[PATCH] stm32mp: fix compilation issue with DEBUG_UART

Patrice CHOTARD patrice.chotard at foss.st.com
Wed Oct 12 10:43:06 CEST 2022


On 10/11/22 16:44, Patrick Delaunay wrote:
> Fix the compilation issue when CONFIG_DEBUG_UART is activated
> 
>  drivers/serial/serial_stm32.o: in function `debug_uart_init':
>  drivers/serial/serial_stm32.c:291: undefined reference to \
>     `board_debug_uart_init'
> 
> The board_debug_uart_init is needed for SPL boot, called in
> cpu.c::mach_cpu_init(); it is defined in board/st/stm32mp1/spl.c.
> 
> But with the removal #ifdefs patch, the function debug_uart_init() is
> always compiled even if not present in the final U-Boot image.
> 
> This patch adds a file to provided this function when DEBUG_UART and SPL
> are activated.
> 
> Fixes: c8b2eef52b6c ("stm32mp15: tidy up #ifdefs in cpu.c")
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
>  arch/arm/mach-stm32mp/Kconfig.15x |  2 +-
>  board/engicam/stm32mp1/Makefile   |  2 ++
>  board/engicam/stm32mp1/spl.c      | 25 -------------------------
>  board/st/stm32mp1/Makefile        |  2 ++
>  board/st/stm32mp1/debug_uart.c    | 29 +++++++++++++++++++++++++++++
>  board/st/stm32mp1/spl.c           | 28 ----------------------------
>  6 files changed, 34 insertions(+), 54 deletions(-)
>  create mode 100644 board/st/stm32mp1/debug_uart.c
> 
> diff --git a/arch/arm/mach-stm32mp/Kconfig.15x b/arch/arm/mach-stm32mp/Kconfig.15x
> index d516270292a..5bd9b53a5d8 100644
> --- a/arch/arm/mach-stm32mp/Kconfig.15x
> +++ b/arch/arm/mach-stm32mp/Kconfig.15x
> @@ -117,7 +117,7 @@ endif
>  if DEBUG_UART
>  
>  config DEBUG_UART_BOARD_INIT
> -	default y
> +	default y if SPL
>  
>  # debug on UART4 by default
>  config DEBUG_UART_BASE
> diff --git a/board/engicam/stm32mp1/Makefile b/board/engicam/stm32mp1/Makefile
> index 65560df2900..155d33f9eec 100644
> --- a/board/engicam/stm32mp1/Makefile
> +++ b/board/engicam/stm32mp1/Makefile
> @@ -8,3 +8,5 @@ obj-y += spl.o
>  else
>  obj-y += stm32mp1.o
>  endif
> +
> +obj-$(CONFIG_DEBUG_UART_BOARD_INIT) += ../../st/stm32mp1/debug_uart.o
> diff --git a/board/engicam/stm32mp1/spl.c b/board/engicam/stm32mp1/spl.c
> index 3aa738b3faa..2b7779cc01d 100644
> --- a/board/engicam/stm32mp1/spl.c
> +++ b/board/engicam/stm32mp1/spl.c
> @@ -6,7 +6,6 @@
>   */
>  
>  #include <common.h>
> -#include <asm/io.h>
>  
>  /* board early initialisation in board_f: need to use global variable */
>  static u32 opp_voltage_mv __section(".data");
> @@ -22,27 +21,3 @@ int board_early_init_f(void)
>  	return 0;
>  }
>  
> -#ifdef CONFIG_DEBUG_UART_BOARD_INIT
> -void board_debug_uart_init(void)
> -{
> -#if (CONFIG_DEBUG_UART_BASE == STM32_UART4_BASE)
> -
> -#define RCC_MP_APB1ENSETR (STM32_RCC_BASE + 0x0A00)
> -#define RCC_MP_AHB4ENSETR (STM32_RCC_BASE + 0x0A28)
> -
> -	/* UART4 clock enable */
> -	setbits_le32(RCC_MP_APB1ENSETR, BIT(16));
> -
> -#define GPIOG_BASE 0x50008000
> -	/* GPIOG clock enable */
