[PATCH v13 02/15] FWU: Add FWU metadata structure and driver for accessing metadata
Ilias Apalodimas
ilias.apalodimas at linaro.org
Fri Oct 14 08:06:20 CEST 2022
Hi Sughosh
On Thu, Oct 06, 2022 at 02:36:16PM +0530, Sughosh Ganu wrote:
> In the FWU Multi Bank Update feature, the information about the
> updatable images is stored as part of the metadata, which is stored on
> a dedicated partition. Add the metadata structure, and a driver model
> uclass which provides functions to access the metadata. These are
> generic API's, and implementations can be added based on parameters
> like how the metadata partition is accessed and what type of storage
> device houses the metadata.
>
> Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
> Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> Reviewed-by: Etienne Carriere <etienne.carriere at linaro.org>
> ---
> Changes since V12: None
>
> drivers/fwu-mdata/fwu-mdata-uclass.c | 107 ++++++++
> include/dm/uclass-id.h | 1 +
> include/fwu.h | 211 ++++++++++++++++
> include/fwu_mdata.h | 67 +++++
> lib/fwu_updates/fwu.c | 364 +++++++++++++++++++++++++++
> 5 files changed, 750 insertions(+)
> create mode 100644 drivers/fwu-mdata/fwu-mdata-uclass.c
> create mode 100644 include/fwu.h
> create mode 100644 include/fwu_mdata.h
> create mode 100644 lib/fwu_updates/fwu.c
>
> diff --git a/drivers/fwu-mdata/fwu-mdata-uclass.c b/drivers/fwu-mdata/fwu-mdata-uclass.c
> new file mode 100644
> index 0000000000..4237b89520
> --- /dev/null
> +++ b/drivers/fwu-mdata/fwu-mdata-uclass.c
> @@ -0,0 +1,107 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2022, Linaro Limited
> + */
> +
> +#define LOG_CATEGORY UCLASS_FWU_MDATA
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <efi_loader.h>
> +#include <fwu.h>
> +#include <fwu_mdata.h>
> +#include <log.h>
> +
> +#include <linux/errno.h>
> +#include <linux/types.h>
> +#include <u-boot/crc.h>
> +
> +/**
> + * fwu_mdata_check() - Check if the FWU metadata is valid
> + * @dev: FWU metadata device
> + *
> + * Validate both copies of the FWU metadata. If one of the copies
> + * has gone bad, restore it from the other copy.
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_mdata_check(struct udevice *dev)
> +{
> + const struct fwu_mdata_ops *ops = device_get_ops(dev);
> +
> + if (!ops->check_mdata) {
> + log_debug("check_mdata() method not defined\n");
> + return -ENOSYS;
> + }
> +
> + return ops->check_mdata(dev);
> +}
> +
> +/**
> + * fwu_get_mdata() - Get a FWU metadata copy
> + * @dev: FWU metadata device
> + * @mdata: Copy of the FWU metadata
> + *
> + * Get a valid copy of the FWU metadata.
> + *
> + * Note: This function is to be called first when modifying any fields
> + * in the metadata. The sequence of calls to modify any field in the
> + * metadata would be 1) fwu_get_mdata 2) Modify metadata, followed by
> + * 3) fwu_update_mdata
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_get_mdata(struct udevice *dev, struct fwu_mdata *mdata)
> +{
> + const struct fwu_mdata_ops *ops = device_get_ops(dev);
> +
> + if (!ops->get_mdata) {
> + log_debug("get_mdata() method not defined\n");
> + return -ENOSYS;
> + }
> +
> + return ops->get_mdata(dev, mdata);
> +}
> +
> +/**
> + * fwu_update_mdata() - Update the FWU metadata
> + * @dev: FWU metadata device
> + * @mdata: Copy of the FWU metadata
> + *
> + * Update the FWU metadata structure by writing to the
> + * FWU metadata partitions.
