[PATCH 3/3] rockchip: Add initial support for the PINE64 Pinephone Pro

Peter Robinson pbrobinson at gmail.com
Tue Oct 25 09:52:23 CEST 2022 

The Pinephone Pro is another device by PINE64. It's closely related
to the Pinebook Pro of which this initial support is derived from.

Specification:
- A variant of the Rockchip RK3399
- A 6 inch 720*1440 DSI display
- Front and rear cameras
- Type-C interface with alt mode display (DP 1.2) and PD charging
- 4GB LPDDR4 RAM
- 128GB eMMC
- mSD card slot
- An AP6255 module for 802.11ac WiFi and Bluetooth 5
- Quectel EG25-G 4G/LTE modem

Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
---
 arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi |  39 +++++++
 arch/arm/mach-rockchip/rk3399/Kconfig         |   8 ++
 board/pine64/pinephone-pro-rk3399/Kconfig     |  15 +++
 board/pine64/pinephone-pro-rk3399/MAINTAINERS |   8 ++
 board/pine64/pinephone-pro-rk3399/Makefile    |   1 +
 .../pinephone-pro-rk3399.c                    |  76 +++++++++++++
 configs/pinephone-pro-rk3399_defconfig        | 104 ++++++++++++++++++
 include/configs/pinephone-pro-rk3399.h        |  19 ++++
 8 files changed, 270 insertions(+)
 create mode 100644 arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
 create mode 100644 board/pine64/pinephone-pro-rk3399/Kconfig
 create mode 100644 board/pine64/pinephone-pro-rk3399/MAINTAINERS
 create mode 100644 board/pine64/pinephone-pro-rk3399/Makefile
 create mode 100644 board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
 create mode 100644 configs/pinephone-pro-rk3399_defconfig
 create mode 100644 include/configs/pinephone-pro-rk3399.h

diff --git a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
new file mode 100644
index 00000000000..c9f1f4af635
--- /dev/null
+++ b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Peter Robinson <pbrobinson at gmail.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+	};
+
+	config {
+		u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */
+	};
+};
+
+&i2c0 {
+	u-boot,dm-pre-reloc;
+};
+
+&rk818 {
+	u-boot,dm-pre-reloc;
+};
+
+&rng {
+	status = "okay";
+};
+
+&sdhci {
+	max-frequency = <25000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc {
+	max-frequency = <20000000>;
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig
index b48feeb3466..d01063ac98b 100644
--- a/arch/arm/mach-rockchip/rk3399/Kconfig
+++ b/arch/arm/mach-rockchip/rk3399/Kconfig
@@ -39,6 +39,13 @@ config TARGET_PINEBOOK_PRO_RK3399
 	  with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port,
 	  1920*1080 screen and all the usual laptop features.
 
