[PATCH 1/3] imx: imx8mm_beacon: Eliminate a few extras to free up SPL space

[Adam Ford]

There are a few functions which are not essential for use in
SPL, but they take up enough space to make other preferred
features not fit.  Remove the extras.

Signed-off-by: Adam Ford <aford173 at gmail.com>

diff --git a/board/beacon/imx8mm/spl.c b/board/beacon/imx8mm/spl.c
index a93cc93878..b0e9d918da 100644
--- a/board/beacon/imx8mm/spl.c
+++ b/board/beacon/imx8mm/spl.c
@@ -44,11 +44,6 @@ static void spl_dram_init(void)
 	ddr_init(&dram_timing);
 }
 
-void spl_board_init(void)
-{
-	debug("Normal Boot\n");
-}
-
 #ifdef CONFIG_SPL_LOAD_FIT
 int board_fit_config_name_match(const char *name)
 {
diff --git a/configs/imx8mm_beacon_defconfig b/configs/imx8mm_beacon_defconfig
index e37ce01c19..f6a1012d8a 100644
--- a/configs/imx8mm_beacon_defconfig
+++ b/configs/imx8mm_beacon_defconfig
@@ -29,7 +29,6 @@ CONFIG_DEFAULT_FDT_FILE="imx8mm-beacon-kit.dtb"
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_STACK=0x920000
 CONFIG_SYS_SPL_MALLOC=y
@@ -88,12 +87,9 @@ CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
-CONFIG_SPL_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
-CONFIG_SPL_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS400_ES_SUPPORT=y
 CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_SPL_MMC_HS400_SUPPORT=y
 CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
@@ -113,14 +109,12 @@ CONFIG_PINCTRL_IMX8M=y
 CONFIG_POWER_DOMAIN=y
 CONFIG_IMX8M_POWER_DOMAIN=y
 CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
 CONFIG_DM_PMIC_BD71837=y
 CONFIG_SPL_DM_PMIC_BD71837=y
 CONFIG_DM_REGULATOR=y
-CONFIG_SPL_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_BD71837=y
-CONFIG_SPL_DM_REGULATOR_BD71837=y
 CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_SPL_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
-- 
2.34.1