> + *
> + * Note: This function is not to be called directly to update the
> + * metadata fields. The sequence of function calls should be
> + * 1) fwu_get_mdata() 2) Modify the medata fields 3) fwu_update_mdata()
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_update_mdata(struct udevice *dev, struct fwu_mdata *mdata)
> +{
> + void *buf;
> + const struct fwu_mdata_ops *ops = device_get_ops(dev);
> +
> + if (!ops->update_mdata) {
> + log_debug("get_mdata() method not defined\n");
> + return -ENOSYS;
> + }
> +
> + /*
> + * Calculate the crc32 for the updated FWU metadata
> + * and put the updated value in the FWU metadata crc32
> + * field
> + */
> + buf = &mdata->version;
> + mdata->crc32 = crc32(0, buf, sizeof(*mdata) - sizeof(u32));
> +
> + return ops->update_mdata(dev, mdata);
> +}
> +
> +UCLASS_DRIVER(fwu_mdata) = {
> + .id = UCLASS_FWU_MDATA,
> + .name = "fwu-mdata",
> +};
> diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
> index a432e43871..598a8c10a0 100644
> --- a/include/dm/uclass-id.h
> +++ b/include/dm/uclass-id.h
> @@ -58,6 +58,7 @@ enum uclass_id {
> UCLASS_FIRMWARE, /* Firmware */
> UCLASS_FUZZING_ENGINE, /* Fuzzing engine */
> UCLASS_FS_FIRMWARE_LOADER, /* Generic loader */
> + UCLASS_FWU_MDATA, /* FWU Metadata Access */
> UCLASS_GPIO, /* Bank of general-purpose I/O pins */
> UCLASS_HASH, /* Hash device */
> UCLASS_HWSPINLOCK, /* Hardware semaphores */
> diff --git a/include/fwu.h b/include/fwu.h
> new file mode 100644
> index 0000000000..a4d2d35d9a
> --- /dev/null
> +++ b/include/fwu.h
> @@ -0,0 +1,211 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright (c) 2022, Linaro Limited
> + */
> +
> +#if !defined _FWU_H_
> +#define _FWU_H_
> +
> +#include <blk.h>
> +#include <efi.h>
> +
> +#include <linux/types.h>
> +
> +struct fwu_mdata;
> +struct udevice;
> +
> +/**
> + * @mdata_check: check the validity of the FWU metadata partitions
> + * @get_mdata() - Get a FWU metadata copy
> + * @update_mdata() - Update the FWU metadata copy
> + */
> +struct fwu_mdata_ops {
> + /**
> + * check_mdata() - Check if the FWU metadata is valid
> + * @dev: FWU device
> + *
> + * Validate both copies of the FWU metadata. If one of the copies
> + * has gone bad, restore it from the other copy.
> + *
> + * Return: 0 if OK, -ve on error
> + */
> + int (*check_mdata)(struct udevice *dev);
> +
> + /**
> + * get_mdata() - Get a FWU metadata copy
> + * @dev: FWU device
> + * @mdata: Pointer to FWU metadata
> + *
> + * Get a valid copy of the FWU metadata.
> + *
> + * Return: 0 if OK, -ve on error
> + */
> + int (*get_mdata)(struct udevice *dev, struct fwu_mdata *mdata);
> +
> + /**
> + * update_mdata() - Update the FWU metadata
> + * @dev: FWU device
> + * @mdata: Copy of the FWU metadata
> + *
> + * Update the FWU metadata structure by writing to the
> + * FWU metadata partitions.
> + *
> + * Return: 0 if OK, -ve on error
> + */
> + int (*update_mdata)(struct udevice *dev, struct fwu_mdata *mdata);
> +};
> +
> +#define FWU_MDATA_VERSION 0x1
> +
> +/*
> +* GUID value defined in the FWU specification for identification
> +* of the FWU metadata partition.
> +*/
> +#define FWU_MDATA_GUID \
> + EFI_GUID(0x8a7a84a0, 0x8387, 0x40f6, 0xab, 0x41, \
> + 0xa8, 0xb9, 0xa5, 0xa6, 0x0d, 0x23)
> +
> +/**
> + * fwu_get_mdata() - Get a FWU metadata copy
> + * @dev: FWU metadata device
> + * @mdata: Copy of the FWU metadata
> + *
> + * Get a valid copy of the FWU metadata.
> + *
> + * Note: This function is to be called first when modifying any fields
> + * in the metadata. The sequence of calls to modify any field in the
> + * metadata would be 1) fwu_get_mdata 2) Modify metadata, followed by
> + * 3) fwu_update_mdata
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_get_mdata(struct udevice *dev, struct fwu_mdata *mdata);
> +
> +/**
> + * fwu_update_mdata() - Update the FWU metadata
> + * @dev: FWU metadata device
> + * @mdata: Copy of the FWU metadata
> + *
> + * Update the FWU metadata structure by writing to the
> + * FWU metadata partitions.
