[PATCH v1 0/2] serial_mxc: fixing reception

Johannes Schneider johannes.schneider at leica-geosystems.com
Mon Sep 5 10:53:58 CEST 2022


while writing to a imx-serial device is probably thoroughly tested - and obviosly works for the debug-serial - using a serial driver to read data received over the serial interface does not work reliably.

the patches in this series address issues found during the implementation of a custom uboot-command to query a coprocessor, connected to an imx8mm over uart4, for mainboard-identification strings


Johannes Schneider (2):
  serial: mxc: enable the RX pipeline
  serial: mxc: have putc use the TXFIFO

 drivers/serial/serial_mxc.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

-- 
2.25.1



More information about the U-Boot mailing list