[PATCH] microblaze: Make extended addressing support default

[Michal Simek]

On 10/12/22 11:03, Michal Simek wrote:
> From: T Karthik Reddy <t.karthik.reddy at xilinx.com>
> 
> Axi qspi controller supports 32-bit & 24-bit addressing modes
> for micron, macronix & spansion flash parts. But for winbond
> flashes it only supports 24-bit addressing mode.
> Enable CONFIG_SPI_FLASH_BAR to use extended addressing mode
> to make 32-bit addressing mode work on all flashes.
> 
> Signed-off-by: T Karthik Reddy <t.karthik.reddy at xilinx.com>
> Acked-by: Ashok Reddy Soma <ashok.reddy.soma at xilinx.com>
> Signed-off-by: Michal Simek <michal.simek at amd.com>
> ---
> 
>   configs/microblaze-generic_defconfig | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
> index 0f650e59073f..c993cca3c5cb 100644
> --- a/configs/microblaze-generic_defconfig
> +++ b/configs/microblaze-generic_defconfig
> @@ -80,6 +80,7 @@ CONFIG_FLASH_CFI_MTD=y
>   CONFIG_SYS_FLASH_PROTECTION=y
>   CONFIG_SYS_FLASH_CFI=y
>   CONFIG_SYS_MAX_FLASH_SECT=2048
> +CONFIG_SPI_FLASH_BAR=y
>   CONFIG_SPI_FLASH_ISSI=y
>   CONFIG_SPI_FLASH_MACRONIX=y
>   CONFIG_SPI_FLASH_SPANSION=y

Applied.
M