[PATCH v2 11/12] rockchip: lion-rk3368: migrate to u-boot-rockchip.bin

[Kever Yang]

Hi Quentin,

     I got below error when apply this patch, could you help to check

+Error: arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi:44.16-17 syntax error
+FATAL ERROR: Unable to parse input tree
+make[3]: *** [arch/arm/dts/rk3368-lion-haikou.dtb] Error 1
+make[2]: *** [arch-dtbs] Error 2

Thanks,

- Kever

On 2022/9/15 17:14, Quentin Schulz wrote:
> From: Quentin Schulz <quentin.schulz at theobroma-systems.com>
>
> The offset of the SPL payload on Lion is different than for other
> Rockchip devices in that it is stored at offset 256K instead of much
> further away in the MMC.
>
> Flashing one binary instead of two at different offsets is much more
> user friendly so let's migrate to it by modifying the offset in the Lion
> specific Device Tree.
>
> Cc: Quentin Schulz <foss+uboot at 0leil.net>
> Signed-off-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
> ---
>   arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi | 8 ++++++++
>   board/theobroma-systems/lion_rk3368/README  | 9 +++------
>   2 files changed, 11 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi b/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi
> index 7826d1e70b..02cb5ef9d9 100644
> --- a/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi
> +++ b/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi
> @@ -38,6 +38,14 @@
>   	};
>   };
>   
> +&binman {
> +	simple-bin {
> +		blob {
> +			offset = <((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512)>;
> +		};
> +	};
> +};
> +
>   &gpio2 {
>   	u-boot,dm-pre-reloc;
>   };
> diff --git a/board/theobroma-systems/lion_rk3368/README b/board/theobroma-systems/lion_rk3368/README
> index 7488b18326..3c15a7bb36 100644
> --- a/board/theobroma-systems/lion_rk3368/README
> +++ b/board/theobroma-systems/lion_rk3368/README
> @@ -27,14 +27,12 @@ Build the full U-Boot and a FIT image including the ATF
>   Flash the image
>   ===============
>   
> -Copy the SPL to offset 32k and the FIT image containing the payloads
> -(U-Boot proper, ATF, devicetree) to offset 256k card.
> +Copy u-boot-rockchip.bin at offset 32k on SD-Card/eMMC.
>   
>   SD-Card
>   -------
>   
> -  > dd if=idbloader.img of=/dev/sdb seek=64
> -  > dd if=u-boot.itb of=/dev/sdb seek=512
> +  > dd if=u-boot-rockchip.bin of=/dev/sdb seekp=64
>   
>   eMMC
>   ----
> @@ -47,8 +45,7 @@ help of the Rockchip loader binary.
>     > autoreconf -i && && ./configure && make
>     > git clone https://github.com/rockchip-linux/rkbin.git
>     > ./rkdeveloptool db rkbin/rk33/rk3368_loader_v2.00.256.bin
> -  > ./rkdeveloptool wl 64 ../spl.img
> -  > ./rkdeveloptool wl 512 ../u-boot.itb
> +  > ./rkdeveloptool wl 64 ../u-boot-rockchip.bin
>   
>   
>   If everything went according to plan, you should see the following