cmd_write(phyad, reg));
+ if (res < 0)
+ return res;
+
+ /* Wait for command to complete */
+ return mv88e6xxx_phy_wait(dev);
+}
+
+/* Wrapper function to make calls to phy_read_indirect simpler */
+static int mv88e6xxx_phy_read(struct udevice *dev, int phy, int reg)
+{
+ return mv88e6xxx_phy_read_indirect(dev, DEVADDR_PHY(phy),
+ MDIO_DEVAD_NONE, reg);
+}
+
+/* Wrapper function to make calls to phy_write_indirect simpler */
+static int mv88e6xxx_phy_write(struct udevice *dev, int phy, int reg, u16 val)
+{
+ return mv88e6xxx_phy_write_indirect(dev, DEVADDR_PHY(phy),
+ MDIO_DEVAD_NONE, reg, val);
+}
+
+static int mv88e6xxx_port_read(struct udevice *dev, u8 port, u8 reg)
+{
+ struct mv88e6xxx_priv *priv = dev_get_priv(dev);
+
+ return mv88e6xxx_reg_read(dev, priv->port_reg_base + port, reg);
+}
+
+static int mv88e6xxx_port_write(struct udevice *dev, u8 port, u8 reg, u16 val)
+{
+ struct mv88e6xxx_priv *priv = dev_get_priv(dev);
+
+ return mv88e6xxx_reg_write(dev, priv->port_reg_base + port, reg, val);
+}
+
+static int mv88e6xxx_set_page(struct udevice *dev, u8 phy, u8 page)
+{
+ return mv88e6xxx_phy_write(dev, phy, PHY_REG_PAGE, page);
+}
+
+static int mv88e6xxx_get_switch_id(struct udevice *dev)
+{
+ int res;
+
+ res = mv88e6xxx_port_read(dev, 0, PORT_REG_SWITCH_ID);
+ if (res < 0)
+ return res;
+ return res & 0xfff0;
+}
+
+static bool mv88e6xxx_6352_family(struct udevice *dev)
+{
+ struct mv88e6xxx_priv *priv = dev_get_priv(dev);
+
+ switch (priv->id) {
+ case PORT_SWITCH_ID_6172:
+ case PORT_SWITCH_ID_6176:
+ case PORT_SWITCH_ID_6240:
+ case PORT_SWITCH_ID_6352:
+ return true;
+ }
+ return false;
+}
+
+static int mv88e6xxx_get_cmode(struct udevice *dev, u8 port)
+{
+ int res;
+
+ res = mv88e6xxx_port_read(dev, port, PORT_REG_STATUS);
+ if (res < 0)
+ return res;
+ return res & PORT_REG_STATUS_CMODE_MASK;
+}
+
+static int mv88e6xxx_switch_reset(struct udevice *dev)
+{
+ struct mv88e6xxx_priv *priv = dev_get_priv(dev);
+ int time;
+ int val;
+ u8 port;
+
+ /* Disable all ports */
+ for (port = 0; port < priv->port_count; port++) {
+ val = mv88e6xxx_port_read(dev, port, PORT_REG_CTRL);
+ if (val < 0)
+ return val;
+ val = bitfield_replace(val, PORT_REG_CTRL_PSTATE_SHIFT,
+ PORT_REG_CTRL_PSTATE_WIDTH,
+ PORT_REG_CTRL_PSTATE_DISABLED);
+ val = mv88e6xxx_port_write(dev, port, PORT_REG_CTRL, val);
+ if (val < 0)
+ return val;
+ }
+
+ /* Wait 2 ms for queues to drain */
+ udelay(2000);
+
+ /* Reset switch */
+ val = mv88e6xxx_reg_read(dev, priv->global1, GLOBAL1_CTRL);
+ if (val < 0)
+ return val;
+ val |= GLOBAL1_CTRL_SWRESET;
+ val = mv88e6xxx_reg_write(dev, priv->global1, GLOBAL1_CTRL, val);
+ if (val < 0)
+ return val;
+
+ /* Wait up to 1 second for switch reset complete */
+ for (time = 1000; time; time--) {
+ val = mv88e6xxx_reg_read(dev, priv->global1, GLOBAL1_CTRL);
+ if (val >= 0 && ((val & GLOBAL1_CTRL_SWRESET) == 0))
+ break;
+ udelay(1000);
+ }
+ if (!time)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int mv88e6xxx_serdes_init(struct udevice *dev)
+{
+ int val;
+
+ val = mv88e6xxx_set_page(dev, DEVADDR_SERDES, PHY_PAGE_SERDES);
