[PATCH v5 2/2] serial: mxc: have putc use the TXFIFO

[Fabio Estevam]

Hi Tim,

On 25/10/2022 18:37, Tim Harvey wrote:

> Fabio and Pali,
> 
> Seems reasonable but this does not resolve the problem. Whatever I
> print in board_init gets cutoff by the print from dm_announce.

You are right.

I managed to reproduce it:

--- a/board/warp7/warp7.c
+++ b/board/warp7/warp7.c
@@ -71,6 +71,7 @@ int board_init(void)
         /* address of boot parameters */
         gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;

+       printf("******************* 
0123456789012345678901234567890123456789\n");
         return 0;
  }


It does not print correctly:

U-Boot 2022.10-00796-gf9d16f2c0daf-dirty (Oct 25 2022 - 18:46:05 -0300)

CPU:   Freescale i.MX7S rev1.2 800 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 49C
Reset cause: POR
Model: Element14 Warp i.MX7 Board
Board: WARP7 in secure mode OPTEE DRAM 0x9d000000-0xa0000000
DRAM:  464 MiB
�Core:  73 devices, 17 uclasses, devicetree: separate3456789
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC:   FSL_SDHC: 3, FSL_SDHC: 0
Loading Environment from MMC... OK
In:    serial at 30860000
Out:   serial at 30860000
Err:   serial at 30860000
SEC0:  RNG instantiated
Net:   No ethernet found.
Hit any key to stop autoboot:  0