[PATCH V3 2/2] dt-bindings: nvmem: u-boot, env: add Broadcom's variant binding

[Rafał Miłecki]

From: Rafał Miłecki <rafal at milecki.pl>

Broadcom uses U-Boot for a lot of their bcmbca familiy chipsets. U-Boot
stores its configuration in an environment data block.

Such blocks are usually stored on flash as a separated partition at
hardcoded address. Broadcom however decided to:
1. Store env data block inside U-Boot partition
2. Avoid sticking to hardcoded offsets
3. Use custom header with "uEnv" magic and env data length

Example (length 0x4000):
$ hexdump -n 32 -C -s 0x40000 /dev/mtdblock0
00040000  76 6e 45 75 00 40 00 00  34 89 7a 82 49 4d 41 47  |vnEu. at ..4.z.IMAG|
00040010  45 3d 4e 41 4e 44 3a 31  4d 2c 31 30 32 34 4d 00  |E=NAND:1M,1024M.|
(0x40000 offset is unit specific and can change)

Starting with the commit 118f3fbe517f4 ("dt-bindings: mtd: partitions:
support label/name only partition") DT can describe partitions matching
them by a name (without specifying actual address). With that feature
and this binding change it's possible to:
1. Specify DT node for Broadcom's U-Boot env data subpartition
2. Add nodes for specific environment data variables
3. Reference them as NVMEM cells

This binding is unlikely to help Broadcom's U-Boot. U-Boot SPL needs to
find environment data early (before it accesses DTB) and it does that by
looking for an "uEnv" magic. Dirty way.

This binding can however be used by operating systems. It allows
describing cleanly U-Boot, its env data and variables. It tells
operating system about Broadcom-specific env data so it can parse it.

Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
V2: Work on better commit body & add example
V3: Avoid duplicated "mac" label
---
 .../devicetree/bindings/nvmem/u-boot,env.yaml | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
index e96bca99f2d9..cbc5c69fd405 100644
--- a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
+++ b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
@@ -38,6 +38,8 @@ properties:
         const: u-boot,env-redundant-bool
       - description: Two redundant blocks with active having higher counter
         const: u-boot,env-redundant-count
+      - description: Broadcom's variant with custom header
+        const: brcm,env
 
   reg:
     maxItems: 1
@@ -73,3 +75,22 @@ examples:
             };
         };
     };
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition at 0 {
+            reg = <0x0 0x100000>;
+            compatible = "brcm,u-boot";
+            label = "u-boot";
+
+            partition-u-boot-env {
+                compatible = "brcm,env";
+
+                ethaddr {
+                };
+            };
+        };
+    };
-- 
2.34.1