[PATCH v2 35/45] vbe: Support reading the next SPL phase via VBE
Simon Glass
sjg at chromium.org
Thu Oct 13 14:29:17 CEST 2022
Add an SPL loader to obtain the next-phase binary from a FIT provided
by the VBE driver.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
(no changes since v1)
arch/sandbox/cpu/spl.c | 3 +-
arch/sandbox/include/asm/spl.h | 1 +
boot/Makefile | 1 +
boot/vbe_request.c | 2 +-
boot/vbe_simple.c | 46 +++++---
boot/vbe_simple.h | 37 +++++++
boot/vbe_simple_fw.c | 196 +++++++++++++++++++++++++++++++++
include/bootstage.h | 2 +
8 files changed, 269 insertions(+), 19 deletions(-)
create mode 100644 boot/vbe_simple.h
create mode 100644 boot/vbe_simple_fw.c
diff --git a/arch/sandbox/cpu/spl.c b/arch/sandbox/cpu/spl.c
index 75f4601fdfb..0faf34cc00a 100644
--- a/arch/sandbox/cpu/spl.c
+++ b/arch/sandbox/cpu/spl.c
@@ -51,7 +51,8 @@ void board_init_f(ulong flag)
void board_boot_order(u32 *spl_boot_list)
{
- spl_boot_list[0] = BOOT_DEVICE_BOARD;
+ spl_boot_list[0] = BOOT_DEVICE_VBE;
+ spl_boot_list[1] = BOOT_DEVICE_BOARD;
}
static int spl_board_load_file(struct spl_image_info *spl_image,
diff --git a/arch/sandbox/include/asm/spl.h b/arch/sandbox/include/asm/spl.h
index 312aef72086..2f8b5fcfcfe 100644
--- a/arch/sandbox/include/asm/spl.h
+++ b/arch/sandbox/include/asm/spl.h
@@ -11,6 +11,7 @@ enum {
BOOT_DEVICE_MMC2,
BOOT_DEVICE_MMC2_2,
BOOT_DEVICE_BOARD,
+ BOOT_DEVICE_VBE,
};
/**
diff --git a/boot/Makefile b/boot/Makefile
index 19d628d748a..e5c27900ea7 100644
--- a/boot/Makefile
+++ b/boot/Makefile
@@ -49,3 +49,4 @@ endif
obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_VBE) += vbe.o vbe_request.o
obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_VBE_SIMPLE) += vbe_simple.o
+obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_VBE_SIMPLE_FW) += vbe_simple_fw.o
diff --git a/boot/vbe_request.c b/boot/vbe_request.c
index 01f7a24d316..9fac85fef82 100644
--- a/boot/vbe_request.c
+++ b/boot/vbe_request.c
@@ -36,7 +36,7 @@ static int handle_random_req(ofnode node, int default_size,
u32 size;
int ret;
- if (!IS_ENABLED(CONFIG_DM_RNG))
+ if (!CONFIG_IS_ENABLED(DM_RNG))
return -ENOTSUPP;
if (ofnode_read_u32(node, "vbe,size", &size)) {
diff --git a/boot/vbe_simple.c b/boot/vbe_simple.c
index 076b650c25a..1ccd416e4bb 100644
--- a/boot/vbe_simple.c
+++ b/boot/vbe_simple.c
@@ -9,18 +9,19 @@
#define LOG_CATEGORY LOGC_BOOT
#include <common.h>
-#include <log.h>
-#include <memalign.h>
-#include <part.h>
+#include <bootdev.h>
#include <bootflow.h>
#include <bootmeth.h>
#include <dm.h>
+#include <log.h>
+#include <memalign.h>
#include <mmc.h>
#include <vbe.h>
#include <version_string.h>
#include <dm/device-internal.h>
#include <dm/ofnode.h>
#include <u-boot/crc.h>
+#include "vbe_simple.h"
enum {
MAX_VERSION_LEN = 256,
@@ -37,18 +38,6 @@ enum {
NVD_HDR_VER_CUR = 1, /* current version */
};
-/** struct simple_priv - information read from the device tree */
-struct simple_priv {
- u32 area_start;
- u32 area_size;
- u32 skip_offset;
- u32 state_offset;
- u32 state_size;
- u32 version_offset;
- u32 version_size;
- const char *storage;
-};
-
/** struct simple_state - state information read from media
*