+ if (val < 0)
+ return val;
+
+ /* Power up serdes module */
+ val = mv88e6xxx_phy_read(dev, DEVADDR_SERDES, MII_BMCR);
+ if (val < 0)
+ return val;
+ val &= ~(BMCR_PDOWN);
+ val = mv88e6xxx_phy_write(dev, DEVADDR_SERDES, MII_BMCR, val);
+ if (val < 0)
+ return val;
+
+ return 0;
+}
+
+static int mv88e6xxx_fixed_port_setup(struct udevice *dev, u8 port)
+{
+ struct dsa_pdata *dsa_pdata = dev_get_uclass_plat(dev);
+ struct mv88e6xxx_priv *priv = dev_get_priv(dev);
+ int val;
+
+ val = mv88e6xxx_port_read(dev, port, PORT_REG_PHYS_CTRL);
+ if (val < 0)
+ return val;
+
+ val &= ~(PORT_REG_PHYS_CTRL_SPD_MASK |
+ PORT_REG_PHYS_CTRL_FC_VALUE |
+ PORT_REG_PHYS_CTRL_FC_FORCE);
+ val |= PORT_REG_PHYS_CTRL_FC_FORCE |
+ PORT_REG_PHYS_CTRL_DUPLEX_VALUE |
+ PORT_REG_PHYS_CTRL_DUPLEX_FORCE;
+
+ if (priv->id == PORT_SWITCH_ID_6071) {
+ val |= PORT_REG_PHYS_CTRL_SPD100;
+ } else {
+ val |= PORT_REG_PHYS_CTRL_PCS_AN_EN |
+ PORT_REG_PHYS_CTRL_PCS_AN_RST |
+ PORT_REG_PHYS_CTRL_SPD1000;
+ }
+
+ if (port == dsa_pdata->cpu_port)
+ val |= PORT_REG_PHYS_CTRL_LINK_VALUE |
+ PORT_REG_PHYS_CTRL_LINK_FORCE;
+
+ return mv88e6xxx_port_write(dev, port, PORT_REG_PHYS_CTRL, val);
+}
+
+/*
+ * This function is used to pre-configure the required register
+ * offsets, so that the indirect register access to the PHY registers
+ * is possible. This is necessary to be able to read the PHY ID
+ * while driver probing or in get_phy_id(). The globalN register
+ * offsets must be initialized correctly for a detected switch,
+ * otherwise detection of the PHY ID won't work!
+ */
+static int mv88e6xxx_priv_reg_offs_pre_init(struct udevice *dev)
+{
+ struct mv88e6xxx_priv *priv = dev_get_priv(dev);
+
+ /*
+ * Initial 'port_reg_base' value must be an offset of existing
+ * port register, then reading the ID should succeed. First, try
+ * to read via port registers with device address 0x10 (88E6096
+ * and compatible switches).
+ */
+ priv->port_reg_base = 0x10;
+ priv->id = mv88e6xxx_get_switch_id(dev);
+ if (priv->id != 0xfff0) {
+ priv->global1 = 0x1B;
+ priv->global2 = 0x1C;
+ return 0;
+ }
+
+ /*
+ * Now try via port registers with device address 0x08
+ * (88E6020 and compatible switches).
+ */
+ priv->port_reg_base = 0x08;
+ priv->id = mv88e6xxx_get_switch_id(dev);
+ if (priv->id != 0xfff0) {
+ priv->global1 = 0x0F;
+ priv->global2 = 0x07;
+ return 0;
+ }
+
+ dev_warn(dev, "%s Unknown ID 0x%x\n", __func__, priv->id);
+
+ return -ENODEV;
+}
+
+static int mv88e6xxx_mdio_read(struct udevice *dev, int addr, int devad, int reg)
+{
+ return mv88e6xxx_phy_read_indirect(dev->parent, DEVADDR_PHY(addr),
+ MDIO_DEVAD_NONE, reg);
+}
+
+static int mv88e6xxx_mdio_write(struct udevice *dev, int addr, int devad,
+ int reg, u16 val)
+{
+ return mv88e6xxx_phy_write_indirect(dev->parent, DEVADDR_PHY(addr),
+ MDIO_DEVAD_NONE, reg, val);
+}
+
+static const struct mdio_ops mv88e6xxx_mdio_ops = {
+ .read = mv88e6xxx_mdio_read,
+ .write = mv88e6xxx_mdio_write,
+};
+
+static int mv88e6xxx_mdio_bind(struct udevice *dev)
+{
+ char name[32];
+ static int num_devices;
+
+ sprintf(name, "mv88e6xxx-mdio-%d", num_devices++);