> + *
> + * Note: This function is not to be called directly to update the
> + * metadata fields. The sequence of function calls should be
> + * 1) fwu_get_mdata() 2) Modify the medata fields 3) fwu_update_mdata()
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_update_mdata(struct udevice *dev, struct fwu_mdata *mdata);
> +
> +/**
> + * fwu_get_active_index() - Get active_index from the FWU metadata
> + * @active_idxp: active_index value to be read
> + *
> + * Read the active_index field from the FWU metadata and place it in
> + * the variable pointed to be the function argument.
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_get_active_index(uint *active_idxp);
> +
> +/**
> + * fwu_set_active_index() - Set active_index in the FWU metadata
> + * @active_idx: active_index value to be set
> + *
> + * Update the active_index field in the FWU metadata
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_set_active_index(uint active_idx);
> +
> +/**
> + * fwu_get_image_index() - Get the Image Index to be used for capsule update
> + * @image_index: The Image Index for the image
> + *
> + * The FWU multi bank update feature computes the value of image_index at
> + * runtime, based on the bank to which the image needs to be written to.
> + * Derive the image_index value for the image.
> + *
> + * Currently, the capsule update driver uses the DFU framework for
> + * the updates. This function gets the DFU alt number which is to
> + * be used as the Image Index
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_get_image_index(u8 *image_index);
> +
> +/**
> + * fwu_mdata_check() - Check if the FWU metadata is valid
> + * @dev: FWU metadata device
> + *
> + * Validate both copies of the FWU metadata. If one of the copies
> + * has gone bad, restore it from the other copy.
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_mdata_check(struct udevice *dev);
> +
> +/**
> + * fwu_revert_boot_index() - Revert the active index in the FWU metadata
> + *
> + * Revert the active_index value in the FWU metadata, by swapping the values
> + * of active_index and previous_active_index in both copies of the
> + * FWU metadata.
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_revert_boot_index(void);
> +
> +/**
> + * fwu_verify_mdata() - Verify the FWU metadata
> + * @mdata: FWU metadata structure
> + * @pri_part: FWU metadata partition is primary or secondary
> + *
> + * Verify the FWU metadata by computing the CRC32 for the metadata
> + * structure and comparing it against the CRC32 value stored as part
> + * of the structure.
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_verify_mdata(struct fwu_mdata *mdata, bool pri_part);
> +
> +/**
> + * fwu_accept_image() - Set the Acceptance bit for the image
> + * @img_type_id: GUID of the image type for which the accepted bit is to be
> + * cleared
> + * @bank: Bank of which the image's Accept bit is to be set
> + *
> + * Set the accepted bit for the image specified by the img_guid parameter. This
> + * indicates acceptance of image for subsequent boots by some governing component
> + * like OS(or firmware).
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_accept_image(efi_guid_t *img_type_id, u32 bank);
> +
> +/**
> + * fwu_clear_accept_image() - Clear the Acceptance bit for the image
> + * @img_type_id: GUID of the image type for which the accepted bit is to be
> + * cleared
> + * @bank: Bank of which the image's Accept bit is to be cleared
> + *
> + * Clear the accepted bit for the image type specified by the img_type_id parameter.
> + * This function is called after the image has been updated. The accepted bit is
> + * cleared to be set subsequently after passing the image acceptance criteria, by
> + * either the OS(or firmware)
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_clear_accept_image(efi_guid_t *img_type_id, u32 bank);
> +
> +#endif /* _FWU_H_ */
> diff --git a/include/fwu_mdata.h b/include/fwu_mdata.h
> new file mode 100644
> index 0000000000..8fda4f4ac2
> --- /dev/null
> +++ b/include/fwu_mdata.h
> @@ -0,0 +1,67 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright (c) 2022, Linaro Limited
> + */
> +
> +#if !defined _FWU_MDATA_H_
> +#define _FWU_MDATA_H_
> +
> +#include <efi.h>
> +
> +/**
> + * struct fwu_image_bank_info - firmware image information
> + * @image_uuid: Guid value of the image in this bank
> + * @accepted: Acceptance status of the image
> + * @reserved: Reserved
> + *
> + * The structure contains image specific fields which are
> + * used to identify the image and to specify the image's
> + * acceptance status
> + */
> +struct fwu_image_bank_info {
> + efi_guid_t image_uuid;
> + uint32_t accepted;
> + uint32_t reserved;
> +};
> +
> +/**
> + * struct fwu_image_entry - information for a particular type of image
> + * @image_type_uuid: Guid value for identifying the image type
> + * @location_uuid: Guid of the storage volume where the image is located
> + * @img_bank_info: Array containing properties of images
> + *
> + * This structure contains information on various types of updatable
> + * firmware images. Each image type then contains an array of image
> + * information per bank.