> -	writel(BIT(6), RCC_MP_AHB4ENSETR);
> -	/* GPIO configuration for ST boards: Uart4 TX = G11 */
> -	writel(0xffbfffff, GPIOG_BASE + 0x00);
> -	writel(0x00006000, GPIOG_BASE + 0x24);
> -#else
> -
> -#error("CONFIG_DEBUG_UART_BASE: not supported value")
> -
> -#endif
> -}
> -#endif
> diff --git a/board/st/stm32mp1/Makefile b/board/st/stm32mp1/Makefile
> index 65560df2900..f2d720b67b3 100644
> --- a/board/st/stm32mp1/Makefile
> +++ b/board/st/stm32mp1/Makefile
> @@ -8,3 +8,5 @@ obj-y += spl.o
>  else
>  obj-y += stm32mp1.o
>  endif
> +
> +obj-$(CONFIG_DEBUG_UART_BOARD_INIT) += debug_uart.o
> diff --git a/board/st/stm32mp1/debug_uart.c b/board/st/stm32mp1/debug_uart.c
> new file mode 100644
> index 00000000000..24e3f9f2201
> --- /dev/null
> +++ b/board/st/stm32mp1/debug_uart.c
> @@ -0,0 +1,29 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
> +/*
> + * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
> + */
> +
> +#include <config.h>
> +#include <debug_uart.h>
> +#include <asm/io.h>
> +#include <asm/arch/stm32.h>
> +#include <linux/bitops.h>
> +
> +#define RCC_MP_APB1ENSETR (STM32_RCC_BASE + 0x0A00)
> +#define RCC_MP_AHB4ENSETR (STM32_RCC_BASE + 0x0A28)
> +
> +#define GPIOG_BASE 0x50008000
> +
> +void board_debug_uart_init(void)
> +{
> +	if (CONFIG_DEBUG_UART_BASE == STM32_UART4_BASE) {
> +		/* UART4 clock enable */
> +		setbits_le32(RCC_MP_APB1ENSETR, BIT(16));
> +
> +		/* GPIOG clock enable */
> +		writel(BIT(6), RCC_MP_AHB4ENSETR);
> +		/* GPIO configuration for ST boards: Uart4 TX = G11 */
> +		writel(0xffbfffff, GPIOG_BASE + 0x00);
> +		writel(0x00006000, GPIOG_BASE + 0x24);
> +	}
> +}
> diff --git a/board/st/stm32mp1/spl.c b/board/st/stm32mp1/spl.c
> index 8e4549a1b35..747ec7e445a 100644
> --- a/board/st/stm32mp1/spl.c
> +++ b/board/st/stm32mp1/spl.c
> @@ -5,11 +5,7 @@
>  
>  #include <config.h>
>  #include <common.h>
> -#include <init.h>
> -#include <asm/io.h>
>  #include <asm/arch/sys_proto.h>
> -#include <linux/bitops.h>
> -#include <linux/delay.h>
>  #include "../common/stpmic1.h"
>  
>  /* board early initialisation in board_f: need to use global variable */
> @@ -29,27 +25,3 @@ int board_early_init_f(void)
>  	return 0;
>  }
>  
> -#ifdef CONFIG_DEBUG_UART_BOARD_INIT
> -void board_debug_uart_init(void)
> -{
> -#if (CONFIG_DEBUG_UART_BASE == STM32_UART4_BASE)
> -
> -#define RCC_MP_APB1ENSETR (STM32_RCC_BASE + 0x0A00)
> -#define RCC_MP_AHB4ENSETR (STM32_RCC_BASE + 0x0A28)
> -
> -	/* UART4 clock enable */
> -	setbits_le32(RCC_MP_APB1ENSETR, BIT(16));
> -
> -#define GPIOG_BASE 0x50008000
> -	/* GPIOG clock enable */
> -	writel(BIT(6), RCC_MP_AHB4ENSETR);
> -	/* GPIO configuration for ST boards: Uart4 TX = G11 */
> -	writel(0xffbfffff, GPIOG_BASE + 0x00);
> -	writel(0x00006000, GPIOG_BASE + 0x24);
> -#else
> -
> -#error("CONFIG_DEBUG_UART_BASE: not supported value")
> -
> -#endif
> -}
> -#endif

Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks
Patrice



More information about the U-Boot mailing list