[PATCH v15 00/15] FWU: Add FWU Multi Bank Update feature support
Sughosh Ganu
sughosh.ganu at linaro.org
Fri Oct 21 14:45:53 CEST 2022
The patchset adds support for the FWU Multi Bank Update[1]
feature. Certain aspects of the Dependable Boot[2] specification have
also been implemented.
The FWU multi bank update feature is used for supporting multiple
sets(also called banks) of firmware image(s), allowing the platform to
boot from a different bank, in case it fails to boot from the active
bank. This functionality is supported by keeping the relevant
information in a structure called metadata, which provides information
on the images. Among other parameters, the metadata structure contains
information on the currect active bank that is being used to boot
image(s).
Functionality is being added to work with the UEFI capsule driver in
u-boot. The metadata is read to gather information on the update bank,
which is the bank to which the firmware images would be flashed to. On
a successful completion of the update of all components, the active
bank field in the metadata is updated, to reflect the bank from which
the platform will boot on the subsequent boots.
Currently, the feature is being enabled on the STM32MP157C-DK2 and
Synquacer boards. The DK2 board boots a FIP image from a uSD card
partitioned with the GPT partioning scheme, while the Synquacer board
boots a FIP image from a MTD partitioned SPI NOR flash device.
This feature also requires changes in a previous stage of
bootloader, which parses the metadata and selects the bank to boot the
image(s) from. Support has being added in tf-a(BL2 stage) for the
STM32MP157C-DK2 board to boot the active bank images. These changes
have been merged to the upstream tf-a repository.
The patch for adding a python test for the feature has been developed,
and was sent in the version 5 of the patches[3]. However, the test
script depends on adding support for the feature on MTD SPI NOR
devices, and that is being done as part of the Synquacer
patches. Hence these set of patches do not have the test script for
the feature. That will be added through the patches for adding support
for the feauture on Synquacer platform.
[1] - https://developer.arm.com/documentation/den0118/a
[2] - https://git.codelinaro.org/linaro/dependable-boot/mbfw/uploads/6f7ddfe3be24e18d4319e108a758d02e/mbfw.pdf
[3] - https://lists.denx.de/pipermail/u-boot/2022-June/485992.html
Changes since V14:
* Copy the primary metadata copy to the secondary metadata partition
when both partitions are valid but do not match as suggested by
Etienne
* Add a note in fwu_update_mdata() specifying that the primary
metadata partition needs to be updated first
* Return EBADMSG in fwu_check_mdata_validity() instead of -1 as
suggested by Ilias
* Remove the check for nparts while iterating over the partitions as
suggested by Ilias
* Drop the superfluous braces in gpt_get_mdata_disk_part()
* Add a NULL check for mdata in gpt_read_write_mdata() as
suggested by Ilias
* s/trial_state/in_trial/g as suggested by Ilias
* Move the call to check for trial state in fwu_boottime_checks() as
suggested by Ilias
* Put the checks done earlier in fwu_trial_state_check() in
fwu_trial_count_update() with the deletion of the variable called
from a single place as suggested by Ilias
* Add a function fwu_empty_capsule_checks_pass() to check if the empty
capsules can be applied
* Initialise the return value to EFI_INVALID_PARAMETER in
fwu_empty_capsule_process() and get rid of the else part as
suggested by Ilias
