[PATCH v2 20/28] ARM: dts: rockchip: Add Rockchip RV1126 SoC
Kever Yang
kever.yang at rock-chips.com
Thu Sep 1 15:16:33 CEST 2022
Hi Jagan,
Does this dtsi already merge in kernel?
Thanks,
- Kever
On 2022/8/18 22:52, Jagan Teki wrote:
> RV1126 is a high-performance vision processor SoC for IPC/CVR,
> especially for AI related application.
>
> It is based on quad-core ARM Cortex-A7 32-bit core which integrates
> NEON and FPU. There is a 32KB I-cache and 32KB D-cache for each core
> and 512KB unified L2 cache. It has build-in NPU supports INT8/INT16
> hybrid operation and computing power is up to 2.0TOPs.
>
> This patch add basic core dtsi support.
>
> Signed-off-by: Jon Lin <jon.lin at rock-chips.com>
> Signed-off-by: Sugar Zhang <sugar.zhang at rock-chips.com>
> Signed-off-by: Jagan Teki <jagan at edgeble.ai>
> ---
> Changes for v2:
> - update header filename
>
> arch/arm/dts/rv1126.dtsi | 500 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 500 insertions(+)
> create mode 100644 arch/arm/dts/rv1126.dtsi
>
> diff --git a/arch/arm/dts/rv1126.dtsi b/arch/arm/dts/rv1126.dtsi
> new file mode 100644
> index 0000000000..235bfb126e
> --- /dev/null
> +++ b/arch/arm/dts/rv1126.dtsi
> @@ -0,0 +1,500 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
> + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
> + */
> +
> +#include <dt-bindings/clock/rockchip,rv1126-cru.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/power/rockchip,rv1126-power.h>
> +#include <dt-bindings/soc/rockchip,boot-mode.h>
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + compatible = "rockchip,rv1126";
> +
> + interrupt-parent = <&gic>;
> +
> + aliases {
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + i2c2 = &i2c2;
> + i2c3 = &i2c3;
> + i2c4 = &i2c4;
> + i2c5 = &i2c5;
> + serial0 = &uart0;
> + serial1 = &uart1;
> + serial2 = &uart2;
> + serial3 = &uart3;
> + serial4 = &uart4;
> + serial5 = &uart5;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu at f00 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0xf00>;
> + clocks = <&cru ARMCLK>;
> + };
> +
> + cpu1: cpu at f01 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0xf01>;
> + clocks = <&cru ARMCLK>;
> + };
> +
> + cpu2: cpu at f02 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0xf02>;
> + clocks = <&cru ARMCLK>;
> + };
> +
> + cpu3: cpu at f03 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0xf03>;
> + clocks = <&cru ARMCLK>;
> + };
> + };
> +
> + arm-pmu {
> + compatible = "arm,cortex-a7-pmu";
> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + clock-frequency = <24000000>;
> + };
> +
> + xin24m: oscillator {
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + clock-output-names = "xin24m";
> + #clock-cells = <0>;
> + };
> +
> + grf: syscon at fe000000 {
> + compatible = "rockchip,rv1126-grf", "syscon", "simple-mfd";
> + reg = <0xfe000000 0x20000>;
> + };
> +
> + pmugrf: syscon at fe020000 {
> + compatible = "rockchip,rv1126-pmugrf", "syscon", "simple-mfd";
> + reg = <0xfe020000 0x1000>;
> +
> + pmu_io_domains: io-domains {
> + compatible = "rockchip,rv1126-pmu-io-voltage-domain";
> + status = "disabled";
> + };
> + };
> +
> + qos_emmc: qos at fe860000 {
> + compatible = "rockchip,rv1126-qos", "syscon";
> + reg = <0xfe860000 0x20>;
> + };
> +
> + qos_nandc: qos at fe860080 {
> + compatible = "rockchip,rv1126-qos", "syscon";
> + reg = <0xfe860080 0x20>;
> + };
> +
> + qos_sfc: qos at fe860200 {
> + compatible = "rockchip,rv1126-qos", "syscon";
> + reg = <0xfe860200 0x20>;
> + };
> +
> + qos_sdio: qos at fe86c000 {
> + compatible = "rockchip,rv1126-qos", "syscon";
> + reg = <0xfe86c000 0x20>;
> + };
> +
> + gic: interrupt-controller at feff0000 {
> + compatible = "arm,gic-400";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> +
> + reg = <0xfeff1000 0x1000>,
> + <0xfeff2000 0x2000>,
> + <0xfeff4000 0x2000>,
> + <0xfeff6000 0x2000>;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + pmu: power-management at ff3e0000 {
> + compatible = "rockchip,rv1126-pmu", "syscon", "simple-mfd";
> + reg = <0xff3e0000 0x1000>;
> +
> + power: power-controller {
> + compatible = "rockchip,rv1126-power-controller";
> + #power-domain-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + power-domain at RV1126_PD_NVM {
> + reg = <RV1126_PD_NVM>;
> + clocks = <&cru HCLK_EMMC>,
> + <&cru CLK_EMMC>,
> + <&cru HCLK_NANDC>,
> + <&cru CLK_NANDC>,
> + <&cru HCLK_SFC>,
> + <&cru HCLK_SFCXIP>,
> + <&cru SCLK_SFC>;
> + pm_qos = <&qos_emmc>,
> + <&qos_nandc>,
> + <&qos_sfc>;
> + #power-domain-cells = <0>;
> + };
> +
> + power-domain at RV1126_PD_SDIO {
> + reg = <RV1126_PD_SDIO>;
> + clocks = <&cru HCLK_SDIO>,
> + <&cru CLK_SDIO>;
> + pm_qos = <&qos_sdio>;
> + #power-domain-cells = <0>;
> + };
> + };
> + };
> +
> + i2c0: i2c at ff3f0000 {
> + compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
> + reg = <0xff3f0000 0x1000>;
> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
> + clock-names = "i2c", "pclk";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_xfer>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c at ff400000 {
> + compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
> + reg = <0xff400000 0x1000>;
> + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + rockchip,grf = <&pmugrf>;
> + clocks = <&pmucru CLK_I2C2>, <&pmucru PCLK_I2C2>;
> + clock-names = "i2c", "pclk";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_xfer>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + dmac: dma-controller at ff4e0000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0xff4e0000 0x4000>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + arm,pl330-periph-burst;
> + clocks = <&cru ACLK_DMAC>;
> + clock-names = "apb_pclk";
> + };
> +
> + uart1: serial at ff410000 {
> + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
> + reg = <0xff410000 0x100>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <24000000>;
> + clocks = <&pmucru SCLK_UART1>, <&pmucru PCLK_UART1>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac 7>, <&dmac 6>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1m0_xfer>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + pmucru: clock-controller at ff480000 {
> + compatible = "rockchip,rv1126-pmucru";
> + reg = <0xff480000 0x1000>;