+ device_set_name(dev, name);
+
+ return 0;
+}
+
+U_BOOT_DRIVER(mv88e6xxx_mdio) = {
+ .name = "mv88e6xxx_mdio",
+ .id = UCLASS_MDIO,
+ .ops = &mv88e6xxx_mdio_ops,
+ .bind = mv88e6xxx_mdio_bind,
+ .priv_auto = sizeof(struct mv88e6xxx_priv),
+ .plat_auto = sizeof(struct mdio_perdev_priv),
+};
+
+static int mv88e6xxx_port_enable(struct udevice *dev, int port, struct phy_device *phy)
+{
+ struct dsa_pdata *dsa_pdata = dev_get_uclass_plat(dev);
+ struct mv88e6xxx_priv *priv = dev_get_priv(dev);
+ int val, ret;
+
+ dev_dbg(dev, "%s P%d phy:0x%08x %s\n", __func__, port,
+ phy->phy_id, phy_string_for_interface(phy->interface));
+
+ /*
+ * Enable energy-detect sensing on PHY, used to determine when a PHY
+ * port is physically connected
+ */
+ val = mv88e6xxx_phy_read(dev, port, PHY_REG_CTRL1);
+ if (val < 0)
+ return val;
+ val = bitfield_replace(val, priv->phy_ctrl1_en_det_shift,
+ priv->phy_ctrl1_en_det_width,
+ priv->phy_ctrl1_en_det_ctrl);
+ val = mv88e6xxx_phy_write(dev, port, PHY_REG_CTRL1, val);
+ if (val < 0)
+ return val;
+
+ /* enable port */
+ val = mv88e6xxx_port_read(dev, port, PORT_REG_CTRL);
+ if (val < 0)
+ return val;
+ val = bitfield_replace(val, PORT_REG_CTRL_PSTATE_SHIFT,
+ PORT_REG_CTRL_PSTATE_WIDTH,
+ PORT_REG_CTRL_PSTATE_FORWARD);
+ val = mv88e6xxx_port_write(dev, port, PORT_REG_CTRL, val);
+ if (val < 0)
+ return val;
+
+ /* configure RGMII delays for fixed link */
+ if (phy->phy_id == PHY_FIXED_ID) {
+ /* Physical Control register: Table 62 */
+ val = mv88e6xxx_port_read(dev, port, PORT_REG_PHYS_CTRL);
+ val &= ~(PORT_REG_PHYS_CTRL_RGMII_DELAY_RXCLK ||
+ PORT_REG_PHYS_CTRL_RGMII_DELAY_TXCLK);
+ if (phy->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ phy->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ val |= PORT_REG_PHYS_CTRL_RGMII_DELAY_RXCLK;
+ if (phy->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ phy->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ val |= PORT_REG_PHYS_CTRL_RGMII_DELAY_TXCLK;
+ val |= BIT(5) | BIT(4); /* Force link */
+ ret = mv88e6xxx_port_write(dev, port, PORT_REG_PHYS_CTRL, val);
+ if (ret < 0)
+ return ret;
+
+ ret = mv88e6xxx_fixed_port_setup(dev, port);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (port == dsa_pdata->cpu_port) {
+ /* Set CPUDest for cpu port */
+ val = mv88e6xxx_reg_read(dev, priv->global1, GLOBAL1_MON_CTRL);
+ if (val < 0)
+ return val;
+ val = bitfield_replace(val, GLOBAL1_MON_CTRL_CPUDEST_SHIFT,
+ GLOBAL1_MON_CTRL_CPUDEST_WIDTH, port);
+ val = mv88e6xxx_reg_write(dev, priv->global1, GLOBAL1_MON_CTRL, val);
+ if (val < 0)
+ return val;
+
+ if (mv88e6xxx_6352_family(dev)) {
+ /* initialize serdes */
+ val = mv88e6xxx_get_cmode(dev, dsa_pdata->cpu_port);
+ if (val < 0)
+ return val;
+ if (val == PORT_REG_STATUS_CMODE_100BASE_X ||
+ val == PORT_REG_STATUS_CMODE_1000BASE_X ||
+ val == PORT_REG_STATUS_CMODE_SGMII) {
+ val = mv88e6xxx_serdes_init(dev);
+ if (val < 0)
+ return val;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static void mv88e6xxx_port_disable(struct udevice *dev, int port, struct phy_device *phy)
+{
+ int val;
+