> + */
> +struct fwu_image_entry {
> + efi_guid_t image_type_uuid;
> + efi_guid_t location_uuid;
> + struct fwu_image_bank_info img_bank_info[CONFIG_FWU_NUM_BANKS];
> +};
> +
> +/**
> + * struct fwu_mdata - FWU metadata structure for multi-bank updates
> + * @crc32: crc32 value for the FWU metadata
> + * @version: FWU metadata version
> + * @active_index: Index of the bank currently used for booting images
> + * @previous_active_inde: Index of the bank used before the current bank
> + * being used for booting
> + * @img_entry: Array of information on various firmware images that can
> + * be updated
> + *
> + * This structure is used to store all the needed information for performing
> + * multi bank updates on the platform. This contains info on the bank being
> + * used to boot along with the information needed for identification of
> + * individual images
> + */
> +struct fwu_mdata {
> + uint32_t crc32;
> + uint32_t version;
> + uint32_t active_index;
> + uint32_t previous_active_index;
> +
> + struct fwu_image_entry img_entry[CONFIG_FWU_NUM_IMAGES_PER_BANK];
> +};
> +
> +#endif /* _FWU_MDATA_H_ */
> diff --git a/lib/fwu_updates/fwu.c b/lib/fwu_updates/fwu.c
> new file mode 100644
> index 0000000000..439f66aee4
> --- /dev/null
> +++ b/lib/fwu_updates/fwu.c
> @@ -0,0 +1,364 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2022, Linaro Limited
> + */
> +
> +#include <dm.h>
> +#include <efi_loader.h>
> +#include <fwu.h>
> +#include <fwu_mdata.h>
> +#include <log.h>
> +
> +#include <linux/errno.h>
> +#include <linux/types.h>
> +#include <u-boot/crc.h>
> +
> +enum {
> + IMAGE_ACCEPT_SET = 1,
> + IMAGE_ACCEPT_CLEAR,
> +};
> +
> +static int fwu_get_dev_mdata(struct udevice **dev, struct fwu_mdata *mdata)
> +{
> + int ret;
> +
> + ret = uclass_first_device_err(UCLASS_FWU_MDATA, dev);
> + if (ret) {
> + log_debug("Cannot find fwu device\n");
> + return ret;
> + }
> +
> + ret = fwu_get_mdata(*dev, mdata);
> + if (ret < 0)
> + log_debug("Unable to get valid FWU metadata\n");
> +
> + return ret;
> +}
> +
> +static int fwu_get_image_type_id(u8 *image_index, efi_guid_t *image_type_id)
> +{
> + u8 index;
> + int i;
> + struct efi_fw_image *image;
> +
> + index = *image_index;
> + image = update_info.images;
> + for (i = 0; i < num_image_type_guids; i++) {
> + if (index == image[i].image_index) {
> + guidcpy(image_type_id, &image[i].image_type_id);
> + return 0;
> + }
> + }
> +
> + return -ENOENT;
> +}
> +
> +/**
> + * fwu_verify_mdata() - Verify the FWU metadata
> + * @mdata: FWU metadata structure
> + * @pri_part: FWU metadata partition is primary or secondary
> + *
> + * Verify the FWU metadata by computing the CRC32 for the metadata
> + * structure and comparing it against the CRC32 value stored as part
> + * of the structure.
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_verify_mdata(struct fwu_mdata *mdata, bool pri_part)
> +{
> + u32 calc_crc32;
> + void *buf;
> +
> + buf = &mdata->version;
> + calc_crc32 = crc32(0, buf, sizeof(*mdata) - sizeof(u32));
> +
> + if (calc_crc32 != mdata->crc32) {
> + log_debug("crc32 check failed for %s FWU metadata partition\n",
> + pri_part ? "primary" : "secondary");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * fwu_get_active_index() - Get active_index from the FWU metadata
> + * @active_idx: active_index value to be read
> + *
> + * Read the active_index field from the FWU metadata and place it in
> + * the variable pointed to be the function argument.
