[PATCH 1/2] mmc: sdhci: Add new quirks for SUPPORT_SINGLE

[Kunihiko Hayashi]

This patch defines a quirk to disable the block count
for single block transactions.

This is similar to Linux kernel commit d3fc5d71ac4d
("mmc: sdhci: add a quirk for single block transactions").

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko at socionext.com>
---
 drivers/mmc/sdhci.c | 8 +++++---
 include/sdhci.h     | 1 +
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index bf989a594f7e..a80ad8329a38 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -211,7 +211,7 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
 	unsigned int stat = 0;
 	int ret = 0;
 	int trans_bytes = 0, is_aligned = 1;
-	u32 mask, flags, mode;
+	u32 mask, flags, mode = 0;
 	unsigned int time = 0;
 	int mmc_dev = mmc_get_blk_desc(mmc)->devnum;
 	ulong start = get_timer(0);
@@ -273,10 +273,12 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
 	/* Set Transfer mode regarding to data flag */
 	if (data) {
 		sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
-		mode = SDHCI_TRNS_BLK_CNT_EN;
+
+		if (!(host->quirks & SDHCI_QUIRK_SUPPORT_SINGLE))
+			mode = SDHCI_TRNS_BLK_CNT_EN;
 		trans_bytes = data->blocks * data->blocksize;
 		if (data->blocks > 1)
-			mode |= SDHCI_TRNS_MULTI;
+			mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_BLK_CNT_EN;
 
 		if (data->flags == MMC_DATA_READ)
 			mode |= SDHCI_TRNS_READ;
diff --git a/include/sdhci.h b/include/sdhci.h
index 88f1917480b6..24b4599b857d 100644
--- a/include/sdhci.h
+++ b/include/sdhci.h
@@ -247,6 +247,7 @@
 #define SDHCI_QUIRK_WAIT_SEND_CMD	(1 << 6)
 #define SDHCI_QUIRK_USE_WIDE8		(1 << 8)
 #define SDHCI_QUIRK_NO_1_8_V		(1 << 9)
+#define SDHCI_QUIRK_SUPPORT_SINGLE	(1 << 10)
 
 /* to make gcc happy */
 struct sdhci_host;
-- 
2.17.1