[PATCH v3 6/9] configs: at91: sam9x60ek: Enable DM based nand driver

[Balamanikandan Gunasundar]

Enable Device model supported NAND driver and remove legacy Atmel NAND
driver.

Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar at microchip.com>
---
 configs/sam9x60ek_mmc_defconfig       | 9 ++++++---
 configs/sam9x60ek_nandflash_defconfig | 9 ++++++---
 configs/sam9x60ek_qspiflash_defconfig | 8 +++++---
 3 files changed, 17 insertions(+), 9 deletions(-)

diff --git a/configs/sam9x60ek_mmc_defconfig b/configs/sam9x60ek_mmc_defconfig
index 20b27649bf..94cd2eae51 100644
--- a/configs/sam9x60ek_mmc_defconfig
+++ b/configs/sam9x60ek_mmc_defconfig
@@ -52,6 +52,8 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_FAT=y
 CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
 CONFIG_CLK=y
 CONFIG_CLK_CCF=y
 CONFIG_CLK_AT91=y
@@ -61,15 +63,16 @@ CONFIG_CPU=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_AT91=y
+CONFIG_ATMEL_EBI=y
+CONFIG_MFD_ATMEL_SMC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_MICROCHIP_FLEXCOM=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_MTD=y
+CONFIG_DM_MTD=y
 CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_ATMEL=y
-CONFIG_ATMEL_NAND_HW_PMECC=y
-CONFIG_PMECC_CAP=8
+CONFIG_DM_NAND_ATMEL=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=50000000
diff --git a/configs/sam9x60ek_nandflash_defconfig b/configs/sam9x60ek_nandflash_defconfig
index 8a7f2e0641..e5757d55cc 100644
--- a/configs/sam9x60ek_nandflash_defconfig
+++ b/configs/sam9x60ek_nandflash_defconfig
@@ -54,6 +54,8 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
 CONFIG_CLK=y
 CONFIG_CLK_CCF=y
 CONFIG_CLK_AT91=y
@@ -63,14 +65,15 @@ CONFIG_CPU=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_AT91=y
+CONFIG_ATMEL_EBI=y
+CONFIG_MFD_ATMEL_SMC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_MICROCHIP_FLEXCOM=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
+CONFIG_DM_MTD=y
 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
-CONFIG_NAND_ATMEL=y
-CONFIG_ATMEL_NAND_HW_PMECC=y
-CONFIG_PMECC_CAP=8
+CONFIG_DM_NAND_ATMEL=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=50000000
diff --git a/configs/sam9x60ek_qspiflash_defconfig b/configs/sam9x60ek_qspiflash_defconfig
index 51449f0233..14a8f63bc7 100644
--- a/configs/sam9x60ek_qspiflash_defconfig
+++ b/configs/sam9x60ek_qspiflash_defconfig
@@ -54,6 +54,8 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_ENV_SPI_MAX_HZ=50000000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
 CONFIG_CLK=y
 CONFIG_CLK_CCF=y
 CONFIG_CLK_AT91=y
@@ -63,6 +65,8 @@ CONFIG_CPU=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_AT91=y
+CONFIG_ATMEL_EBI=y
+CONFIG_MFD_ATMEL_SMC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_MICROCHIP_FLEXCOM=y
 CONFIG_GENERIC_ATMEL_MCI=y
@@ -70,9 +74,7 @@ CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_MTD_RAW_NAND=y
 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
-CONFIG_NAND_ATMEL=y
-CONFIG_ATMEL_NAND_HW_PMECC=y
-CONFIG_PMECC_CAP=8
+CONFIG_DM_NAND_ATMEL=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_MACRONIX=y
-- 
2.25.1