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_get_active_index(uint *active_idx)
> +{
> + int ret;
> + struct udevice *dev;
> + struct fwu_mdata mdata = { 0 };
> +
> + ret = fwu_get_dev_mdata(&dev, &mdata);
> + if (ret)
> + return ret;
> +
> + /*
> + * Found the FWU metadata partition, now read the active_index
> + * value
> + */
> + *active_idx = mdata.active_index;
> + if (*active_idx >= CONFIG_FWU_NUM_BANKS) {
> + log_debug("Active index value read is incorrect\n");
> + ret = -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +/**
> + * fwu_set_active_index() - Set active_index in the FWU metadata
> + * @active_idx: active_index value to be set
> + *
> + * Update the active_index field in the FWU metadata
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_set_active_index(uint active_idx)
> +{
> + int ret;
> + struct udevice *dev;
> + struct fwu_mdata mdata = { 0 };
> +
> + if (active_idx >= CONFIG_FWU_NUM_BANKS) {
> + log_debug("Invalid active index value\n");
> + return -EINVAL;
> + }
> +
> + ret = fwu_get_dev_mdata(&dev, &mdata);
> + if (ret)
> + return ret;
> +
> + /*
> + * Update the active index and previous_active_index fields
> + * in the FWU metadata
> + */
> + mdata.previous_active_index = mdata.active_index;
> + mdata.active_index = active_idx;
> +
> + /*
> + * Now write this updated FWU metadata to both the
> + * FWU metadata partitions
> + */
> + ret = fwu_update_mdata(dev, &mdata);
> + if (ret) {
> + log_debug("Failed to update FWU metadata partitions\n");
> + ret = -EIO;
> + }
> +
> + return ret;
> +}
> +
> +/**
> + * fwu_get_image_index() - Get the Image Index to be used for capsule update
> + * @image_index: The Image Index for the image
> + *
> + * The FWU multi bank update feature computes the value of image_index at
> + * runtime, based on the bank to which the image needs to be written to.
> + * Derive the image_index value for the image.
> + *
> + * Currently, the capsule update driver uses the DFU framework for
> + * the updates. This function gets the DFU alt number which is to
> + * be used as the Image Index
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_get_image_index(u8 *image_index)
> +{
> + int ret, i;
> + u8 alt_num;
> + u32 update_bank;
> + efi_guid_t *image_guid, image_type_id;
> + struct udevice *dev;
> + struct fwu_mdata mdata = { 0 };
> + struct fwu_image_entry *img_entry;
> + struct fwu_image_bank_info *img_bank_info;
> +
> + ret = fwu_get_dev_mdata(&dev, &mdata);
> + if (ret)
> + return ret;
> +
> + ret = fwu_plat_get_update_index(&update_bank);
> + if (ret) {
> + log_debug("Failed to get the FWU update bank\n");
> + goto out;
> + }
> +
> + ret = fwu_get_image_type_id(image_index, &image_type_id);
> + if (ret) {
> + log_debug("Unable to get image_type_id for image_index %u\n",
> + *image_index);
> + goto out;
> + }
> +
> + ret = -EINVAL;
> + /*
> + * The FWU metadata has been read. Now get the image_uuid for the
> + * image with the update_bank.
> + */
> + for (i = 0; i < CONFIG_FWU_NUM_IMAGES_PER_BANK; i++) {
> + if (!guidcmp(&image_type_id,
> + &mdata.img_entry[i].image_type_uuid)) {
> + img_entry = &mdata.img_entry[i];
> + img_bank_info = &img_entry->img_bank_info[update_bank];
> + image_guid = &img_bank_info->image_uuid;
> + ret = fwu_plat_get_alt_num(dev, image_guid, &alt_num);
> + if (ret) {
> + log_debug("alt_num not found for partition with GUID %pUs\n",
> + image_guid);
> + } else {
> + log_debug("alt_num %d for partition %pUs\n",
> + alt_num, image_guid);
> + *image_index = alt_num + 1;
> + }
> +
> + goto out;
> + }
> + }
> +
> + log_debug("Partition with the image type %pUs not found\n",
> + &image_type_id);
> +
> +out:
> + return ret;
> +}
> +
> +/**
> + * fwu_revert_boot_index() - Revert the active index in the FWU metadata
> + *
> + * Revert the active_index value in the FWU metadata, by swapping the values
> + * of active_index and previous_active_index in both copies of the
> + * FWU metadata.
