[PATCH v6 05/10] arm_ffa: introduce armffa command
Abdellatif El Khlifi
abdellatif.elkhlifi at arm.com
Thu Oct 13 12:38:52 CEST 2022
Provide armffa command showcasing the use of the FF-A driver
The armffa command allows to query secure partitions data from
the secure world and exchanging messages with the partitions.
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
Cc: Tom Rini <trini at konsulko.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Ilias Apalodimas <ilias.apalodimas at linaro.org>
Cc: Jens Wiklander <jens.wiklander at linaro.org>
---
Changelog:
===============
v4:
* remove pattern data in do_ffa_msg_send_direct_req
v3:
* use the new driver interfaces (partition_info_get, sync_send_receive)
in armffa command
v2:
* replace use of ffa_helper_init_device function by
ffa_helper_bus_discover
v1:
* introduce armffa command
MAINTAINERS | 1 +
cmd/Kconfig | 10 ++
cmd/Makefile | 2 +
cmd/armffa.c | 242 +++++++++++++++++++++++++++++++
drivers/firmware/arm-ffa/Kconfig | 1 +
5 files changed, 256 insertions(+)
create mode 100644 cmd/armffa.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 496f47a516..663e2abccd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -251,6 +251,7 @@ F: configs/cortina_presidio-asic-pnand_defconfig
ARM FF-A
M: Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
S: Maintained
+F: cmd/armffa.c
F: doc/arch/arm64.ffa.rst
F: drivers/firmware/arm-ffa/
F: include/arm_ffa.h
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 6f00bd9307..6b1ffee3cf 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -912,6 +912,16 @@ endmenu
menu "Device access commands"
+config CMD_ARMFFA
+ bool "Arm FF-A test command"
+ depends on ARM_FFA_TRANSPORT
+ help
+ Provides a test command for the Arm FF-A driver
+ supported options:
+ - Listing the partition(s) info
+ - Sending a data pattern to the specified partition
+ - Displaying the arm_ffa device info
+
config CMD_ARMFLASH
#depends on FLASH_CFI_DRIVER
bool "armflash"
diff --git a/cmd/Makefile b/cmd/Makefile
index cf6ce1bd6f..7d806817b1 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -12,6 +12,8 @@ obj-y += panic.o
obj-y += version.o
# command
+
+obj-$(CONFIG_CMD_ARMFFA) += armffa.o
obj-$(CONFIG_CMD_ACPI) += acpi.o
obj-$(CONFIG_CMD_ADDRMAP) += addrmap.o
obj-$(CONFIG_CMD_AES) += aes.o
diff --git a/cmd/armffa.c b/cmd/armffa.c
new file mode 100644
index 0000000000..9b56e8a830
--- /dev/null
+++ b/cmd/armffa.c
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2022 ARM Limited
+ * Abdellatif El Khlifi <abdellatif.elkhlifi at arm.com>
+ */
+
+#include <arm_ffa.h>
+#include <asm/io.h>
+#include <common.h>
+#include <command.h>
+#include <dm.h>
+#include <mapmem.h>
+#include <stdlib.h>
+
+/**
+ * do_ffa_get_singular_partition_info - implementation of the getpart subcommand
+ * @cmdtp: Command Table
+ * @flag: flags
+ * @argc: number of arguments
+ * @argv: arguments
+ *
+ * This function queries the secure partition information which the UUID is provided
+ * as an argument. The function uses the arm_ffa driver partition_info_get operation
+ * to retrieve the data.
+ * The input UUID string is expected to be in big endian format.
+ *
+ * Return:
+ *
+ * CMD_RET_SUCCESS: on success, otherwise failure
+ */
+static int do_ffa_get_singular_partition_info(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ u32 count = 0, size = 0;
+ int ret;
+ struct ffa_partition_info *parts_info;
+ u32 info_idx;
+
+ if (argc != 1)
+ return -EINVAL;
+
+ /* Mode 1: getting the number of secure partitions */
+ ret = ffa_bus_ops_get()->partition_info_get(argv[0], &count, NULL);
+ if (ret != 0) {
+ ffa_err("Failure in querying partitions count (error code: %d)", ret);
+ return ret;
+ }
+
+ if (!count) {
+ ffa_info("No secure partition found");
+ return ret;
+ }
+
+ /*
+ * pre-allocate a buffer to be filled by the driver
+ * with ffa_partition_info structs
+ */
+
+ ffa_info("Pre-allocating %d partition(s) info structures", count);
+
+ parts_info = calloc(count, sizeof(struct ffa_partition_info));
+ if (!parts_info)
+ return -EINVAL;
+
+ size = count * sizeof(struct ffa_partition_info);
+
+ /*
+ * ask the driver to fill the buffer with the SPs info
+ */
+
+ ret = ffa_bus_ops_get()->partition_info_get(argv[0], &size, parts_info);
+ if (ret != 0) {
+ ffa_err("Failure in querying partition(s) info (error code: %d)", ret);
+ free(parts_info);
+ return ret;
+ }
+
+ /*
+ * SPs found , show the partition information
+ */
+ for (info_idx = 0; info_idx < count ; info_idx++) {
+ ffa_info("Partition: id = 0x%x , exec_ctxt 0x%x , properties 0x%x",
+ parts_info[info_idx].id,
+ parts_info[info_idx].exec_ctxt,
+ parts_info[info_idx].properties);
+ }
+
+ free(parts_info);
+
+ return 0;
+}
+
+/**
+ * do_ffa_msg_send_direct_req - implementation of the ping subcommand
+ * @cmdtp: Command Table
+ * @flag: flags
+ * @argc: number of arguments
+ * @argv: arguments
+ *
+ * This function sends data to the secure partition which the ID is provided
+ * as an argument. The function uses the arm_ffa driver sync_send_receive operation
+ * to send data.
