[PATCH 2/4] ARM: dts: at91: sama7: Align with Linux Devicetree

[Sergiu Moga]

This patch makes sure that the Devicetree for the sama7
boards are aligned with the Devicetree from Linux. This
implies removing the GPIO compatible and replacing it
with the PINCTRL one, as well as unifying the SDMMC
pinctrl related subnodes under one single subnode.

Signed-off-by: Sergiu Moga <sergiu.moga at microchip.com>
---
 arch/arm/dts/at91-sama7g5ek-u-boot.dtsi |  2 +-
 arch/arm/dts/at91-sama7g5ek.dts         | 85 +++++++++++++++----------
 arch/arm/dts/sama7g5.dtsi               | 16 ++---
 3 files changed, 60 insertions(+), 43 deletions(-)

diff --git a/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi b/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi
index 601386788f..d294ddb54a 100644
--- a/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi
+++ b/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi
@@ -28,7 +28,7 @@
 	u-boot,dm-pre-reloc;
 };
 
-&pinctrl {
+&pioA {
 	u-boot,dm-pre-reloc;
 };
 
diff --git a/arch/arm/dts/at91-sama7g5ek.dts b/arch/arm/dts/at91-sama7g5ek.dts
index eaba0de3f7..aed84f15a1 100644
--- a/arch/arm/dts/at91-sama7g5ek.dts
+++ b/arch/arm/dts/at91-sama7g5ek.dts
@@ -690,46 +690,67 @@
 	};
 
 	pinctrl_sdmmc0_default: sdmmc0_default {
-		pinmux = <PIN_PA1__SDMMC0_CMD>,
-			 <PIN_PA3__SDMMC0_DAT0>,
-			 <PIN_PA4__SDMMC0_DAT1>,
-			 <PIN_PA5__SDMMC0_DAT2>,
-			 <PIN_PA6__SDMMC0_DAT3>,
-			 <PIN_PA7__SDMMC0_DAT4>,
-			 <PIN_PA8__SDMMC0_DAT5>,
-			 <PIN_PA9__SDMMC0_DAT6>,
-			 <PIN_PA10__SDMMC0_DAT7>,
-			 <PIN_PA0__SDMMC0_CK>,
-			 <PIN_PA2__SDMMC0_RSTN>,
-			 <PIN_PA14__SDMMC0_CD>,
-			 <PIN_PA11__SDMMC0_DS>;
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA3__SDMMC0_DAT0>,
+				 <PIN_PA4__SDMMC0_DAT1>,
+				 <PIN_PA5__SDMMC0_DAT2>,
+				 <PIN_PA6__SDMMC0_DAT3>,
+				 <PIN_PA7__SDMMC0_DAT4>,
+				 <PIN_PA8__SDMMC0_DAT5>,
+				 <PIN_PA9__SDMMC0_DAT6>,
+				 <PIN_PA10__SDMMC0_DAT7>;
 			slew-rate = <0>;
 			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA2__SDMMC0_RSTN>,
+				 <PIN_PA14__SDMMC0_CD>,
+				 <PIN_PA11__SDMMC0_DS>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
 	};
 
 	pinctrl_sdmmc1_default: sdmmc1_default {
-		pinmux = <PIN_PB29__SDMMC1_CMD>,
-			 <PIN_PB31__SDMMC1_DAT0>,
-			 <PIN_PC0__SDMMC1_DAT1>,
-			 <PIN_PC1__SDMMC1_DAT2>,
-			 <PIN_PC2__SDMMC1_DAT3>,
-			 <PIN_PB30__SDMMC1_CK>,
-			 <PIN_PB28__SDMMC1_RSTN>,
-			 <PIN_PC5__SDMMC1_1V8SEL>,
-			 <PIN_PC4__SDMMC1_CD>;
-		slew-rate = <0>;
-		bias-pull-up;
+		cmd_data {
+			pinmux = <PIN_PB29__SDMMC1_CMD>,
+				 <PIN_PB31__SDMMC1_DAT0>,
+				 <PIN_PC0__SDMMC1_DAT1>,
+				 <PIN_PC1__SDMMC1_DAT2>,
+				 <PIN_PC2__SDMMC1_DAT3>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PB30__SDMMC1_CK>,
+				 <PIN_PB28__SDMMC1_RSTN>,
+				 <PIN_PC5__SDMMC1_1V8SEL>,
+				 <PIN_PC4__SDMMC1_CD>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
 	};
 
 	pinctrl_sdmmc2_default: sdmmc2_default {
-		pinmux = <PIN_PD3__SDMMC2_CMD>,
-			 <PIN_PD5__SDMMC2_DAT0>,
-			 <PIN_PD6__SDMMC2_DAT1>,
-			 <PIN_PD7__SDMMC2_DAT2>,
-			 <PIN_PD8__SDMMC2_DAT3>,
-			 <PIN_PD4__SDMMC2_CK>;
-		slew-rate = <0>;
-		bias-pull-up;
+		cmd_data {
+			pinmux = <PIN_PD3__SDMMC2_CMD>,
+				 <PIN_PD5__SDMMC2_DAT0>,
+				 <PIN_PD6__SDMMC2_DAT1>,
+				 <PIN_PD7__SDMMC2_DAT2>,
+				 <PIN_PD8__SDMMC2_DAT3>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck {
+			pinmux = <PIN_PD4__SDMMC2_CK>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
 	};
 
 	pinctrl_spdifrx_default: spdifrx_default {
diff --git a/arch/arm/dts/sama7g5.dtsi b/arch/arm/dts/sama7g5.dtsi
index 97400dc18e..d38090d7dd 100644
--- a/arch/arm/dts/sama7g5.dtsi
+++ b/arch/arm/dts/sama7g5.dtsi
@@ -187,8 +187,8 @@
 			reg = <0xe0008000 0x20>;
 		};
 
-		pinctrl: pinctrl at e0014000 {
-			compatible = "microchip,sama7g5-gpio";
+		pioA: pinctrl at e0014000 {
+			compatible = "microchip,sama7g5-pinctrl";
 			reg = <0xe0014000 0x800>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
@@ -196,14 +196,10 @@
 				<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
-
-			pioA: pinctrl_default {
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				compatible = "microchip,sama7g5-pinctrl";
-			};
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		pmc: pmc at e0018000 {
-- 
2.25.1