[PATCH v2 07/12] rockchip: puma-rk3399: load environment from same medium as one used to load U-Boot proper

Kever Yang kever.yang at rock-chips.com
Mon Oct 17 15:12:55 CEST 2022


On 2022/9/15 17:14, Quentin Schulz wrote:
> From: Quentin Schulz <quentin.schulz at theobroma-systems.com>
>
> Chances are when one boots U-Boot proper from a given storage medium,
> they want the same medium to be used to load and store the environment.
>
> This basically allows to have completely separate U-Boot (TPL/SPL/U-Boot
> proper/environment) per storage medium which is convenient when working
> with recovery from SD-Card as one would just need to insert a properly
> configured SD-Card into the device to have access to their whole debug
> setup.
>
> No fallback mechanism is provided as to not dirty other storage medium
> environment by mistake. However, since arch_env_get_location() is called
> by env_init() which is part of the pre-relocation process, a valid,
> non-ENVL_UNKNOWN, value shall be returned otherwise the relocation fails
> with the following message:
> initcall sequence 00000000002866c0 failed at call 0000000000256b34 (err=-19)
>
> This valid, non-ENVL_UNKNOWN, value is ENVL_NOWHERE which requires to
> always select CONFIG_ENV_IS_NOWHERE otherwise this work-around does not
> work.
>
> Cc: Quentin Schulz <foss+uboot at 0leil.net>
> Signed-off-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   .../puma_rk3399/puma-rk3399.c                 | 37 +++++++++++++++++++
>   configs/puma-rk3399_defconfig                 |  1 +
>   2 files changed, 38 insertions(+)
>
> diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
> index 5e5e58c88e..7ef4bac24b 100644
> --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c
> +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
> @@ -6,6 +6,7 @@
>   #include <common.h>
>   #include <dm.h>
>   #include <env.h>
> +#include <env_internal.h>
>   #include <init.h>
>   #include <log.h>
>   #include <misc.h>
> @@ -135,6 +136,42 @@ int mmc_get_env_dev(void)
>   	return CONFIG_SYS_MMC_ENV_DEV;
>   }
>   
> +#if !IS_ENABLED(CONFIG_ENV_IS_NOWHERE)
> +#error Please enable CONFIG_ENV_IS_NOWHERE
> +#endif
> +
> +enum env_location arch_env_get_location(enum env_operation op, int prio)
> +{
> +	const char *boot_device =
> +		ofnode_read_chosen_string("u-boot,spl-boot-device");
> +
> +	if (prio > 0)
> +		return ENVL_UNKNOWN;
> +
> +	if (!boot_device) {
> +		debug("%s: /chosen/u-boot,spl-boot-device not set\n",
> +		      __func__);
> +		return ENVL_NOWHERE;
> +	}
> +
> +	debug("%s: booted from %s\n", __func__, boot_device);
> +
> +	if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH) &&
> +	    !strcmp(boot_device, "/spi at ff1d0000/flash at 0"))
> +		return ENVL_SPI_FLASH;
> +
> +	if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC) &&
> +	    (!strcmp(boot_device, "/mmc at fe320000") ||
> +	     !strcmp(boot_device, "/mmc at fe330000")))
> +		return ENVL_MMC;
> +
> +	printf("%s: No environment available: booted from %s but U-Boot "
> +	       "config does not allow loading environment from it.",
> +	       __func__, boot_device);
> +
> +	return ENVL_NOWHERE;
> +}
> +
>   int misc_init_r(void)
>   {
>   	const u32 cpuid_offset = 0x7;
> diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
> index f62cfc9aab..cfa743668b 100644
> --- a/configs/puma-rk3399_defconfig
> +++ b/configs/puma-rk3399_defconfig
> @@ -53,6 +53,7 @@ CONFIG_SPL_OF_CONTROL=y
>   CONFIG_OF_LIVE=y
>   CONFIG_OF_SPL_REMOVE_PROPS="interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
>   CONFIG_ENV_OVERWRITE=y
> +CONFIG_ENV_IS_NOWHERE=y
>   CONFIG_ENV_IS_IN_MMC=y
>   CONFIG_ENV_IS_IN_SPI_FLASH=y
>   CONFIG_ENV_SPI_MAX_HZ=50000000


More information about the U-Boot mailing list