[PATCH v1] rockchip: phycore_rk3288: remove phycore_init() function

[Johan Jonker]

The phycore_rk3288 board has a SPL size problem,
so remove phycore_init() function to stay within the limits.

Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
 arch/arm/mach-rockchip/rk3288/Kconfig        |  1 -
 board/phytec/phycore_rk3288/phycore-rk3288.c | 46 --------------------
 2 files changed, 47 deletions(-)

diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig
index e8c57843..1be2b585 100644
--- a/arch/arm/mach-rockchip/rk3288/Kconfig
+++ b/arch/arm/mach-rockchip/rk3288/Kconfig
@@ -89,7 +89,6 @@ config TARGET_MIQI_RK3288
 config TARGET_PHYCORE_RK3288
 	bool "phyCORE-RK3288"
         select BOARD_LATE_INIT
-	select SPL_BOARD_INIT if SPL
 	help
 	  Add basic support for the PCM-947 carrier board, a RK3288 based
 	  development board made by PHYTEC. This board works in a combination
diff --git a/board/phytec/phycore_rk3288/phycore-rk3288.c b/board/phytec/phycore_rk3288/phycore-rk3288.c
index 17b987f6..3f49f39e 100644
--- a/board/phytec/phycore_rk3288/phycore-rk3288.c
+++ b/board/phytec/phycore_rk3288/phycore-rk3288.c
@@ -19,8 +19,6 @@
 #include <netdev.h>
 #include <linux/bitops.h>
 #include "som.h"
-#include <power/regulator.h>
-#include <power/rk8xx_pmic.h>
 
 static int valid_rk3288_som(struct rk3288_som *som)
 {
@@ -77,47 +75,3 @@ int rk3288_board_late_init(void)
 
 	return 0;
 }
-
-#ifdef CONFIG_SPL_BUILD
-#if !defined(CONFIG_SPL_OF_PLATDATA)
-static int phycore_init(void)
-{
-	struct udevice *pmic;
-	int ret;
-
-	ret = uclass_first_device_err(UCLASS_PMIC, &pmic);
-	if (ret)
-		return ret;
-
-#if defined(CONFIG_SPL_POWER)
-	/* Increase USB input current to 2A */
-	ret = rk818_spl_configure_usb_input_current(pmic, 2000);
-	if (ret)
-		return ret;
-
-	/* Close charger when USB lower then 3.26V */
-	ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000);
-	if (ret)
-		return ret;
-#endif
-
-	return 0;
-}
-#endif
-
-void spl_board_init(void)
-{
-#if !defined(CONFIG_SPL_OF_PLATDATA)
-	int ret;
-
-	if (of_machine_is_compatible("phytec,rk3288-phycore-som")) {
-		ret = phycore_init();
-		if (ret) {
-			debug("Failed to set up phycore power settings: %d\n",
-			      ret);
-			return;
-		}
-	}
-#endif
-}
-#endif
-- 
2.20.1