* @fw_version: Firmware version string
@@ -183,15 +172,38 @@ static int vbe_simple_get_state_desc(struct udevice *dev, char *buf,
static int vbe_simple_read_bootflow(struct udevice *dev, struct bootflow *bflow)
{
- /* To be implemented */
+ int ret;
+
+ if (vbe_phase() == VBE_PHASE_FIRMWARE) {
+ ret = vbe_simple_read_bootflow_fw(dev, bflow);
+ if (ret)
+ return log_msg_ret("fw", ret);
+ return 0;
+ }
return -EINVAL;
}
+static int vbe_simple_read_file(struct udevice *dev, struct bootflow *bflow,
+ const char *file_path, ulong addr, ulong *sizep)
+{
+ int ret;
+
+ if (vbe_phase() == VBE_PHASE_OS) {
+ ret = bootmeth_common_read_file(dev, bflow, file_path, addr,
+ sizep);
+ if (ret)
+ return log_msg_ret("os", ret);
+ }
+
+ /* To be implemented */
+ return -EINVAL;
+}
+
static struct bootmeth_ops bootmeth_vbe_simple_ops = {
.get_state_desc = vbe_simple_get_state_desc,
.read_bootflow = vbe_simple_read_bootflow,
- .read_file = bootmeth_common_read_file,
+ .read_file = vbe_simple_read_file,
};
int vbe_simple_fixup_node(ofnode node, struct simple_state *state)
diff --git a/boot/vbe_simple.h b/boot/vbe_simple.h
new file mode 100644
index 00000000000..e37a9fae379
--- /dev/null
+++ b/boot/vbe_simple.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Verified Boot for Embedded (VBE) vbe-simple common file
+ *
+ * Copyright 2022 Google LLC
+ * Written by Simon Glass <sjg at chromium.org>
+ */
+
+#ifndef __VBE_SIMPLE_H
+#define __VBE_SIMPLE_H
+
+/** struct simple_priv - information read from the device tree */
+struct simple_priv {
+ u32 area_start;
+ u32 area_size;
+ u32 skip_offset;
+ u32 state_offset;
+ u32 state_size;
+ u32 version_offset;
+ u32 version_size;
+ const char *storage;
+};
+
+/**
+ * vbe_simple_read_fw_bootflow() - Read a bootflow for firmware
+ *
+ * Locates and loads the firmware image (FIT) needed for the next phase. The FIT
+ * should ideally use external data, to reduce the amount of it that needs to be
+ * read.
+ *
+ * @bdev: bootdev device containing the firmwre
+ * @blow: Place to put the created bootflow, on success
+ * @return 0 if OK, -ve on error
+ */
+int vbe_simple_read_bootflow_fw(struct udevice *dev, struct bootflow *bflow);
+
+#endif /* __VBE_SIMPLE_H */
diff --git a/boot/vbe_simple_fw.c b/boot/vbe_simple_fw.c
new file mode 100644
index 00000000000..fc05e9e2bd1
--- /dev/null
+++ b/boot/vbe_simple_fw.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Verified Boot for Embedded (VBE) loading firmware phases
+ *
+ * Copyright 2022 Google LLC
+ * Written by Simon Glass <sjg at chromium.org>
+ */
+
+#define LOG_CATEGORY LOGC_BOOT
+
+#include <common.h>
+#include <bootdev.h>
+#include <bootflow.h>
+#include <bootmeth.h>
+#include <bootstage.h>
+#include <dm.h>
+#include <image.h>
+#include <log.h>
+#include <mapmem.h>
+#include <memalign.h>
+#include <mmc.h>
+#include <spl.h>
+#include <vbe.h>
+#include <dm/device-internal.h>
+#include "vbe_simple.h"
+
+/**
+ * vbe_simple_read_bootflow_fw() - Create a bootflow for firmware
+ *
+ * Locates and loads the firmware image (FIT) needed for the next phase. The FIT
+ * should ideally use external data, to reduce the amount of it that needs to be
+ * read.
