[PATCH v2 04/16] imx6ull: synchronise device tree with linux

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler at toradex.com>

Synchronise device tree with linux v6.0-rc1.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---

(no changes since v1)

 arch/arm/dts/imx6ull-colibri.dtsi | 10 +++++++---
 arch/arm/dts/imx6ull.dtsi         |  2 +-
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/imx6ull-colibri.dtsi b/arch/arm/dts/imx6ull-colibri.dtsi
index 15621e03fa..577a424b0e 100644
--- a/arch/arm/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/dts/imx6ull-colibri.dtsi
@@ -94,7 +94,6 @@
 };
 
 &adc1 {
-	num-channels = <10>;
 	vref-supply = <&reg_module_3v3_avdd>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_adc1>;
@@ -166,7 +165,7 @@
 	atmel_mxt_ts: touchscreen at 4a {
 		compatible = "atmel,maxtouch";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_atmel_conn>;
+		pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>;
 		reg = <0x4a>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;       /* SODIMM 107 / INT */
@@ -331,7 +330,6 @@
 	pinctrl_atmel_conn: atmelconngrp {
 		fsl,pins = <
 			MX6UL_PAD_JTAG_MOD__GPIO1_IO10          0xb0a0  /* SODIMM 106 */
-			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04     0xb0a0	/* SODIMM 107 */
 		>;
 	};
 
@@ -684,6 +682,12 @@
 };
 
 &iomuxc_snvs {
+	pinctrl_atmel_snvs_conn: atmelsnvsconngrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04     0xb0a0	/* SODIMM 107 */
+		>;
+	};
+
 	pinctrl_snvs_gpio1: snvsgpio1grp {
 		fsl,pins = <
 			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */
diff --git a/arch/arm/dts/imx6ull.dtsi b/arch/arm/dts/imx6ull.dtsi
index 9bf67490ac..2bccd45e9f 100644
--- a/arch/arm/dts/imx6ull.dtsi
+++ b/arch/arm/dts/imx6ull.dtsi
@@ -50,7 +50,7 @@
 };
 
 / {
-	soc {
+	soc: soc {
 		aips3: bus at 2200000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
-- 
2.35.1