[PATCH 2/2] mmc: f_sdh30: Add support for F_SDH30_E51

[Kunihiko Hayashi]

Add Socionext F_SDH30_E51 IP support. The features of this IP includes
CMD/DAT line delay and force card insertion mode for non-removable cards.
And the IP needs to add some quirks.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko at socionext.com>
---
 drivers/mmc/Kconfig   |  4 +--
 drivers/mmc/f_sdh30.c | 64 +++++++++++++++++++++++++++++++++++++++++--
 2 files changed, 64 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 0dcec8adcee8..c30f20cba5f2 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -577,12 +577,12 @@ config MMC_SDHCI_IPROC
 	  If unsure, say N.
 
 config MMC_SDHCI_F_SDH30
-	bool "SDHCI support for Fujitsu Semiconductor F_SDH30"
+	bool "SDHCI support for Fujitsu Semiconductor/Socionext F_SDH30"
 	depends on BLK && DM_MMC
 	depends on MMC_SDHCI
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
-	  Needed by some Fujitsu SoC for MMC / SD / SDIO support.
+	  Needed by some Fujitsu/Socionext SoC for MMC / SD / SDIO support.
 	  If you have a controller with this interface, say Y or M here.
 	  If unsure, say N.
 
diff --git a/drivers/mmc/f_sdh30.c b/drivers/mmc/f_sdh30.c
index 3a85d9e348ab..6b950edab74e 100644
--- a/drivers/mmc/f_sdh30.c
+++ b/drivers/mmc/f_sdh30.c
@@ -11,13 +11,46 @@
 #include <malloc.h>
 #include <sdhci.h>
 
+#define F_SDH30_ESD_CONTROL		0x124
+#define F_SDH30_CMD_DAT_DELAY		BIT(9)
+
+#define F_SDH30_TEST			0x158
+#define F_SDH30_FORCE_CARD_INSERT	BIT(6)
+
+struct f_sdh30_data {
+	void (*init)(struct udevice *dev);
+	u32 quirks;
+};
+
 struct f_sdh30_plat {
 	struct mmc_config cfg;
 	struct mmc mmc;
+
+	bool enable_cmd_dat_delay;
+	const struct f_sdh30_data *data;
 };
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static void f_sdh30_e51_init(struct udevice *dev)
+{
+	struct f_sdh30_plat *plat = dev_get_plat(dev);
+	struct sdhci_host *host = dev_get_priv(dev);
+	u32 val;
+
+	if (plat->enable_cmd_dat_delay) {
+		val = sdhci_readl(host, F_SDH30_ESD_CONTROL);
+		val |= F_SDH30_CMD_DAT_DELAY;
+		sdhci_writel(host, val, F_SDH30_ESD_CONTROL);
+	}
+
+	if (plat->cfg.host_caps & MMC_CAP_NONREMOVABLE) {
+		val = sdhci_readl(host, F_SDH30_TEST);
+		val |= F_SDH30_FORCE_CARD_INSERT;
+		sdhci_writel(host, val, F_SDH30_TEST);
+	}
+}
+
 static int f_sdh30_sdhci_probe(struct udevice *dev)
 {
 	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
@@ -25,6 +58,8 @@ static int f_sdh30_sdhci_probe(struct udevice *dev)
 	struct sdhci_host *host = dev_get_priv(dev);
 	int ret;
 
+	plat->data = (const struct f_sdh30_data *)dev_get_driver_data(dev);
+
 	ret = mmc_of_parse(dev, &plat->cfg);
 	if (ret)
 		return ret;
@@ -33,6 +68,9 @@ static int f_sdh30_sdhci_probe(struct udevice *dev)
 	host->mmc->dev = dev;
 	host->mmc->priv = host;
 
+	if (plat->data && plat->data->quirks)
+		host->quirks |= plat->data->quirks;
+
 	ret = sdhci_setup_cfg(&plat->cfg, host, 200000000, 400000);
 	if (ret)
 		return ret;
@@ -41,18 +79,29 @@ static int f_sdh30_sdhci_probe(struct udevice *dev)
 
 	mmc_set_clock(host->mmc, host->mmc->cfg->f_min, MMC_CLK_ENABLE);
 
-	return sdhci_probe(dev);
+	ret = sdhci_probe(dev);
+	if (ret)
+		return ret;
+
+	if (plat->data && plat->data->init)
+		plat->data->init(dev);
+
+	return 0;
 }
 
 static int f_sdh30_of_to_plat(struct udevice *dev)
 {
 	struct sdhci_host *host = dev_get_priv(dev);
+	struct f_sdh30_plat *plat = dev_get_plat(dev);
 
 	host->name = strdup(dev->name);
 	host->ioaddr = dev_read_addr_ptr(dev);
 	host->bus_width = dev_read_u32_default(dev, "bus-width", 4);
 	host->index = dev_read_u32_default(dev, "index", 0);
 
+	plat->enable_cmd_dat_delay =
+		dev_read_bool(dev, "socionext,enable-cmd-dat-delay");
+
 	return 0;
 }
 
@@ -63,8 +112,19 @@ static int f_sdh30_bind(struct udevice *dev)
 	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
 }
 
+static const struct f_sdh30_data f_sdh30_e51_data = {
+	.init = f_sdh30_e51_init,
+	.quirks = SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_SUPPORT_SINGLE,
+};
+
 static const struct udevice_id f_sdh30_mmc_ids[] = {
-	{ .compatible = "fujitsu,mb86s70-sdhci-3.0" },
+	{
+		.compatible = "fujitsu,mb86s70-sdhci-3.0",
+	},
+	{
+		.compatible = "socionext,f-sdh30-e51-mmc",
+		.data = (ulong)&f_sdh30_e51_data,
+	},
 	{ }
 };
 
-- 
2.17.1