[PATCH v2 1/3] arm: layerscape: Don't select FSL_IFC when booting from SD card

Sean Anderson sean.anderson at seco.com
Mon Oct 17 17:45:10 CEST 2022


FSL_IFC should only be selected when booting from NAND flash (or when
NAND_FSL_IFC is enabled). The existing logic does this correctly when
QSPI is also enabled, but not when just booting from SD.

Signed-off-by: Sean Anderson <sean.anderson at seco.com>
---

Changes in v2:
- Fix using || instead of && for ARCH_LS1043

 arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 80a1642447d..9f76c18feaa 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -62,7 +62,7 @@ config ARCH_LS1043A
 	bool
 	select ARMV8_SET_SMPEN
 	select ARM_ERRATA_855873 if !TFABOOT
-	select FSL_IFC if TFABOOT || (!QSPI_BOOT && !SD_BOOT_QSPI)
+	select FSL_IFC if TFABOOT || (!QSPI_BOOT && !SD_BOOT_QSPI && !SD_BOOT)
 	select FSL_LAYERSCAPE
 	select FSL_LSCH2
 	select GICV2
@@ -98,7 +98,7 @@ config ARCH_LS1043A
 config ARCH_LS1046A
 	bool
 	select ARMV8_SET_SMPEN
-	select FSL_IFC if TFABOOT || (!QSPI_BOOT && !SD_BOOT_QSPI)
+	select FSL_IFC if TFABOOT || (!QSPI_BOOT && !SD_BOOT_QSPI && !SD_BOOT)
 	select FSL_LAYERSCAPE
 	select FSL_LSCH2
 	select GICV2
-- 
2.35.1.1320.gc452695387.dirty



More information about the U-Boot mailing list