+ dev_dbg(dev, "%s P%d phy:0x%x\n", __func__, port, phy->phy_id);
+
+ val = mv88e6xxx_port_read(dev, port, PORT_REG_CTRL);
+ if (val < 0)
+ return;
+ val = bitfield_replace(val, PORT_REG_CTRL_PSTATE_SHIFT,
+ PORT_REG_CTRL_PSTATE_WIDTH,
+ PORT_REG_CTRL_PSTATE_DISABLED);
+ val = mv88e6xxx_port_write(dev, port, PORT_REG_CTRL, val);
+ if (val < 0)
+ return;
+}
+
+static const struct dsa_ops mv88e6xxx_dsa_ops = {
+ .port_enable = mv88e6xxx_port_enable,
+ .port_disable = mv88e6xxx_port_disable,
+};
+
+/* bind and probe the switch mdios */
+static int mv88e6xxx_probe_mdio(struct udevice *dev)
+{
+ struct udevice *mdev;
+ ofnode node, mdios;
+ const char *name;
+ int ret;
+
+ /* bind phy ports of mdios child node to mv88e6xxx_mdio device */
+ mdios = dev_read_subnode(dev, "mdios");
+ if (!ofnode_valid(mdios))
+ return 0;
+
+ ofnode_for_each_subnode(node, mdios) {
+ name = ofnode_get_name(node);
+ ret = device_bind_driver_to_node(dev,
+ "mv88e6xxx_mdio",
+ name, node, NULL);
+ if (ret) {
+ dev_err(dev, "failed to bind %s: %d\n", name, ret);
+ continue;
+ }
+
+ /* need to probe it as there is no compatible to do so */
+ ret = uclass_get_device_by_ofnode(UCLASS_MDIO, node, &mdev);
+ if (ret) {
+ dev_err(dev, "failed to probe %s: %d\n", name, ret);
+ continue;
+ }
+ }
+
+ return ret;
+}
+
+static int mv88e6xxx_probe(struct udevice *dev)
+{
+ struct mv88e6xxx_priv *priv = dev_get_priv(dev);
+ struct udevice *master = dsa_get_master(dev);
+ int ret;
+
+ if (!master)
+ return -ENODEV;
+
+ dev_dbg(dev, "%s master:%s\n", __func__, master->name);
+
+ /* probe internal mdio bus */
+ ret = mv88e6xxx_probe_mdio(dev);
+ if (ret)
+ return ret;
+
+ ret = mv88e6xxx_priv_reg_offs_pre_init(dev);
+ if (ret)
+ return ret;
+
+ dev_dbg(dev, "ID=0x%x PORT_BASE=0x%02x GLOBAL1=0x%02x GLOBAL2=0x%02x\n",
+ priv->id, priv->port_reg_base, priv->global1, priv->global2);
+ switch (priv->id) {
+ case PORT_SWITCH_ID_6096:
+ case PORT_SWITCH_ID_6097:
+ case PORT_SWITCH_ID_6172:
+ case PORT_SWITCH_ID_6176:
+ case PORT_SWITCH_ID_6240:
+ case PORT_SWITCH_ID_6352:
+ priv->port_count = 11;
+ priv->phy_ctrl1_en_det_shift = 8;
+ priv->phy_ctrl1_en_det_width = 2;
+ priv->phy_ctrl1_en_det_ctrl =
+ PHY_REG_CTRL1_ENERGY_DET_SENSE_XMIT;
+ break;
+ case PORT_SWITCH_ID_6020:
+ case PORT_SWITCH_ID_6070:
+ case PORT_SWITCH_ID_6071:
+ case PORT_SWITCH_ID_6220:
+ case PORT_SWITCH_ID_6250:
+ case PORT_SWITCH_ID_6320:
+ priv->port_count = 7;
+ priv->phy_ctrl1_en_det_shift = 14;
+ priv->phy_ctrl1_en_det_width = 1;
+ priv->phy_ctrl1_en_det_ctrl =
+ PHY_REG_CTRL1_ENERGY_DET_SENSE_PULSE;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ ret = mv88e6xxx_switch_reset(dev);
+ if (ret < 0)
+ return ret;
+
+ dsa_set_tagging(dev, 0, 0);
+
+ return 0;
+}
+
+static const struct udevice_id mv88e6xxx_ids[] = {
+ { .compatible = "marvell,mv88e6085" },
+ { }
+};
+
+U_BOOT_DRIVER(mv88e6xxx) = {
+ .name = "mv88e6xxx",
+ .id = UCLASS_DSA,
+ .of_match = mv88e6xxx_ids,
+ .probe = mv88e6xxx_probe,
+ .ops = &mv88e6xxx_dsa_ops,
+ .priv_auto = sizeof(struct mv88e6xxx_priv),
+};
--
2.25.1
More information about the U-Boot
mailing list