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_revert_boot_index(void)
> +{
> + int ret;
> + u32 cur_active_index;
> + struct udevice *dev;
> + struct fwu_mdata mdata = { 0 };
> +
> + ret = fwu_get_dev_mdata(&dev, &mdata);
> + if (ret)
> + return ret;
> +
> + /*
> + * Swap the active index and previous_active_index fields
> + * in the FWU metadata
> + */
> + cur_active_index = mdata.active_index;
> + mdata.active_index = mdata.previous_active_index;
> + mdata.previous_active_index = cur_active_index;
> +
> + /*
> + * Now write this updated FWU metadata to both the
> + * FWU metadata partitions
> + */
> + ret = fwu_update_mdata(dev, &mdata);
> + if (ret) {
> + log_debug("Failed to update FWU metadata partitions\n");
> + ret = -EIO;
> + }
> +
> + return ret;
> +}
> +
> +/**
> + * fwu_clrset_image_accept() - Set or Clear the Acceptance bit for the image
> + * @img_type_id: GUID of the image type for which the accepted bit is to be
> + * set or cleared
> + * @bank: Bank of which the image's Accept bit is to be set or cleared
> + * @action: Action which specifies whether image's Accept bit is to be set or
> + * cleared
> + *
> + * Set/Clear the accepted bit for the image specified by the img_guid parameter.
> + * This indicates acceptance or rejection of image for subsequent boots by some
> + * governing component like OS(or firmware).
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +static int fwu_clrset_image_accept(efi_guid_t *img_type_id, u32 bank, u8 action)
> +{
> + int ret, i;
> + struct udevice *dev;
> + struct fwu_mdata mdata = { 0 };
> + struct fwu_image_entry *img_entry;
> + struct fwu_image_bank_info *img_bank_info;
> +
> + ret = fwu_get_dev_mdata(&dev, &mdata);
> + if (ret)
> + return ret;
> +
> + img_entry = &mdata.img_entry[0];
> + for (i = 0; i < CONFIG_FWU_NUM_IMAGES_PER_BANK; i++) {
> + if (!guidcmp(&img_entry[i].image_type_uuid, img_type_id)) {
> + img_bank_info = &img_entry[i].img_bank_info[bank];
> + if (action == IMAGE_ACCEPT_SET)
> + img_bank_info->accepted |= FWU_IMAGE_ACCEPTED;
> + else
> + img_bank_info->accepted = 0;
> +
> + ret = fwu_update_mdata(dev, &mdata);
> + goto out;
> + }
> + }
> +
> + /* Image not found */
> + ret = -ENOENT;
> +
> +out:
> + return ret;
> +}
> +
> +/**
> + * fwu_accept_image() - Set the Acceptance bit for the image
> + * @img_type_id: GUID of the image type for which the accepted bit is to be
> + * cleared
> + * @bank: Bank of which the image's Accept bit is to be set
> + *
> + * Set the accepted bit for the image specified by the img_guid parameter. This
> + * indicates acceptance of image for subsequent boots by some governing component
> + * like OS(or firmware).
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_accept_image(efi_guid_t *img_type_id, u32 bank)
> +{
> + return fwu_clrset_image_accept(img_type_id, bank,
> + IMAGE_ACCEPT_SET);
> +}
> +
> +/**
> + * fwu_clear_accept_image() - Clear the Acceptance bit for the image
> + * @img_type_id: GUID of the image type for which the accepted bit is to be
> + * cleared
> + * @bank: Bank of which the image's Accept bit is to be cleared
> + *
> + * Clear the accepted bit for the image type specified by the img_type_id parameter.
> + * This function is called after the image has been updated. The accepted bit is
> + * cleared to be set subsequently after passing the image acceptance criteria, by
> + * either the OS(or firmware)
> + *
> + * Return: 0 if OK, -ve on error
> + *
> + */
> +int fwu_clear_accept_image(efi_guid_t *img_type_id, u32 bank)
> +{
> + return fwu_clrset_image_accept(img_type_id, bank,
> + IMAGE_ACCEPT_CLEAR);
> +}
> --
> 2.34.1
>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>
More information about the U-Boot
mailing list