+ *
+ * @bdev: bootdev device containing the firmwre
+ * @meth: VBE simple bootmeth
+ * @blow: Place to put the created bootflow, on success
+ * @return 0 if OK, -ve on error
+ */
+int vbe_simple_read_bootflow_fw(struct udevice *dev, struct bootflow *bflow)
+{
+ ALLOC_CACHE_ALIGN_BUFFER(u8, sbuf, MMC_MAX_BLOCK_LEN);
+ struct udevice *media = dev_get_parent(bflow->dev);
+ struct udevice *meth = bflow->method;
+ struct simple_priv *priv = dev_get_priv(meth);
+ const char *fit_uname, *fit_uname_config;
+ struct bootm_headers images = {};
+ ulong offset, size, blknum, addr, len, load_addr, num_blks;
+ enum image_phase_t phase;
+ struct blk_desc *desc;
+ struct udevice *blk;
+ int node, ret;
+ void *buf;
+
+ log_debug("media=%s\n", media->name);
+ ret = blk_get_from_parent(media, &blk);
+ if (ret)
+ return log_msg_ret("med", ret);
+ log_debug("blk=%s\n", blk->name);
+ desc = dev_get_uclass_plat(blk);
+
+ offset = priv->area_start + priv->skip_offset;
+
+ /* read in one block to find the FIT size */
+ blknum = offset / desc->blksz;
+ log_debug("read at %lx, blknum %lx\n", offset, blknum);
+ ret = blk_read(blk, blknum, 1, sbuf);
+ if (ret < 0)
+ return log_msg_ret("rd", ret);
+
+ ret = fdt_check_header(sbuf);
+ if (ret < 0)
+ return log_msg_ret("fdt", -EINVAL);
+ size = fdt_totalsize(sbuf);
+ if (size > priv->area_size)
+ return log_msg_ret("fdt", -E2BIG);
+ log_debug("FIT size %lx\n", size);
+
+ /*
+ * Load the FIT into the SPL memory. This is typically a FIT with
+ * external data, so this is quite small, perhaps a few KB.
+ */
+ addr = CONFIG_VAL(TEXT_BASE);
+ buf = map_sysmem(addr, size);
+ num_blks = DIV_ROUND_UP(size, desc->blksz);
+ log_debug("read %lx, %lx blocks to %lx / %p\n", size, num_blks, addr,
+ buf);
+ ret = blk_read(blk, blknum, num_blks, buf);
+ if (ret < 0)
+ return log_msg_ret("rd", ret);
+
+ /* figure out the phase to load */
+ phase = IS_ENABLED(CONFIG_VPL_BUILD) ? IH_PHASE_SPL : IH_PHASE_U_BOOT;
+
+ /*
+ * Load the image from the FIT. We ignore any load-address information
+ * so in practice this simply locates the image in the external-data
+ * region and returns its address and size. Since we only loaded the FIT
+ * itself, only a part of the image will be present, at best.
