[PATCH 1/3] mmc: zynq_sdhci: Change node_id prototype to u32

[정재훈]

Hi,

> -----Original Message-----
> From: Soma, Ashok Reddy [mailto:ashok.reddy.soma at amd.com]
> Sent: Wednesday, October 12, 2022 3:27 PM
> To: Jaehoon Chung <jh80.chung at gmail.com>; u-boot at lists.denx.de
> Cc: Simek, Michal <michal.simek at amd.com>; peng.fan at nxp.com; jh80.chung at samsung.com; Halder, Ayan
> Kumar <ayan.kumar.halder at amd.com>; Mehta, Piyush <piyush.mehta at amd.com>;
> lakshmi.sai.krishna.potthuri at amd.com; shravya.kumbham at amd.com
> Subject: RE: [PATCH 1/3] mmc: zynq_sdhci: Change node_id prototype to u32
> 
> Hi Jaehoon,
> 
> >-----Original Message-----
> >From: Jaehoon Chung <jh80.chung at gmail.com>
> >Sent: Friday, October 7, 2022 6:16 PM
> >To: Soma, Ashok Reddy <ashok.reddy.soma at amd.com>; u-boot at lists.denx.de
> >Cc: Simek, Michal <michal.simek at amd.com>; peng.fan at nxp.com; jh80.chung at samsung.com; Halder, Ayan
> Kumar <ayan.kumar.halder at amd.com>; Mehta, Piyush <piyush.mehta at amd.com>;
> lakshmi.sai.krishna.potthuri at amd.com; shravya.kumbham at amd.com
> >Subject: Re: [PATCH 1/3] mmc: zynq_sdhci: Change node_id prototype to u32
> >
> >
> >
> >On 9/30/22 18:25, Ashok Reddy Soma wrote:
> >> In Versal platform power domain node_id is bigger than u8, hence
> >> change prototype to u32 to accommodate. Change u8 to u32 in the
> >> function prototypes that use node_id and remove casting to u32 from
> >> xilinx_pm_request() call parameters.
> >>
> >> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma at amd.com>
> >> ---
> >>
> >>  drivers/mmc/zynq_sdhci.c | 14 +++++++-------
> >>  1 file changed, 7 insertions(+), 7 deletions(-)
> >>
> >> diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index
> >> 8f4071c8c2..3a4194452c 100644
> >> --- a/drivers/mmc/zynq_sdhci.c
> >> +++ b/drivers/mmc/zynq_sdhci.c
> >> @@ -111,7 +111,7 @@ static const u8 mode2timing[] = {
> >>  	[MMC_HS_200] = MMC_TIMING_MMC_HS200,  };
> >>
> >> -static inline int arasan_zynqmp_set_in_tapdelay(u8 node_id, u32
> >> itap_delay)
> >> +static inline int arasan_zynqmp_set_in_tapdelay(u32 node_id, u32
> >> +itap_delay)
> >
> >Is it passed by u8 from sdhci_zynqmp_sampleclk_set_pahse()?
> 
> Seems like I missed to change the type to u32 from where these functions are called. But those
> lines are removed in patch 2/3.
> Should I send V2 or is it okay ?

I think that it doesn't need to resend V2. As you mentioned, it's removed on patch 2/3.
And it was already applied. Sorry for reviewed too late. 

Thanks!

Best Regards,
Jaehoon Chung

> 
> Thanks,
> Ashok
> >
> >
> >Best Regards,
> >Jaehoon Chung
> >
> >>  {
> >>  	int ret;
> >>
> >> @@ -155,7 +155,7 @@ static inline int arasan_zynqmp_set_in_tapdelay(u8 node_id, u32 itap_delay)
> >>  		if (ret)
> >>  			return ret;
> >>  	} else {
> >> -		return xilinx_pm_request(PM_IOCTL, (u32)node_id,
> >> +		return xilinx_pm_request(PM_IOCTL, node_id,
> >>  					 IOCTL_SET_SD_TAPDELAY,
> >>  					 PM_TAPDELAY_INPUT, itap_delay, NULL);
> >>  	}
> >> @@ -163,7 +163,7 @@ static inline int arasan_zynqmp_set_in_tapdelay(u8 node_id, u32 itap_delay)
> >>  	return 0;
> >>  }
> >>
> >> -static inline int arasan_zynqmp_set_out_tapdelay(u8 node_id, u32
> >> otap_delay)
> >> +static inline int arasan_zynqmp_set_out_tapdelay(u32 node_id, u32
> >> +otap_delay)
> >>  {
> >>  	if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) {
> >>  		if (node_id == NODE_SD_0)
> >> @@ -174,13 +174,13 @@ static inline int arasan_zynqmp_set_out_tapdelay(u8 node_id, u32
> otap_delay)
> >>  		return zynqmp_mmio_write(SD_OTAP_DLY, SD1_OTAPDLYSEL_MASK,
> >>  					 (otap_delay << 16));
> >>  	} else {
> >> -		return xilinx_pm_request(PM_IOCTL, (u32)node_id,
> >> +		return xilinx_pm_request(PM_IOCTL, node_id,
> >>  					 IOCTL_SET_SD_TAPDELAY,
> >>  					 PM_TAPDELAY_OUTPUT, otap_delay, NULL);
> >>  	}
> >>  }
> >>
> >> -static inline int zynqmp_dll_reset(u8 node_id, u32 type)
> >> +static inline int zynqmp_dll_reset(u32 node_id, u32 type)
> >>  {
> >>  	if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) {
> >>  		if (node_id == NODE_SD_0)
> >> @@ -192,12 +192,12 @@ static inline int zynqmp_dll_reset(u8 node_id, u32 type)
> >>  					 type == PM_DLL_RESET_ASSERT ?
> >>  					 SD1_DLL_RST : 0);
> >>  	} else {
> >> -		return xilinx_pm_request(PM_IOCTL, (u32)node_id,
> >> +		return xilinx_pm_request(PM_IOCTL, node_id,
> >>  					 IOCTL_SD_DLL_RESET, type, 0, NULL);
> >>  	}
> >>  }
> >>
> >> -static int arasan_zynqmp_dll_reset(struct sdhci_host *host, u8
> >> node_id)
> >> +static int arasan_zynqmp_dll_reset(struct sdhci_host *host, u32
> >> +node_id)
> >>  {
> >>  	struct mmc *mmc = (struct mmc *)host->mmc;
> >>  	struct udevice *dev = mmc->dev;