[PATCH 4/4] ARM: dts: imx8m: imx8mm-mx8menlo: Enable SPL SDP support

[sbabic at denx.de]

> Enable DM USB, DM PHY and USB gadget support in imx8mm-mx8menlo SPL
> to let the board continue SDP loading of second stage after the first
> stage was loaded by BootROM SDP implementation. It is not possible to
> jump back into BootROM v1 and let the BootROM implementation continue
> the SDP loading, all this has to be performed by the U-Boot CI HDRC
> controller driver and SDP protocol implementation, both of which fit
> into the SPL just barely.
> With this patch, it is possible to start both U-Boot SPL and U-Boot
> using e.g. uuu on this board as follows:
> $ uuu -brun spl flash.bin
> Signed-off-by: Marek Vasut <marex at denx.de>
> Reviewed-by: Fabio Estevam <festevam at denx.de>
> Reviewed-by: Peng Fan <peng.fan at nxp.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================