+ */
+ fit_uname = NULL;
+ fit_uname_config = NULL;
+ log_debug("loading FIT\n");
+ ret = fit_image_load(&images, addr, &fit_uname, &fit_uname_config,
+ IH_ARCH_SANDBOX, image_ph(phase, IH_TYPE_FIRMWARE),
+ BOOTSTAGE_ID_FIT_SPL_START, FIT_LOAD_IGNORED,
+ &load_addr, &len);
+ if (ret < 0)
+ return log_msg_ret("ld", ret);
+ node = ret;
+ log_debug("loaded to %lx\n", load_addr);
+
+ /* For FIT external data, read in the external data */
+ if (load_addr + len > addr + size) {
+ ulong base, full_size;
+ void *base_buf;
+
+ /* Find the start address to load from */
+ base = ALIGN_DOWN(load_addr, desc->blksz);
+
+ /*
+ * Get the total number of bytes to load, taking care of
+ * block alignment
+ */
+ full_size = load_addr + len - base;
+
+ /*
+ * Get the start block number, number of blocks and the address
+ * to load to, then load the blocks
+ */
+ blknum = (offset + base - addr) / desc->blksz;
+ num_blks = DIV_ROUND_UP(full_size, desc->blksz);
+ base_buf = map_sysmem(base, full_size);
+ ret = blk_read(blk, blknum, num_blks, base_buf);
+ log_debug("read %lx %lx, %lx blocks to %lx / %p: ret=%d\n",
+ blknum, full_size, num_blks, base, base_buf, ret);
+ if (ret < 0)
+ return log_msg_ret("rd", ret);
+ }
+
+ /* set up the bootflow with the info we obtained */
+ bflow->name = strdup(fdt_get_name(buf, node, NULL));
+ if (!bflow->name)
+ return log_msg_ret("name", -ENOMEM);
+ bflow->blk = blk;
+ bflow->buf = map_sysmem(load_addr, len);
+ bflow->size = len;
+
+ return 0;
+}
+
+static int simple_load_from_image(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev)
+{
+ struct udevice *meth, *bdev;
+ struct simple_priv *priv;
+ struct bootflow bflow;
+ int ret;
+
+ if (spl_phase() != PHASE_VPL && spl_phase() != PHASE_SPL)
+ return -ENOENT;
+
+ vbe_find_first_device(&meth);
+ if (!meth)
+ return log_msg_ret("vd", -ENODEV);
+ log_debug("vbe dev %s\n", meth->name);
+ ret = device_probe(meth);
+ if (ret)
+ return log_msg_ret("probe", ret);
+
+ priv = dev_get_priv(meth);
+ log_debug("simple %s\n", priv->storage);
+ ret = bootdev_find_by_label(priv->storage, &bdev);
+ if (ret)
+ return log_msg_ret("bd", ret);
+ log_debug("bootdev %s\n", bdev->name);
+
+ bootflow_init(&bflow, bdev, meth);
+ ret = bootmeth_read_bootflow(meth, &bflow);
+ log_debug("\nfw ret=%d\n", ret);
+ if (ret)
+ return log_msg_ret("rd", ret);
+
+ /* jump to the image */
+ spl_image->flags = SPL_SANDBOXF_ARG_IS_BUF;
+ spl_image->arg = bflow.buf;
+ spl_image->size = bflow.size;
+ log_debug("Image: %s at %p size %x\n", bflow.name, bflow.buf,
+ bflow.size);
+
+ /* this is not used from now on, so free it */
+ bootflow_free(&bflow);
+
+ return 0;
+}
+SPL_LOAD_IMAGE_METHOD("vbe_simple", 5, BOOT_DEVICE_VBE,
+ simple_load_from_image);
diff --git a/include/bootstage.h b/include/bootstage.h
index 7088d0b875e..685939ccffc 100644
--- a/include/bootstage.h
+++ b/include/bootstage.h
@@ -166,6 +166,8 @@ enum bootstage_id {
BOOTSTAGE_ID_NAND_FIT_READ_OK,
BOOTSTAGE_ID_FIT_LOADABLE_START = 160, /* for Loadable Images */
+
+ BOOTSTAGE_ID_FIT_SPL_START = 170, /* for SPL Images */
/*
* These boot stages are new, higher level, and not directly related
* to the old boot progress numbers. They are useful for recording
--
2.38.0.rc1.362.ged0d419d3c-goog
More information about the U-Boot
mailing list