[PATCH v9 05/15] stm32mp1: dk2: Add image information for capsule updates

[Etienne Carriere]

Hello Sughosh,

On Fri, 26 Aug 2022 at 11:57, Sughosh Ganu <sughosh.ganu at linaro.org> wrote:
>
> Enabling capsule update functionality on the platform requires
> populating information on the images that are to be updated using the
> functionality. Do so for the DK2 board.
>
> Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
> ---
> Changes since V8:
> * Use STM32MP_FIP_IMAGE_GUID for the FIP GUID value as suggested by
>   Yann
>
>  board/st/stm32mp1/stm32mp1.c       | 23 +++++++++++++++++++++++
>  include/configs/stm32mp15_common.h |  4 ++++
>  2 files changed, 27 insertions(+)
>
> diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
> index 9496890d16..bfec0a710d 100644
> --- a/board/st/stm32mp1/stm32mp1.c
> +++ b/board/st/stm32mp1/stm32mp1.c
> @@ -11,6 +11,7 @@
>  #include <clk.h>
>  #include <config.h>
>  #include <dm.h>
> +#include <efi_loader.h>
>  #include <env.h>
>  #include <env_internal.h>
>  #include <fdt_simplefb.h>
> @@ -87,6 +88,16 @@
>  #define USB_START_LOW_THRESHOLD_UV     1230000
>  #define USB_START_HIGH_THRESHOLD_UV    2150000
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +struct efi_fw_image fw_images[1];
> +
> +struct efi_capsule_update_info update_info = {
> +       .images = fw_images,
> +};
> +
> +u8 num_image_type_guids = ARRAY_SIZE(fw_images);
> +#endif /* EFI_HAVE_CAPSULE_SUPPORT */
> +
>  int board_early_init_f(void)
>  {
>         /* nothing to do, only used in SPL */
> @@ -670,6 +681,18 @@ int board_init(void)
>
>         setup_led(LEDST_ON);
>
> +#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
> +       if (board_is_stm32mp15x_dk2()) {

Sorry for this late comment.
Should this be restricted to mp15-dk2?
I would remove the test and apply when CONFIG_EFI_HAVE_CAPSULE_SUPPORT
is enable.


> +               efi_guid_t image_type_guid = STM32MP_FIP_IMAGE_GUID;
> +               guidcpy(&fw_images[0].image_type_id, &image_type_guid);
> +               fw_images[0].fw_name = u"STM32MP-FIP";
> +               /*
> +                * For FWU multi bank update, the image
> +                * index will be computed at runtime
> +                */
> +               fw_images[0].image_index = 0;
> +       }
> +#endif
>         return 0;
>  }
>
> diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h
> index c5412ffeb3..bb19dae945 100644
> --- a/include/configs/stm32mp15_common.h
> +++ b/include/configs/stm32mp15_common.h
> @@ -34,6 +34,10 @@
>  #define CONFIG_SERVERIP                 192.168.1.1
>  #endif
>
> +#define STM32MP_FIP_IMAGE_GUID \
> +       EFI_GUID(0x19d5df83, 0x11b0, 0x457b, 0xbe, 0x2c, \
> +                0x75, 0x59, 0xc1, 0x31, 0x42, 0xa5)
> +
>  /*****************************************************************************/
>  #ifdef CONFIG_DISTRO_DEFAULTS
>  /*****************************************************************************/
> --
> 2.34.1
>