* Remove the superfluous assignment of EFI_SUCCESS in
fwu_post_update_process() as suggested by Ilias
* Add a check for fwu_empty_capsule_checks_pass() to allow application
of empty capsules only in trial state
* Add a range check for the oemflags passed as suggested by Etienne
* s/updation/update/ as suggested by Etienne
Sughosh Ganu (15):
dt/bindings: Add bindings for GPT based FWU Metadata storage device
FWU: Add FWU metadata structure and driver for accessing metadata
FWU: Add FWU metadata access driver for GPT partitioned block devices
stm32mp1: Add a node for the FWU metadata device
stm32mp1: Add image information for capsule updates
FWU: Add helper functions for accessing FWU metadata
FWU: STM32MP1: Add support to read boot index from backup register
event: Add an event for main_loop
FWU: Add boot time checks as highlighted by the FWU specification
FWU: Add support for the FWU Multi Bank Update feature
FWU: cmd: Add a command to read FWU metadata
test: dm: Add test cases for FWU Metadata uclass
mkeficapsule: Add support for generating empty capsules
mkeficapsule: Add support for setting OEM flags in capsule header
FWU: doc: Add documentation for the FWU feature
arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi | 7 +
arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi | 5 +
arch/arm/mach-stm32mp/include/mach/stm32.h | 5 +
arch/sandbox/Kconfig | 6 +
arch/sandbox/dts/test.dts | 7 +-
board/sandbox/sandbox.c | 8 +
board/st/stm32mp1/stm32mp1.c | 39 +
cmd/Kconfig | 6 +
cmd/Makefile | 1 +
cmd/fwu_mdata.c | 79 ++
common/board_r.c | 3 +
common/event.c | 3 +
configs/sandbox64_defconfig | 5 +-
doc/develop/uefi/fwu_updates.rst | 184 +++++
doc/develop/uefi/index.rst | 1 +
doc/develop/uefi/uefi.rst | 12 +
.../firmware/fwu-mdata-gpt.yaml | 32 +
doc/mkeficapsule.1 | 33 +-
doc/usage/cmd/fwu_mdata.rst | 43 ++
doc/usage/index.rst | 1 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/fwu-mdata/Kconfig | 16 +
drivers/fwu-mdata/Makefile | 8 +
drivers/fwu-mdata/fwu-mdata-uclass.c | 186 +++++
drivers/fwu-mdata/gpt_blk.c | 290 +++++++
include/configs/stm32mp15_common.h | 4 +
include/dm/uclass-id.h | 1 +
include/event.h | 3 +
include/fwu.h | 412 ++++++++++
include/fwu_mdata.h | 67 ++
lib/Kconfig | 6 +
lib/Makefile | 1 +
lib/efi_loader/efi_capsule.c | 210 ++++-
lib/efi_loader/efi_firmware.c | 14 +
lib/fwu_updates/Kconfig | 33 +
lib/fwu_updates/Makefile | 7 +
lib/fwu_updates/fwu.c | 719 ++++++++++++++++++
lib/fwu_updates/fwu_gpt.c | 123 +++
test/dm/Makefile | 1 +
test/dm/fwu_mdata.c | 147 ++++
test/dm/fwu_mdata_disk_image.h | 112 +++
.../test_capsule_firmware_fit.py | 1 -
.../test_capsule_firmware_signed_fit.py | 1 -
tools/Makefile | 4 +-
tools/eficapsule.h | 8 +
tools/mkeficapsule.c | 114 ++-
47 files changed, 2949 insertions(+), 22 deletions(-)
create mode 100644 cmd/fwu_mdata.c
create mode 100644 doc/develop/uefi/fwu_updates.rst
create mode 100644 doc/device-tree-bindings/firmware/fwu-mdata-gpt.yaml
create mode 100644 doc/usage/cmd/fwu_mdata.rst
create mode 100644 drivers/fwu-mdata/Kconfig
create mode 100644 drivers/fwu-mdata/Makefile
create mode 100644 drivers/fwu-mdata/fwu-mdata-uclass.c
create mode 100644 drivers/fwu-mdata/gpt_blk.c
create mode 100644 include/fwu.h
create mode 100644 include/fwu_mdata.h
create mode 100644 lib/fwu_updates/Kconfig
create mode 100644 lib/fwu_updates/Makefile
create mode 100644 lib/fwu_updates/fwu.c
create mode 100644 lib/fwu_updates/fwu_gpt.c
create mode 100644 test/dm/fwu_mdata.c
create mode 100644 test/dm/fwu_mdata_disk_image.h
--
2.34.1
More information about the U-Boot
mailing list