[PATCH v2 2/2] mach-meson: g12a: reset usb controller in reset_misc()

[Marek Vasut]

On 10/11/22 09:12, neil.armstrong at linaro.org wrote:
> On 10/10/2022 19:16, Marek Vasut wrote:
>> On 10/10/22 18:22, Neil Armstrong wrote:
>>> Hi,
>>
>> Hi,
>>
>>> On 10/10/2022 18:09, Marek Vasut wrote:
>>>> On 10/7/22 11:38, Mattijs Korpershoek wrote:
>>>>> On some g12a boards like the VIM3L and the SEI610, with some
>>>>> USB cables/hosts, there is a long (5s) delay before
>>>>> between "fastboot reboot" and the host detecting a USB reset.
>>>>>
>>>>> This breaks tools relying on "fastboot reboot fastboot" which assume
>>>>> that 1s after the command send, the board should disconnect on usb.
>>>>>
>>>>> To reproduce, enable fastboot in U-Boot console:
>>>>> => fastboot usb 0
>>>>>
>>>>> Then, on the host, run:
>>>>>    # echo "running fastboot reboot bootloader" > /dev/kmsg && 
>>>>> fastboot reboot bootloader
>>>>>    Rebooting into bootloader                          OKAY [  0.003s]
>>>>>    Finished. Total time: 3.033s
>>>>>
>>>>>    [54074.251551] running fastboot reboot bootloader
>>>>>    ... there is a delay of 5s before we detect a disconnection ...
>>>>>    [54079.041238] usb 1-7.4: USB disconnect, device number 72
>>>>>    [54079.239625] usb 1-7.4: new high-speed USB device number 73 
>>>>> using xhci_hcd
>>>>>    [54079.359103] usb 1-7.4: New USB device found, idVendor=1b8e, 
>>>>> idProduct=fada, bcdDevice= 2.27
>>>>>    [54079.359110] usb 1-7.4: New USB device strings: Mfr=1, 
>>>>> Product=2, SerialNumber=3
>>>>>    [54079.359112] usb 1-7.4: Product: USB download gadget
>>>>>    [54079.359114] usb 1-7.4: Manufacturer: U-Boot
>>>>>    [54079.359116] usb 1-7.4: SerialNumber: C8631470CC41
>>>>>
>>>>> Note: this does not happen when we use the RST button on the board.
>>>>>
>>>>> To fix this, re-implement a platform reset which calls
>>>>> board_usb_cleanup() before resetting the board.
>>>>
>>>> Shouldn't that call happen somewhere in drivers/usb/ .remove() 
>>>> callback instead ?
>>>
>>> No since dwc2 isn't DM yet, handling is done in arch/arm/mac-meson 
>>> board_usb_*() for now
>>
>> Seems DWC2 is DM:
>>
>> $ git grep U_BOOT_DRIVER drivers/usb/ | grep dwc2
>> drivers/usb/gadget/dwc2_udc_otg.c:U_BOOT_DRIVER(dwc2_udc_otg) = {
>> drivers/usb/host/dwc2.c:U_BOOT_DRIVER(usb_dwc2) = {
>>
> 
> My bad, seems I missed the dwc2 otg DM wagon...
> 
> We will need to switch to this now then, thanks,

Thanks. I picked 1/2 at least, so you can only focus on 2/2 and send 
just that.