[PATCH v1 2/4] watchdog: ulp_wdog: Update watchdog driver for imx93
Stefan Roese
sr at denx.de
Tue Oct 18 08:19:31 CEST 2022
On 09.10.22 10:00, Alice Guo (OSS) wrote:
> From: Alice Guo <alice.guo at nxp.com>
>
> The WDOG clocks are sourced from the fixed 32KHz (lpo_clk).When the
> timeout period exceeds 2 seconds, the value written to the TOVAL
> register is larger than 16-bit can represent. Enabling watchdog
> prescaler to solve this problem.
>
> Signed-off-by: Alice Guo <alice.guo at nxp.com>
> ---
> drivers/watchdog/ulp_wdog.c | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/watchdog/ulp_wdog.c b/drivers/watchdog/ulp_wdog.c
> index c40e785d0a..843f95aa4f 100644
> --- a/drivers/watchdog/ulp_wdog.c
> +++ b/drivers/watchdog/ulp_wdog.c
> @@ -36,6 +36,7 @@ struct wdog_regs {
>
> #define WDGCS_RCS BIT(10)
> #define WDGCS_ULK BIT(11)
> +#define WDOG_CS_PRES BIT(12)
> #define WDGCS_CMD32EN BIT(13)
> #define WDGCS_FLG BIT(14)
>
> @@ -89,7 +90,12 @@ void hw_watchdog_init(void)
> writel(0, &wdog->win);
>
> /* setting 1-kHz clock source, enable counter running, and clear interrupt */
> +#if defined(CONFIG_ARCH_IMX9)
> + writel((cmd32 | WDGCS_WDGE | WDGCS_WDGUPDATE | (WDG_LPO_CLK << 8) |
> + WDGCS_FLG | WDOG_CS_PRES), &wdog->cs);
> +#else
> writel((cmd32 | WDGCS_WDGE | WDGCS_WDGUPDATE |(WDG_LPO_CLK << 8) | WDGCS_FLG), &wdog->cs);
> +#endif
Could you please change from using #ifdef to if (IS_ENABLED)?
if (IS_ENABLED(CONFIG_ARCH_IMX9)) {
...
>
> /* Wait WDOG reconfiguration */
> while (!(readl(&wdog->cs) & WDGCS_RCS))
> @@ -117,11 +123,15 @@ void reset_cpu(void)
> while (!(readl(&wdog->cs) & WDGCS_ULK))
> ;
>
> - hw_watchdog_set_timeout(5); /* 5ms timeout */
> + hw_watchdog_set_timeout(5); /* 5ms timeout for general; 40ms timeout for imx93 */
> writel(0, &wdog->win);
>
> /* enable counter running */
> +#if defined(CONFIG_ARCH_IMX9)
> + writel((cmd32 | WDGCS_WDGE | (WDG_LPO_CLK << 8) | WDOG_CS_PRES), &wdog->cs);
> +#else
> writel((cmd32 | WDGCS_WDGE | (WDG_LPO_CLK << 8)), &wdog->cs);
> +#endif
Here as well please.
Thanks,
Stefan
More information about the U-Boot
mailing list