[PATCH v2 4/4] watchdog: ulp_wdog: add driver model for ulp watchdog driver
Alice Guo (OSS)
alice.guo at oss.nxp.com
Fri Oct 21 10:41:18 CEST 2022
From: Alice Guo <alice.guo at nxp.com>
Enable driver model for ulp watchdog timer. When CONFIG_WDT=y and the
status of device node is "okay", initr_watchdog will be called and
finally calls ulp_wdt_probe() and ulp_wdt_start().
Signed-off-by: Alice Guo <alice.guo at nxp.com>
Reviewed-by: Ye Li <ye.li at nxp.com>
---
Changes for v2:
none
drivers/watchdog/ulp_wdog.c | 94 ++++++++++++++++++++++++++++++++++---
1 file changed, 87 insertions(+), 7 deletions(-)
diff --git a/drivers/watchdog/ulp_wdog.c b/drivers/watchdog/ulp_wdog.c
index 1b286816b5..e081054304 100644
--- a/drivers/watchdog/ulp_wdog.c
+++ b/drivers/watchdog/ulp_wdog.c
@@ -7,6 +7,8 @@
#include <cpu_func.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
+#include <dm.h>
+#include <wdt.h>
/*
* MX7ULP WDOG Register Map
@@ -18,6 +20,11 @@ struct wdog_regs {
u32 win;
};
+struct ulp_wdt_priv {
+ struct wdog_regs *wdog;
+ u32 clk_rate;
+};
+
#ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS
#define CONFIG_WATCHDOG_TIMEOUT_MSECS 0x1500
#endif
@@ -46,6 +53,9 @@ struct wdog_regs {
#define WDG_32KHZ_CLK (0x2)
#define WDG_EXT_CLK (0x3)
+#define CLK_RATE_1KHZ 1000
+#define CLK_RATE_32KHZ 125
+
void hw_watchdog_set_timeout(u16 val)
{
/* setting timeout value */
@@ -54,10 +64,8 @@ void hw_watchdog_set_timeout(u16 val)
writel(val, &wdog->toval);
}
-void hw_watchdog_reset(void)
+void ulp_watchdog_reset(struct wdog_regs *wdog)
{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR;
-
if (readl(&wdog->cs) & WDGCS_CMD32EN) {
writel(REFRESH_WORD, &wdog->cnt);
} else {
@@ -68,9 +76,8 @@ void hw_watchdog_reset(void)
}
}
-void hw_watchdog_init(void)
+void ulp_watchdog_init(struct wdog_regs *wdog, u16 timeout)
{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR;
u32 cmd32 = 0;
if (readl(&wdog->cs) & WDGCS_CMD32EN) {
@@ -87,7 +94,7 @@ void hw_watchdog_init(void)
while (!(readl(&wdog->cs) & WDGCS_ULK))
;
- hw_watchdog_set_timeout(CONFIG_WATCHDOG_TIMEOUT_MSECS);
+ hw_watchdog_set_timeout(timeout);
writel(0, &wdog->win);
/* setting 1-kHz clock source, enable counter running, and clear interrupt */
@@ -102,7 +109,21 @@ void hw_watchdog_init(void)
while (!(readl(&wdog->cs) & WDGCS_RCS))
;
- hw_watchdog_reset();
+ ulp_watchdog_reset(wdog);
+}
+
+void hw_watchdog_reset(void)
+{
+ struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR;
+
+ ulp_watchdog_reset(wdog);
+}
+
+void hw_watchdog_init(void)
+{
+ struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR;
+
+ ulp_watchdog_init(wdog, CONFIG_WATCHDOG_TIMEOUT_MSECS);
}
void reset_cpu(void)
@@ -142,3 +163,62 @@ void reset_cpu(void)
while (1);
}
+
+static int ulp_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
+{
+ struct ulp_wdt_priv *priv = dev_get_priv(dev);
+ u64 timeout = 0;
+
+ timeout = (timeout_ms * priv->clk_rate) / 1000;
+ if (timeout > U16_MAX)
+ return -EINVAL;
+
+ ulp_watchdog_init(priv->wdog, (u16)timeout);
+
+ return 0;
+}
+
+static int ulp_wdt_reset(struct udevice *dev)
+{
+ struct ulp_wdt_priv *priv = dev_get_priv(dev);
+
+ ulp_watchdog_reset(priv->wdog);
+
+ return 0;
+}
+
+static int ulp_wdt_probe(struct udevice *dev)
+{
+ struct ulp_wdt_priv *priv = dev_get_priv(dev);
+
+ priv->wdog = dev_read_addr_ptr(dev);
+ if (!priv->wdog)
+ return -EINVAL;
+
+ priv->clk_rate = (u32)dev_get_driver_data(dev);
+ if (!priv->clk_rate)
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct wdt_ops ulp_wdt_ops = {
+ .start = ulp_wdt_start,
+ .reset = ulp_wdt_reset,
+};
+
+static const struct udevice_id ulp_wdt_ids[] = {
+ { .compatible = "fsl,imx7ulp-wdt", .data = CLK_RATE_1KHZ },
+ { .compatible = "fsl,imx8ulp-wdt", .data = CLK_RATE_1KHZ },
+ { .compatible = "fsl,imx93-wdt", .data = CLK_RATE_32KHZ },
+ {}
+};
+
+U_BOOT_DRIVER(ulp_wdt) = {
+ .name = "ulp_wdt",
+ .id = UCLASS_WDT,
+ .of_match = ulp_wdt_ids,
+ .priv_auto = sizeof(struct ulp_wdt_priv),
+ .probe = ulp_wdt_probe,
+ .ops = &ulp_wdt_ops,
+};
--
2.17.1
More information about the U-Boot
mailing list