+config TARGET_PINEPHONE_PRO_RK3399
+	bool "PinePhone Pro"
+	help
+	  PinePhone Pro is a phone based on a variant of the Rockchip
+	  rk3399 SoC with 4Gb RAM, onboard eMMC, USB-C, headphone jack,
+	  720x1440 screen and a Quectel 4G/LTE modem.
+
 config TARGET_PUMA_RK3399
 	bool "Theobroma Systems RK3399-Q7 (Puma)"
 	help
@@ -165,6 +172,7 @@ endif # BOOTCOUNT_LIMIT
 source "board/firefly/roc-pc-rk3399/Kconfig"
 source "board/google/gru/Kconfig"
 source "board/pine64/pinebook-pro-rk3399/Kconfig"
+source "board/pine64/pinephone-pro-rk3399/Kconfig"
 source "board/pine64/rockpro64_rk3399/Kconfig"
 source "board/rockchip/evb_rk3399/Kconfig"
 source "board/theobroma-systems/puma_rk3399/Kconfig"
diff --git a/board/pine64/pinephone-pro-rk3399/Kconfig b/board/pine64/pinephone-pro-rk3399/Kconfig
new file mode 100644
index 00000000000..13d6465ae6e
--- /dev/null
+++ b/board/pine64/pinephone-pro-rk3399/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_PINEPHONE_PRO_RK3399
+
+config SYS_BOARD
+	default "pinephone-pro-rk3399"
+
+config SYS_VENDOR
+	default "pine64"
+
+config SYS_CONFIG_NAME
+	default "pinephone-pro-rk3399"
+
+config BOARD_SPECIFIC_OPTIONS
+	def_bool y
+
+endif
diff --git a/board/pine64/pinephone-pro-rk3399/MAINTAINERS b/board/pine64/pinephone-pro-rk3399/MAINTAINERS
new file mode 100644
index 00000000000..c923ff1be32
--- /dev/null
+++ b/board/pine64/pinephone-pro-rk3399/MAINTAINERS
@@ -0,0 +1,8 @@
+PINEPHONE_PRO
+M:	Peter Robinson <pbrobinson at gmail.com>
+S:	Maintained
+F:	board/pine64/rk3399-pinephone-pro/
+F:	include/configs/rk3399-pinephone-pro.h
+F:	arch/arm/dts/rk3399-pinephone-pro.dts
+F:	arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
+F:	configs/pinephone-pro-rk3399_defconfig
diff --git a/board/pine64/pinephone-pro-rk3399/Makefile b/board/pine64/pinephone-pro-rk3399/Makefile
new file mode 100644
index 00000000000..8d9203053e5
--- /dev/null
+++ b/board/pine64/pinephone-pro-rk3399/Makefile
@@ -0,0 +1 @@
+obj-y	+= pinephone-pro-rk3399.o
diff --git a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
new file mode 100644
index 00000000000..eb639cd0d07
--- /dev/null
+++ b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ * (C) Copyright 2022 Peter Robinson <pbrobinson at gmail.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <init.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/grf_rk3399.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/misc.h>
+#include <power/regulator.h>
+
+#define GRF_IO_VSEL_BT565_SHIFT 0
+#define PMUGRF_CON0_VSEL_SHIFT 8
+
+#ifndef CONFIG_SPL_BUILD
+int board_early_init_f(void)
+{
+	struct udevice *regulator;
+	int ret;
+
+	ret = regulator_get_by_platname("vcc5v0_usb", &regulator);
+	if (ret) {
+		pr_debug("%s vcc5v0_usb init fail! ret %d\n", __func__, ret);
+		goto out;
+	}
+
+	ret = regulator_set_enable(regulator, true);
+	if (ret)
+		pr_debug("%s vcc5v0-host-en-gpio set fail! ret %d\n", __func__, ret);
+
+out:
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_MISC_INIT_R
+static void setup_iodomain(void)
+{
+	struct rk3399_grf_regs *grf =
+	   syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+	struct rk3399_pmugrf_regs *pmugrf =
+	   syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
+
+	/* BT565 is in 1.8v domain */
+	rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
+
+	/* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
+	rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
+}
+
+int misc_init_r(void)
+{
+	const u32 cpuid_offset = 0x7;
+	const u32 cpuid_length = 0x10;
+	u8 cpuid[cpuid_length];
+	int ret;
+
+	setup_iodomain();
+
+	ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
+	if (ret)
+		return ret;
+
+	ret = rockchip_cpuid_set(cpuid, cpuid_length);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+#endif
diff --git a/configs/pinephone-pro-rk3399_defconfig b/configs/pinephone-pro-rk3399_defconfig
new file mode 100644
index 00000000000..0082d3aec39
--- /dev/null
+++ b/configs/pinephone-pro-rk3399_defconfig
@@ -0,0 +1,104 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x8000
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinephone-pro"
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_TARGET_PINEPHONE_PRO_RK3399=y
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_DEBUG_UART=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_BOOTDELAY=3
+CONFIG_USE_PREBOOT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinephone-pro.dtb"
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_MISC_INIT_R=y
+CONFIG_SPL_MAX_SIZE=0x2e000
+CONFIG_SPL_PAD_TO=0x7f8000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x400000
+CONFIG_SPL_BSS_MAX_SIZE=0x2000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x400000
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_TPL=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_DM_KEYBOARD=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_ROCKCHIP_EFUSE=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SF_DEFAULT_BUS=1
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
+CONFIG_DM_PMIC_FAN53555=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_DM_RESET=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_ROCKCHIP_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS=2
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_EDP=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
diff --git a/include/configs/pinephone-pro-rk3399.h b/include/configs/pinephone-pro-rk3399.h
new file mode 100644
index 00000000000..78017d6bcc3
--- /dev/null
+++ b/include/configs/pinephone-pro-rk3399.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Rockchip Electronics Co., Ltd
+ * Copyright (C) 2022 Peter Robinson <pbrobinson at gmail.com>
+ */
+
+#ifndef __PINEPHONE_PRO_RK3399_H
+#define __PINEPHONE_PRO_RK3399_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+		"stdin=serial,usbkbd\0" \
+		"stdout=serial,vidconsole\0" \
+		"stderr=serial,vidconsole\0"
+
+#include <configs/rk3399_common.h>
+
+#define SDRAM_BANK_SIZE			(2UL << 30)
+
+#endif
-- 
2.38.1

More information about the U-Boot mailing list