[PATCH 2/7] mtd/nand: try to erase bad blocks only if scrub flag is provided
Michael Nazzareno Trimarchi
michael at amarulasolutions.com
Thu Oct 6 08:56:08 CEST 2022
Hi
On Thu, Oct 6, 2022 at 5:15 AM <mikhail.kshevetskiy at iopsys.eu> wrote:
>
> From: Mikhail Kshevetskiy <mikhail.kshevetskiy at iopsys.eu>
>
> 'mtd erase' command should not erase bad blocks. To force bad block erasing
> there is 'mtd erase.dontskipbad' command (this command sets 'scrub' flag
> to true in the erase_info structure). Unfortunately nand layer ignore
> scrub flag and try to erases bad blocks unconditionally. This is wrong.
>
> Add checks to allow bad block erasing only if scrub flag is set.
>
> Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy at iopsys.eu>
> ---
> drivers/mtd/nand/core.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/nand/core.c b/drivers/mtd/nand/core.c
> index 99c29670c7..a4fb7602c9 100644
> --- a/drivers/mtd/nand/core.c
> +++ b/drivers/mtd/nand/core.c
> @@ -174,7 +174,10 @@ int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo)
> nanddev_offs_to_pos(nand, einfo->addr + einfo->len - 1, &last);
> while (nanddev_pos_cmp(&pos, &last) <= 0) {
> schedule();
> - ret = nanddev_erase(nand, &pos);
> + if (!einfo->scrub && nanddev_isbad(nand, &pos))
The nandev_erase already check it here:
if (nanddev_isbad(nand, pos) || nanddev_isreserved(nand, pos)) {
> + ret = -EIO;
> + else
> + ret = nanddev_erase(nand, &pos);
erase opt should already take in account scrub.
Please extend the problem
Michael
> if (ret) {
> einfo->fail_addr = nanddev_pos_to_offs(nand, &pos);
>
> --
> 2.35.1
>
--
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
michael at amarulasolutions.com
__________________________________
Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
info at amarulasolutions.com
www.amarulasolutions.com
More information about the U-Boot
mailing list