[PATCH v3] imx: imx8qm: cgtqmx8: switch to binman

Stefano Babic sbabic at denx.de
Mon Oct 24 14:21:54 CEST 2022


On 24.10.22 13:59, Oliver Graute wrote:
> On 24/10/22, Stefano Babic wrote:
>> On 24.10.22 13:37, Fabio Estevam wrote:
>>> Hi Stefano and Oliver,
>>>
>>> On Tue, May 3, 2022 at 7:49 AM Oliver Graute
>>> <oliver.graute at kococonnector.com> wrote:
>>>>
>>>> Switch to use binman to pack images
>>>>
>>>> Signed-off-by: Oliver Graute <oliver.graute at kococonnector.com>
>>>> Reviewed-by: Fabio Estevam <festevam at denx.de>
>>>> Reviewed-by: Simon Glass <sjg at chromium.org>
>>>> ---
>>>> Changes for v3
>>>>    -added Reviewed-by
>>>>    -rebased on master
>>>>
>>>>    arch/arm/dts/imx8qm-cgtqmx8.dts     | 1 +
>>>>    arch/arm/mach-imx/imx8/Kconfig      | 1 +
>>>>    board/congatec/cgtqmx8/imximage.cfg | 4 ++--
>>>>    configs/cgtqmx8_defconfig           | 2 +-
>>>>    doc/board/congatec/cgtqmx8.rst      | 3 +--
>>>>    5 files changed, 6 insertions(+), 5 deletions(-)
>>>
>>> Just realized that v3 does not include imx8qm-u-boot.dtsi and this breaks CI.
>>>
>>
>> Right - as well as V4, this is what I tried to merge and breaks. I have drop
>> it.
>>
>>> The previous v2 did include it:
>>> https://patchwork.ozlabs.org/project/uboot/patch/20220221090139.10066-1-oliver.graute@kococonnector.com/
>>
>> Thanks for noting this - Oliver, can you check and repost a V5, then ?
> 
> The arch/arm/dts/imx8qm-u-boot.dtsi  is applied on the binman Patch for
> "PATCH v3 imx: imx8qm-rom7720: switch to binman"
> 
> So if you first apply the patches for the imx8qm-rom7720 Board it should work.


Ok, thanks for tipp - I apply both and will test again

Stefano


> 
> https://patchwork.ozlabs.org/project/uboot/patch/20221007130945.12493-1-oliver.graute@kococonnector.com/
> 
> Best regards,
> 
> Oliver

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================



More information about the U-Boot mailing list