[PATCH 08/11] arm: dts: Add initial support for AM68 Starter Kit System on Module

[Tom Rini]

On Thu, Oct 27, 2022 at 04:18:43PM +0530, Sinthu Raja wrote:
> From: Sinthu Raja <sinthu.raja at ti.com>
> 
> AM68 Starter Kit (SK) is a low cost, small form factor board designed
> for TI’s AM68 SoC. TI’s AM68 SoC comprises of dual core A72, high
> performance vision accelerators, hardware accelerators, latest C71x
> DSP, high bandwidth real-time IPs for capture and display. The SoC is
> power optimized to provide best in class performance for industrial
> applications.
> 
>         AM68 SK supports the following interfaces:
>         * 16 GB LPDDR4 RAM
>         * x1 Gigabit Ethernet interface
>         * x1 USB 3.1 Type-C port
>         * x2 USB 3.1 Type-A ports
>         * x1 PCIe M.2 M Key
>         * 512 Mbit OSPI flash
>         * x2 CSI2 Camera interface (RPi and TI Camera connector)
>         * 40-pin Raspberry Pi GPIO header
> 
> SK's System on Module (SoM) contains the SoC, PMIC, DDR and OSPI flash.
> Therefore, add support for the components present on the SoM.
> 
> Schematics: https://www.ti.com/lit/zip/SPRR463
> TRM: http://www.ti.com/lit/pdf/spruj28
> 
> Signed-off-by: Sinthu Raja <sinthu.raja at ti.com>
> ---
>  arch/arm/dts/k3-am68-sk-som.dtsi | 167 +++++++++++++++++++++++++++++++

What is the status of this dtsi file (and the ones in subsequent
patches) with upstream Linux? Please mention the tag they're synced from
in the commit message to make future updates easier.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20221027/2fb1583a/attachment.sig>