[PATCH v3] spl: introduce SPL_XIP to config

[Nikita Shubin]

From: Nikita Shubin <n.shubin at yadro.com>

U-Boot and SPL don't necessary share the same location, so we might end
with U-Boot SPL in read-only memory (XIP) and U-Boot in read-write memory.

In case of non XIP boot mode, we rely on such variables as "hart_lottery"
and "available_harts_lock" which we use as atomics.

The problem is that CONFIG_XIP also propagate to main U-Boot, not only SPL,
so we need CONFIG_SPL_XIP to distinguish SPL XIP from other XIP modes.

This adds an option special for SPL to behave it in XIP manner and we don't
use hart_lottery and available_harts_lock, during start proccess.

Signed-off-by: Nikita Shubin <n.shubin at yadro.com>
---
v2->v3:
Rick Chen:
	- move SPL_XIP to arch/riscv/Kconfig right after XIP
	- change ae350_spl defconfig's to use SPL_XIP instead of XIP
---
 arch/riscv/Kconfig                   | 7 +++++++
 arch/riscv/cpu/cpu.c                 | 2 +-
 arch/riscv/cpu/start.S               | 4 ++--
 arch/riscv/include/asm/global_data.h | 2 +-
 arch/riscv/lib/asm-offsets.c         | 2 +-
 arch/riscv/lib/smp.c                 | 2 +-
 configs/ae350_rv32_spl_xip_defconfig | 2 +-
 configs/ae350_rv64_spl_xip_defconfig | 2 +-
 8 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 78e964db12..c042506a64 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -269,6 +269,13 @@ config XIP
 	  from a NOR flash memory without copying the code to ram.
 	  Say yes here if U-Boot boots from flash directly.
 
+config SPL_XIP
+	bool "Enable XIP mode for SPL"
+	help
+	  If SPL starts in read-only memory (XIP for example) then we shouldn't
+	  rely on lock variables (for example hart_lottery and available_harts_lock),
+	  this affects only SPL, other stages should proceed as non-XIP.
+
 config SHOW_REGS
 	bool "Show registers on unhandled exception"
 
diff --git a/arch/riscv/cpu/cpu.c b/arch/riscv/cpu/cpu.c
index 3ffcbbd23f..0f323b26b3 100644
--- a/arch/riscv/cpu/cpu.c
+++ b/arch/riscv/cpu/cpu.c
@@ -19,7 +19,7 @@
  * The variables here must be stored in the data section since they are used
  * before the bss section is available.
  */
-#ifndef CONFIG_XIP
+#if !CONFIG_IS_ENABLED(XIP)
 u32 hart_lottery __section(".data") = 0;
 
 /*
diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
index b7f21ab63e..de9d078da1 100644
--- a/arch/riscv/cpu/start.S
+++ b/arch/riscv/cpu/start.S
@@ -122,7 +122,7 @@ call_board_init_f_0:
 call_harts_early_init:
 	jal	harts_early_init
 
-#ifndef CONFIG_XIP
+#if !CONFIG_IS_ENABLED(XIP)
 	/*
 	 * Pick hart to initialize global data and run U-Boot. The other harts
 	 * wait for initialization to complete.
@@ -152,7 +152,7 @@ call_harts_early_init:
 	/* save the boot hart id to global_data */
 	SREG	tp, GD_BOOT_HART(gp)
 
-#ifndef CONFIG_XIP
+#if !CONFIG_IS_ENABLED(XIP)
 	la	t0, available_harts_lock
 	amoswap.w.rl zero, zero, 0(t0)
 
diff --git a/arch/riscv/include/asm/global_data.h b/arch/riscv/include/asm/global_data.h
index 095484a635..b3c79e1760 100644
--- a/arch/riscv/include/asm/global_data.h
+++ b/arch/riscv/include/asm/global_data.h
@@ -27,7 +27,7 @@ struct arch_global_data {
 #if CONFIG_IS_ENABLED(SMP)
 	struct ipi_data ipi[CONFIG_NR_CPUS];
 #endif
-#ifndef CONFIG_XIP
+#if !CONFIG_IS_ENABLED(XIP)
 	ulong available_harts;
 #endif
 };
diff --git a/arch/riscv/lib/asm-offsets.c b/arch/riscv/lib/asm-offsets.c
index f1fe089b3d..c4f48c8373 100644
--- a/arch/riscv/lib/asm-offsets.c
+++ b/arch/riscv/lib/asm-offsets.c
@@ -16,7 +16,7 @@ int main(void)
 {
 	DEFINE(GD_BOOT_HART, offsetof(gd_t, arch.boot_hart));
 	DEFINE(GD_FIRMWARE_FDT_ADDR, offsetof(gd_t, arch.firmware_fdt_addr));
-#ifndef CONFIG_XIP
+#if !CONFIG_IS_ENABLED(XIP)
 	DEFINE(GD_AVAILABLE_HARTS, offsetof(gd_t, arch.available_harts));
 #endif
 
diff --git a/arch/riscv/lib/smp.c b/arch/riscv/lib/smp.c
index ba992100ad..f8b756291f 100644
--- a/arch/riscv/lib/smp.c
+++ b/arch/riscv/lib/smp.c
@@ -45,7 +45,7 @@ static int send_ipi_many(struct ipi_data *ipi, int wait)
 			continue;
 		}
 
-#ifndef CONFIG_XIP
+#if !CONFIG_IS_ENABLED(XIP)
 		/* skip if hart is not available */
 		if (!(gd->arch.available_harts & (1 << reg)))
 			continue;
diff --git a/configs/ae350_rv32_spl_xip_defconfig b/configs/ae350_rv32_spl_xip_defconfig
index c7b6ea4730..67c1e35c55 100644
--- a/configs/ae350_rv32_spl_xip_defconfig
+++ b/configs/ae350_rv32_spl_xip_defconfig
@@ -11,7 +11,7 @@ CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_TARGET_AX25_AE350=y
 CONFIG_RISCV_SMODE=y
-CONFIG_XIP=y
+CONFIG_SPL_XIP=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xffff00
diff --git a/configs/ae350_rv64_spl_xip_defconfig b/configs/ae350_rv64_spl_xip_defconfig
index a197c97736..baee9bfe4a 100644
--- a/configs/ae350_rv64_spl_xip_defconfig
+++ b/configs/ae350_rv64_spl_xip_defconfig
@@ -12,7 +12,7 @@ CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_TARGET_AX25_AE350=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
-CONFIG_XIP=y
+CONFIG_SPL_XIP=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe70
-- 
2.35.1