[PATCH V2 5/7] arm: dts: imx8mn-evk: Consolidate with imx8mn-u-boot

[sbabic at denx.de]

> Now that a unified imx8mn-u-boot is available, remove duplicated
> code for generating flash.bin and other common imx8mn peripherals.
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> diff --git a/arch/arm/dts/imx8mn-evk-u-boot.dtsi b/arch/arm/dts/imx8mn-evk-u-boot.dtsi
> index c4b83d3f7e..6c6c949f43 100644
> --- a/arch/arm/dts/imx8mn-evk-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mn-evk-u-boot.dtsi
> @@ -24,111 +24,3 @@
>  &pinctrl_pmic {
>  	u-boot,dm-spl;
>  };
> -
> -&binman {
> -	 u-boot-spl-ddr {
> -		filename = "u-boot-spl-ddr.bin";
> -		pad-byte = <0xff>;
> -		align-size = <4>;
> -		align = <4>;
> -
> -		u-boot-spl {
> -			align-end = <4>;
> -		};
> -
> -		ddr-1d-imem-fw {
> -			filename = "lpddr4_pmu_train_1d_imem.bin";
> -			type = "blob-ext";
> -			align-end = <4>;
> -		};
> -
> -		ddr-1d-dmem-fw {
> -			filename = "lpddr4_pmu_train_1d_dmem.bin";
> -			type = "blob-ext";
> -			align-end = <4>;
> -		};
> -
> -		ddr-2d-imem-fw {
> -			filename = "lpddr4_pmu_train_2d_imem.bin";
> -			type = "blob-ext";
> -			align-end = <4>;
> -		};
> -
> -		ddr-2d-dmem-fw {
> -			filename = "lpddr4_pmu_train_2d_dmem.bin";
> -			type = "blob-ext";
> -			align-end = <4>;
> -		};
> -	};
> -
> -
> -	spl {
> -		filename = "spl.bin";
> -
> -		mkimage {
> -			args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x912000";
> -
> -			blob {
> -				filename = "u-boot-spl-ddr.bin";
> -			};
> -		};
> -	};
> -
> -	itb {
> -		filename = "u-boot.itb";
> -
> -		fit {
> -			description = "Configuration to load ATF before U-Boot";
> -			#address-cells = <1>;
> -			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
> -
> -			images {
> -				uboot {
> -					description = "U-Boot (64-bit)";
> -					type = "standalone";
> -					arch = "arm64";
> -					compression = "none";
> -					load = <CONFIG_SYS_TEXT_BASE>;
> -
> -					uboot_blob: blob-ext {
> -						filename = "u-boot-nodtb.bin";
> -					};
> -				};
> -
> -				atf {
> -					description = "ARM Trusted Firmware";
> -					type = "firmware";
> -					arch = "arm64";
> -					compression = "none";
> -					load = <0x960000>;
> -					entry = <0x960000>;
> -
> -					atf_blob: blob-ext {
> -						filename = "bl31.bin";
> -					};
> -				};
> -
> -				fdt {
> -					description = "NAME";
> -					type = "flat_dt";
> -					compression = "none";
> -
> -					uboot_fdt_blob: blob-ext {
> -						filename = "u-boot.dtb";
> -					};
> -				};
> -			};
> -
> -			configurations {
> -				default = "conf";
> -
> -				conf {
> -					description = "NAME";
> -					firmware = "uboot";
> -					loadables = "atf";
> -					fdt = "fdt";
> -				};
> -			};
> -		};
> -	};
> -};
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================