+ *
+ * Return:
+ *
+ * CMD_RET_SUCCESS: on success, otherwise failure
+ */
+int do_ffa_msg_send_direct_req(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ struct ffa_send_direct_data msg = {
+ .data0 = 0xaaaaaaaa,
+ .data1 = 0xbbbbbbbb,
+ .data2 = 0xcccccccc,
+ .data3 = 0xdddddddd,
+ .data4 = 0xeeeeeeee,
+ };
+ u16 part_id;
+ int ret;
+
+ if (argc != 1)
+ return -EINVAL;
+
+ errno = 0;
+ part_id = strtoul(argv[0], NULL, 16);
+
+ if (errno) {
+ ffa_err("Invalid partition ID");
+ return -EINVAL;
+ }
+
+ ret = ffa_bus_ops_get()->sync_send_receive(part_id, &msg);
+ if (ret == 0) {
+ u8 cnt;
+
+ ffa_info("SP response:\n[LSB]");
+ for (cnt = 0;
+ cnt < sizeof(struct ffa_send_direct_data) / sizeof(u64);
+ cnt++)
+ ffa_info("0x%llx", ((u64 *)&msg)[cnt]);
+ } else {
+ ffa_err("Sending direct request error (%d)", ret);
+ }
+
+ return ret;
+}
+
+/**
+ *do_ffa_dev_list - implementation of the devlist subcommand
+ * @cmdtp: [in] Command Table
+ * @flag: flags
+ * @argc: number of arguments
+ * @argv: arguments
+ *
+ * This function queries the devices belonging to the UCLASS_FFA
+ * class. Currently, one device is expected to show up: the arm_ffa device
+ *
+ * Return:
+ *
+ * CMD_RET_SUCCESS: on success, otherwise failure
+ */
+int do_ffa_dev_list(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+ struct udevice *dev = NULL;
+ int i, ret;
+
+ ffa_info("arm_ffa uclass entries:");
+
+ for (i = 0, ret = uclass_first_device(UCLASS_FFA, &dev);
+ dev;
+ ret = uclass_next_device(&dev), i++) {
+ if (ret)
+ break;
+
+ ffa_info("entry %d - instance %08x, ops %08x, plat %08x",
+ i,
+ (u32)map_to_sysmem(dev),
+ (u32)map_to_sysmem(dev->driver->ops),
+ (u32)map_to_sysmem(dev_get_plat(dev)));
+ }
+
+ return cmd_process_error(cmdtp, ret);
+}
+
+static struct cmd_tbl armffa_commands[] = {
+ U_BOOT_CMD_MKENT(getpart, 1, 1, do_ffa_get_singular_partition_info, "", ""),
+ U_BOOT_CMD_MKENT(ping, 1, 1, do_ffa_msg_send_direct_req, "", ""),
+ U_BOOT_CMD_MKENT(devlist, 0, 1, do_ffa_dev_list, "", ""),
+};
+
+/**
+ * do_armffa - the armffa command main function
+ * @cmdtp: Command Table
+ * @flag: flags
+ * @argc: number of arguments
+ * @argv: arguments
+ *
+ * This function identifies which armffa subcommand to run.
+ * Then, it makes sure the arm_ffa device is probed and
+ * ready for use.
+ * Then, it runs the subcommand.
+ *
+ * Return:
+ *
+ * CMD_RET_SUCCESS: on success, otherwise failure
+ */
+static int do_armffa(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+ struct cmd_tbl *armffa_cmd;
+ int ret;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ armffa_cmd = find_cmd_tbl(argv[1], armffa_commands, ARRAY_SIZE(armffa_commands));
+
+ argc -= 2;
+ argv += 2;
+
+ if (!armffa_cmd || argc > armffa_cmd->maxargs)
+ return CMD_RET_USAGE;
+
+ ret = ffa_bus_discover();
+ if (ret != 0)
+ return cmd_process_error(cmdtp, ret);
+
+ if (!ffa_bus_ops_get())
+ return -EINVAL;
+
+ ret = armffa_cmd->cmd(armffa_cmd, flag, argc, argv);
+
+ return cmd_process_error(armffa_cmd, ret);
+}
+
+U_BOOT_CMD(armffa, 4, 1, do_armffa,
+ "Arm FF-A operations test command",
+ "getpart <partition UUID>\n"
+ " - lists the partition(s) info\n"
+ "ping <partition ID>\n"
+ " - sends a data pattern to the specified partition\n"
+ "devlist\n"
+ " - displays the arm_ffa device info\n");
diff --git a/drivers/firmware/arm-ffa/Kconfig b/drivers/firmware/arm-ffa/Kconfig
index f1427535f9..624e834b1f 100644
--- a/drivers/firmware/arm-ffa/Kconfig
+++ b/drivers/firmware/arm-ffa/Kconfig
@@ -4,6 +4,7 @@ config ARM_FFA_TRANSPORT
bool "Enable Arm Firmware Framework for Armv8-A driver"
depends on DM && ARM64
select ARM_SMCCC
+ select CMD_ARMFFA
select LIB_UUID
select DEVRES
help
--
2.17.1
More information about the U-Boot
mailing list