[PATCH v5] imx: imx8qm: cgtqmx8: switch to binman

[Oliver Graute]

On 25/10/22, Oliver Graute wrote:
> Switch to use binman to pack images
> 
> Signed-off-by: Oliver Graute <oliver.graute at kococonnector.com>
> Reviewed-by: Fabio Estevam <festevam at denx.de>
> Reviewed-by: Simon Glass <sjg at chromium.org>

I missed 

Reviewed-by: Peng Fan <peng.fan at nxp.com>
> 
> ---
> Changes for v5
>  - added CONFIG_FIT_EXTERNAL_OFFSET
> 
> Changes for v4
>  - rebased on master
> 
> Changes for v3
>  -added Reviewed-by
>  - rebased on master
> 
>  arch/arm/dts/imx8qm-cgtqmx8.dts     | 1 +
>  arch/arm/mach-imx/imx8/Kconfig      | 1 +
>  board/congatec/cgtqmx8/imximage.cfg | 4 ++--
>  configs/cgtqmx8_defconfig           | 3 ++-
>  doc/board/congatec/cgtqmx8.rst      | 3 +--
>  5 files changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/dts/imx8qm-cgtqmx8.dts b/arch/arm/dts/imx8qm-cgtqmx8.dts
> index 555c357f6f..919d00644f 100644
> --- a/arch/arm/dts/imx8qm-cgtqmx8.dts
> +++ b/arch/arm/dts/imx8qm-cgtqmx8.dts
> @@ -12,6 +12,7 @@
>  /memreserve/ 0x80000000 0x00020000;
>  
>  #include "fsl-imx8qm.dtsi"
> +#include "imx8qm-u-boot.dtsi"
>  
>  / {
>  	model = "Congatec QMX8 Qseven series";
> diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
> index ba2a38c7f7..a0036a32b5 100644
> --- a/arch/arm/mach-imx/imx8/Kconfig
> +++ b/arch/arm/mach-imx/imx8/Kconfig
> @@ -76,6 +76,7 @@ config TARGET_IMX8QM_MEK
>  
>  config TARGET_CONGA_QMX8
>  	bool "Support congatec conga-QMX8 board"
> +	select BINMAN
>  	select BOARD_LATE_INIT
>  	select SUPPORT_SPL
>  	select IMX8QM
> diff --git a/board/congatec/cgtqmx8/imximage.cfg b/board/congatec/cgtqmx8/imximage.cfg
> index 5ecde0c530..43035088e3 100644
> --- a/board/congatec/cgtqmx8/imximage.cfg
> +++ b/board/congatec/cgtqmx8/imximage.cfg
> @@ -4,8 +4,8 @@
>   */
>  
>  
> -/* Boot from SD, sector size 0x400 */
> -BOOT_FROM SD 0x400
> +BOOT_FROM	sd
> +
>  /* SoC type IMX8QM */
>  SOC_TYPE IMX8QM
>  /* Append seco container image */
> diff --git a/configs/cgtqmx8_defconfig b/configs/cgtqmx8_defconfig
> index ddc65a06b9..fb43de624b 100644
> --- a/configs/cgtqmx8_defconfig
> +++ b/configs/cgtqmx8_defconfig
> @@ -20,8 +20,9 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>  CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
>  CONFIG_REMAKE_ELF=y
>  CONFIG_FIT=y
> +CONFIG_FIT_EXTERNAL_OFFSET=0x3000
>  CONFIG_SPL_LOAD_FIT=y
> -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
> +# CONFIG_USE_SPL_FIT_GENERATOR is not set
>  CONFIG_OF_BOARD_SETUP=y
>  CONFIG_BOOTDELAY=3
>  CONFIG_USE_BOOTCOMMAND=y
> diff --git a/doc/board/congatec/cgtqmx8.rst b/doc/board/congatec/cgtqmx8.rst
> index bccdef2f16..16711a844d 100644
> --- a/doc/board/congatec/cgtqmx8.rst
> +++ b/doc/board/congatec/cgtqmx8.rst
> @@ -57,8 +57,7 @@ Build U-Boot
>       $ export ATF_LOAD_ADDR=0x80000000
>       $ export BL33_LOAD_ADDR=0x80020000
>       $ make cgtqmx8_defconfig
> -     $ make u-boot.bin
> -     $ make flash.bin
> +     $ make
>  
>  Flash the binary into the SD card
>  ---------------------------------
> -- 
> 2.17.1
> 

Now Running into this issue:

  MKIMAGE u-boot.img
  MKIMAGE u-boot-dtb.img
  LD      u-boot.elf
make[1]: Für das Ziel „SPL“ ist nichts zu tun.
  BINMAN  all
binman: Section '/binman/u-boot-spl-ddr': Symbol '_binman_u_boot_any_prop_image_pos'
   in entry '/binman/u-boot-spl-ddr/u-boot-spl/u-boot-spl-nodtb': Entry 'u-boot-any' not found in list (u-boot-spl-nodtb,u-boot-spl-dtb,u-boot-spl,main-section)
Makefile:1109: recipe for target 'all' failed
make: *** [all] Error 1

some hints?

Best Regards,

Oliver