[EXT] [REGRESSION]: v2022.07: SHA256 hash is broken on imx8m series with CAAM enabled

[ZHIZHIKIN Andrey]

Hello Fabio,

> -----Original Message-----
> From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Fabio Estevam
> Sent: Friday, October 14, 2022 9:38 PM
> To: ZHIZHIKIN Andrey <andrey.zhizhikin at leica-geosystems.com>
> Cc: Rasmus Villemoes <rasmus.villemoes at prevas.dk>; Peng Fan
> <peng.fan at oss.nxp.com>; Gaurav Jain <gaurav.jain at nxp.com>; u-boot at lists.denx.de;
> festevam at denx.de; sbabic at denx.de; Michael Walle <michael at walle.cc>; Tommaso
> Merciai <tommaso.merciai at amarulasolutions.com>; Michael Trimarchi
> <michael at amarulasolutions.com>; Marek Vasut <marex at denx.de>; Simon Glass
> <sjg at chromium.org>; Patrick Delaunay <patrick.delaunay at foss.st.com>; Stefan Roese
> <sr at denx.de>; Horia Geanta <horia.geanta at nxp.com>; Pankaj Gupta
> <pankaj.gupta at nxp.com>; Varun Sethi <V.Sethi at nxp.com>; Ye Li <ye.li at nxp.com>; dl-
> uboot-imx <uboot-imx at nxp.com>; trini <trini at konsulko.com>
> Subject: Re: [EXT] [REGRESSION]: v2022.07: SHA256 hash is broken on imx8m series
> with CAAM enabled
> 
> Hi Andrey,
> 
> On Fri, Oct 14, 2022 at 3:53 PM ZHIZHIKIN Andrey
> <andrey.zhizhikin at leica-geosystems.com> wrote:
> 
> > `imx8mp.dtsi` however was not sync'd in, so the JR0 disabling is left out. :(
> > This does explain why the SHA calculation are not operable for that SoC.
> 
> Marcel has submitted the dts sync patch:
> https://lists.denx.de/pipermail/u-boot/2022-August/492834.html

Yes, but this was not picked up... At least, I do not see it applied on the master.

From the entire series [1], the patch that shall solve the issue is [2], and it is
the one I do not see applied onto master.

Regards,
Andrey

Link: [1]: https://lore.kernel.org/u-boot/20220826183141.789236-1-marcel@ziswiler.com/
Link: [2]: https://lore.kernel.org/u-boot/20220826183141.789236-7-marcel@ziswiler.com/