> + rockchip,grf = <&grf>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + cru: clock-controller at ff490000 {
> + compatible = "rockchip,rv1126-cru";
> + reg = <0xff490000 0x1000>;
> + clocks = <&xin24m>;
> + clock-names = "xin24m";
> + rockchip,grf = <&grf>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + i2c1: i2c at ff510000 {
> + compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
> + reg = <0xff510000 0x1000>;
> + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
> + clock-names = "i2c", "pclk";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_xfer>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c at ff520000 {
> + compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
> + reg = <0xff520000 0x1000>;
> + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
> + clock-names = "i2c", "pclk";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c3m0_xfer>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c at ff530000 {
> + compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
> + reg = <0xff530000 0x1000>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
> + clock-names = "i2c", "pclk";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c4m0_xfer>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c5: i2c at ff540000 {
> + compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
> + reg = <0xff540000 0x1000>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
> + clock-names = "i2c", "pclk";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c5m0_xfer>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + uart0: serial at ff560000 {
> + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
> + reg = <0xff560000 0x100>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <24000000>;
> + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac 5>, <&dmac 4>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_xfer>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart2: serial at ff570000 {
> + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
> + reg = <0xff570000 0x100>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <24000000>;
> + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac 9>, <&dmac 8>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart2m1_xfer>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart3: serial at ff580000 {
> + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
> + reg = <0xff580000 0x100>;
> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <24000000>;
> + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac 11>, <&dmac 10>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart3m0_xfer>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart4: serial at ff590000 {
> + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
> + reg = <0xff590000 0x100>;
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <24000000>;
> + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
> + clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac 13>, <&dmac 12>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart4m0_xfer>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart5: serial at ff5a0000 {
> + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
> + reg = <0xff5a0000 0x100>;
> + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <24000000>;
> + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
> + dmas = <&dmac 15>, <&dmac 14>;
> + clock-names = "baudclk", "apb_pclk";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart5m0_xfer>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + saradc: saradc at ff5e0000 {
> + compatible = "rockchip,rk3399-saradc";
> + reg = <0xff5e0000 0x100>;
> + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> + #io-channel-cells = <1>;
> + clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
> + clock-names = "saradc", "apb_pclk";
> + resets = <&cru SRST_SARADC_P>;
> + reset-names = "saradc-apb";
> + status = "disabled";
> + };
> +
> + timer: timer at ff660000 {
> + compatible = "rockchip,rk3288-timer";
> + reg = <0xff660000 0x20>;
> + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru PCLK_TIMER>, <&cru CLK_TIMER0>;
> + clock-names = "pclk", "timer";
> + };
> +
> + emmc: mmc at ffc50000 {
> + compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
> + reg = <0xffc50000 0x4000>;
> + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_EMMC>, <&cru CLK_EMMC>,
> + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + fifo-depth = <0x100>;
> + max-frequency = <200000000>;
> + power-domains = <&power RV1126_PD_NVM>;
> + status = "disabled";
> + };
> +
> + sdmmc: mmc at ffc60000 {
> + compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
> + reg = <0xffc60000 0x4000>;
> + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_SDMMC>, <&cru CLK_SDMMC>,
> + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + fifo-depth = <0x100>;
> + max-frequency = <200000000>;
> + status = "disabled";
> + };
> +
> + sdio: mmc at ffc70000 {
> + compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
> + reg = <0xffc70000 0x4000>;
> + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_SDIO>, <&cru CLK_SDIO>,
> + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + fifo-depth = <0x100>;
> + max-frequency = <200000000>;
> + power-domains = <&power RV1126_PD_SDIO>;
> + status = "disabled";
> + };
> +
> + pinctrl: pinctrl {
> + compatible = "rockchip,rv1126-pinctrl";
> + rockchip,grf = <&grf>;
> + rockchip,pmu = <&pmugrf>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gpio0: gpio0 at ff460000 {
> + compatible = "rockchip,gpio-bank";
> + reg = <0xff460000 0x100>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio1: gpio1 at ff620000 {
> + compatible = "rockchip,gpio-bank";
> + reg = <0xff620000 0x100>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio2: gpio2 at ff630000 {
> + compatible = "rockchip,gpio-bank";
> + reg = <0xff630000 0x100>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio3: gpio3 at ff640000 {
> + compatible = "rockchip,gpio-bank";
> + reg = <0xff640000 0x100>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio4: gpio4 at ff650000 {
> + compatible = "rockchip,gpio-bank";
> + reg = <0xff650000 0x100>;
> + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +};
> +
> +#include "rv1126-pinctrl.dtsi"
More information about the U-Boot
mailing list